• Fitting Position: Right
• Vehicle Identification Number (VIN) from: F980774
• for OE number: 0015407317, 15407317
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 590
• Number of pins: 4
• Weight [g]: 109
• Manufacturer: DENSO
• Name: DN DOX-2033

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Right
• Vehicle Identification Number (VIN) from: F980774
• for OE number: 0015407517, 15407517
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 98
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Left
• Vehicle Identification Number (VIN) from: F980774
• for OE number: 0015407117, 15407117
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 425
• Number of pins: 4
• Weight [g]: 101
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Right
• Vehicle Identification Number (VIN) to: F980773
• Exhaust System: for pre-catalytic converter
• for OE number: 0015401017
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 655
• Number of pins: 4
• Weight [g]: 114
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Right
• Vehicle Identification Number (VIN) to: F980773
• for OE number: 0015401117
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 595
• Number of pins: 4
• Weight [g]: 102
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Left
• Vehicle Identification Number (VIN) to: F980773
• for OE number: 0015401217
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 320
• Number of pins: 4
• Weight [g]: 92
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Fitting Position: Left
• Vehicle Identification Number (VIN) to: F980773
• for OE number: 0015400817, 0005407517
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 815
• Number of pins: 4
• Weight [g]: 117
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
KLASA S (W140), 02.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA S (W140), 02.9
(kvaliteediklass: Q)"

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-BM-009
• Manufacturer: NTY

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Vehicle Identification Number (VIN) to: F980773, F980774
• Component Number: 800
• not for Component Number: 801
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: Left, Right, before catalytic converter, after catalytic converter

• Construction Year to: 02.2001
• Transmission Type: Automatic Transmission
• Fitting Position: Left, before catalytic converter
• Vehicle Identification Number (VIN) from: F980774
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 650
• Connector Shape: round
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 650
• Number of circuits: 4
• Weight [kg]: 0.11
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Vehicle Identification Number (VIN) from: F980774
• Component Number: 801
• not for Component Number: 800
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: Left, Right, before catalytic converter, after catalytic converter Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Fitting Position: Left
• Vehicle Identification Number (VIN) to: F980773
• Exhaust System: for pre-catalytic converter
• for OE number: UNIVERSAL fit
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Construction Year from: 10.1997
• Construction Year to: 02.2001
• Engine Code: M 113.944
• Voltage [V]: 12
• Length [mm]: 970
• Number of circuits: 4
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV077

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 830
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV031
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) from: F 980774
• Fitting Position: Left
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 330
• Weight [kg]: 0.08
• Name: SW 33 10 3197
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 02.2001
• Transmission Type: Automatic Transmission
• Fitting Position: Left, before catalytic converter
• Vehicle Identification Number (VIN) from: F980774
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: round
• Thread Size: M18 x 1,5
• Length [mm]: 550
• Cable Length [mm]: 570
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.15
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 820
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV600
• Manufacturer: ESEN SKV

• Construction Year to: 02.2001
• Transmission Type: Automatic Transmission
• Fitting Position: Left, before catalytic converter
• Vehicle Identification Number (VIN) from: F980774
• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 720
• Connector Shape: round
• Number of pins: 4
• Weight [kg]: 0.117
• for OE number: 002 540 08 17
• Socket colour: black
• Thread Size: M18 x 1,5
• Cable Length [mm]: 720
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 600
• Number of circuits: 4
• Cable Length [mm]: 600
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Vehicle Identification Number (VIN) from: F 980774
• Fitting Position: Right
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 650
• Weight [kg]: 0.095
• Name: SW 33 10 3201
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Length [mm]: 900
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 900
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year to: 02.2001
• Transmission Type: Automatic Transmission
• Fitting Position: Left, before catalytic converter
• Vehicle Identification Number (VIN) from: F980774
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 4
• Connector Shape: round
• Length [mm]: 880
• Cable Length [mm]: 870
• Number of circuits: 4
• Weight [kg]: 0.15
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) to: F980773, F 980774
• Component Number: 800
• not for Component Number: 801
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, Left, after catalytic converter, Right

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: both sides, before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: F980774
• Component Number: 801
• not for Component Number: 800
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, Left, after catalytic converter, Right Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Fitting Position: Left
• Vehicle Identification Number (VIN) from: F980774
• Exhaust System: for pre-catalytic converter
• for OE number: UNIVERSAL fit
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 450
• for article number: 81633E
• Quality: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Left
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) from: F980774
• Component Number: 801
• not for Component Number: 800
• Number of circuits: 4
• Overall Length [mm]: 830
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1997
• Construction Year to: 02.2001
• Vehicle Identification Number (VIN) from: F980774
• Engine Code: 113.944
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 870
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Name: VA 368437
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: Left
• Vehicle Identification Number (VIN) from: F980774
• for OE number: 0015407417, 15400717
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 900
• Number of pins: 4
• Weight [g]: 103
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"

• Construction Year to: 02.2001
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Right
• Vehicle Identification Number (VIN) from: F980774
• Component Number: 801
• not for Component Number: 800
• Number of circuits: 4
• Overall Length [mm]: 610
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 02.2001
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Right
• Vehicle Identification Number (VIN) to: F 980774
• Number of circuits: 4
• Overall Length [mm]: 670
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1997
• Construction Year to: 02.2001
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: Right
• Vehicle Identification Number (VIN) from: F980774
• Cable Length [mm]: 670
• Technical Information Number: Universal 77015
• Manufacturer: FAE