Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Left,
Right, Lower - Quantity per packing unit: 2
- Thickness 1 [mm]: 43
- Inner Diameter 1 [mm]: 12.1
- Outer Diameter 1 [mm]: 32.2
- Manufacturer: DELPHI
- Name: DE TD450W
- Quantity per packing unit: 2
- Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Length [mm]: 38
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 36
- Weight [kg]: 0.119
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: LEMFORDER
- Name: LMI 1112301
- Installatsiooni pool: Esisild
- Õõtshoovad: Tõmbevarras
- Hulgaühik: Komplekt
- Quality class: PJ
- Name: Tension rod left=right
Lisainfo: Track control arm, rear
-
Fitting Position: Rear Axle Upper,
inner - Control/Trailing Arm Type: Control Arm
- Rod/Strut: Push Rod
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Name: LMI 2963101
-
Fitting Position: Front,
Rear Axle, Upper - Rod/Strut: Pull Rod
-
Alternative Repair Kit: V30-
7541 - Weight [kg]: 0.828
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: with fastening material
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Width [mm]: 370,
63 - Height [mm]: 40
-
Fitting Position: Rear Axle,
Lower - Weight [kg]: 0.858
- Rod/Strut: Push Rod
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle,
Upper, both sides, Front - Rod/Strut: Pull Rod
- Article number of recommended accessories: 21685 01
- Name: LMI 2962901
- Manufacturer: LEMFÃRDER
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Name: COC 49398571
- Manufacturer: CORTECO
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
-
paired article number: V30-
7542 - Weight [kg]: 1.189
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Rod/Strut: Pull Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093510
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LEMFORDER
- Name: LMI 2073103
- Quantity Unit: Set
- Fitting Position: Rear Axle Upper
- Rod/Strut: Pull Rod
- Supplementary Article/Info 2: with fastening material
-
paired article number: V30-
7131 - Weight [kg]: 0.826
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle,
both sides, Upper, Front - Name: LMI 3938301
- Manufacturer: LEMFÃRDER
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Lisainfo: 29630 01 LEM
- Additional information: 29630 01 LEM
- Quantity Unit: Set
-
Fitting Position: both sides,
Rear Axle Upper -
paired article number: V30-
7138 - Rod/Strut: Camber Link
- Supplementary Article/Info 2: with fastening material
- Weight [kg]: 1.189
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
- Rod/Strut: Pull Rod
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal, üleval - Pikkus (mm): 247
- Garantii: Garantii 3 aastat või kuni 75 000 km
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
- Material: Sheet Steel
- SVHC: No SVHC present!
- Name: LU 821093610
- Manufacturer: FAG
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LEMFORDER
- Name: LMI 1097704
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 245
- Thread Size: M10x1
- Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEYLE
- Fitting Position: Rear Axle
- Rod/Strut: Push Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: CORTECO
-
Fitting Position: Rear Axle Lower,
Rear, both sides - Rod/Strut: Guide Rod
- Length [mm]: 315
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Rod/Strut: Push Rod
- Fitting Position: Rear Axle
- Weight [kg]: 6.06
- for OE number: 210 350 38 06 S2
- Supplementary Article/Info 2: with fastening material
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks