Lisainfo: Control Arm-/Trailing Arm Bush

• Installatsiooni pool: Tagasild, kahepoolne
• Õõtshoovad: Stabilisaatori otsavarras
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Coupling Rod
• Base body material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with nut
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Thread Size 1: M10x1.5
• Width [mm]: 40
• Height [mm]: 43
• Length [mm]: 200
• Manufacturer: DELPHI
• Name: DE TC2031

• Installatsiooni pool: Tagasild
• Õõtshoovad: Stabilisaatori otsavarras
• Pikkus (mm): 200
• Keermemõõt 2: M10x1.5
• Materjal: Plastik
• Kaal (kg): 0,11
• Name: DY 30-72632
• Manufacturer: DYS

• Length [mm]: 200
• Thickness [mm]: 43, 40
• Inner Diameter [mm]: 8.6
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 13.5
• Material: Plastic
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.108
• Supplementary Article/Info 2: with nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Õõtshoovad: Stabilisaatori otsavarras
• Hulgaühik: Komplekt
• Jämedus/Tugevus (mm): 40, 43
• pikkus [mm]: 200
• Siseläbimõõt [mm]: 9
• Keermepikkus (mm): 13,5
• Väliskeerme mõõde: M10 x 1,5
• Materjal: Plastik
• Quality class: PJ
• Name: Stabilizer link left=right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.2
• Required quantity: 2
• Material: PVC
• Rod/Strut: Coupling Rod
• Packaging length [cm]: 31
• Packaging width [cm]: 8
• Packaging height [cm]: 4
• Manufacturer: MONROE

• Length [mm]: 200
• Thickness [mm]: 43, 40
• Inner Diameter [mm]: 8.6
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 13.5
• Material: Plastic
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.108
• Supplementary Article/Info 2: with nut
• Observe service information:
• Name: SW 10 79 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• Required quantity: 2
• paired article number: VKDS 448008
• Length [mm]: 200
• Bore Diameter [mm]: 8
• Material: Plastic
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M10 x 1,5
• Name: SK VKDS448008
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Material: Plastic
• Length [mm]: 200
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818008210

• Fitting Position: Rear Axle, both sides
• Rod/Strut: Suspension Rod
• Material: Plastic
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LEMFORDER
• Name: LMI 1076403

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Length [mm]: 200
• Thread Size: MM10X1.5 RHT
• Material: Plastic
• Rod/Strut: Suspension Rod
• paired article number: 260084
• Weight [kg]: 0.118
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 229
• Thread Size 1: M10x1,5
• Inner Diameter [mm]: 8
• Material: Plastic
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 200
• Thread Size: M10x1.5
• Pipe Diameter [mm]: 13
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 245
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild
• Õõtshoovad: Stabilisaatori otsavarras
• Pikkus (mm): 200
• Keermemõõt 2: M10x1.5
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Guide Rod
• Manufacturer: JP GROUP
• Lisainfo: Track control arm, lower, rear
• Additional information: Track control arm, lower, rear

• Installatsiooni pool: Esisild
• Õõtshoovad: Tõmbevarras
• Hulgaühik: Komplekt
• Quality class: PJ
• Name: Tension rod left=right

Lisainfo: Track control arm, rear

• Fitting Position: Rear Axle, both sides
• Alternative Repair Kit: G8-586, G8-587
• Quantity Unit: Set
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Upper, inner
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Push Rod
• Manufacturer: GSP ZAWIESZENIE

Lisainfo: Track control arm, upper, rear

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Camber Link
• Article number of recommended accessories: 21685 01
• Manufacturer: LEMFORDER
• Name: LMI 2963101

• Fitting Position: Front, Rear Axle, Upper
• Rod/Strut: Pull Rod
• Alternative Repair Kit: V30-7541
• Weight [kg]: 0.828
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild mõlemapoolselt
• Õõtshoovad: Stabilisaatori otsavarras
• Väliskeere 2 [mm]: M10x1,5
• Pikkus (mm): 201
• Kaal (kg): 0,18
• Manufacturer: RTS

• Rod/Strut: Pull Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 370, 63
• Height [mm]: 40
• Fitting Position: Rear Axle, Lower
• Weight [kg]: 0.858
• Rod/Strut: Push Rod
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Upper, both sides, Front
• Rod/Strut: Pull Rod
• Article number of recommended accessories: 21685 01
• Name: LMI 2962901
• Manufacturer: LEMFÖRDER

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Guide Rod
• Name: COC 49398571
• Manufacturer: CORTECO

• Fitting Position: Rear Axle
• Rod/Strut: Camber Link
• paired article number: V30-7542
• Weight [kg]: 1.189
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Rod/Strut: Pull Rod
• Material: Sheet Steel
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821093510

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Camber Link
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LEMFORDER
• Name: LMI 2073103

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• Quantity Unit: Set
• Fitting Position: Rear Axle Upper
• Rod/Strut: Pull Rod
• Supplementary Article/Info 2: with fastening material
• paired article number: V30-7131
• Weight [kg]: 0.826
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Rod/Strut: Pull Rod
• Fitting Position: Rear Axle, both sides, Upper, Front
• Name: LMI 3938301
• Manufacturer: LEMFÖRDER

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Rod/Strut: Camber Link
• Length [mm]: 298
• Material: Sheet Steel
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: with fastening material
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle, Lower, both sides, Front
• Rod/Strut: Push Rod
• Article number of recommended accessories: 21685 01
• Manufacturer: LEMFORDER
• Lisainfo: 29630 01 LEM
• Additional information: 29630 01 LEM

• Fitting Position: Rear Axle, Upper
• Rod/Strut: Guide Rod
• Material: Metal
• Length [mm]: 297
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Quantity Unit: Set
• Fitting Position: both sides, Rear Axle Upper
• paired article number: V30-7138
• Rod/Strut: Camber Link
• Supplementary Article/Info 2: with fastening material
• Weight [kg]: 1.189
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Rod/Strut: Pull Rod
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, üleval
• Pikkus (mm): 247
• Garantii: Garantii 3 aastat või kuni 75 000 km
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Rod/Strut: Camber Link
• Material: Sheet Steel
• SVHC: No SVHC present!
• Name: LU 821093610
• Manufacturer: FAG

• Fitting Position: Rear Axle, Lower, both sides, Front
• Rod/Strut: Push Rod
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LEMFORDER
• Name: LMI 1097704

• Fitting Position: Rear Axle Upper, Rear, both sides
• Õõtshoovad: Juhtvarras
• Pikkus (mm): 297
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Guide Rod
• Length [mm]: 245
• Thread Size: M10x1
• Material: Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEYLE

• Fitting Position: Rear Axle
• Rod/Strut: Push Rod
• Material: Sheet Steel
• SVHC: No SVHC present!
• Manufacturer: FAG

• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: CORTECO

• Fitting Position: Rear Axle Lower, Rear, both sides
• Rod/Strut: Guide Rod
• Length [mm]: 315
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Rod/Strut: Push Rod
• Fitting Position: Rear Axle
• Weight [kg]: 6.06
• for OE number: 210 350 38 06 S2
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.