• External Thread Size: M12 x 1,5
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.177
• Name: MONTAA?IKOMPLEKT,ROOLISšSTEEM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity Unit: Kit
• Net weight [kg]: 0.3
• Name: REMONDIKOMPLEKT,OOTSHOOB
• Manufacturer: NK

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.129
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Push Rod
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: MONTAA?IKOMPLEKT,ROOLISšSTEEM
• Manufacturer: MEY

• for OE number: 140 350 1170
• Fitting Position: Rear Axle
• Control/Trailing Arm Type: Control Arm
• Name: MONTAA?IKOMPLEKT,ROOLISšSTEEM
• Manufacturer: TRU

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Steel, Sheet Steel
• Supplementary Article/Info 2: with bearing
• Rod/Strut: Pull Rod
• Manufacturer: MERTZ

• Fitting Position: Front Axle, both sides
• Name: REMONDIKOMPLEKT,OOTSHOOB
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle both sides, Front
• Length 1 [mm]: 245
• Thread Size 1: MM10X1.25R
• Control/Trailing Arm Type: Control Arm
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Right, Rear Axle Left
• Thread Size: M12x1,5
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: MONTAA?IKOMPLEKT,ROOLISšSTEEM
• Manufacturer: MEY

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: Trailing Arm
• Length [mm]: 314
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, both sides, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track control arm, lower, rear
• Additional information: Track control arm, lower, rear

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track control arm, rear
• Additional information: Track control arm, rear

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, both sides, Upper
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: Trailing Arm
• Length [mm]: 299
• Manufacturer: KAMOKA

• Fitting Position: Front, Rear Axle Right, Rear Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Push Rod
• Length [mm]: 315
• Material: Sheet Steel
• Quantity Unit: Piece
• Name: Ootshoovad - K„„ndmik DB T. W124/201
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP-GROUP
• Lisainfo: Track control arm, upper, rear
• Additional information: Track control arm, upper, rear

• Fitting Position: Rear Axle Left, Rear Axle Right, inner, Upper
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front, Rear Axle Left, Rear Axle Right
• Length from [mm]: 245
• Width [mm]: 75
• Height [mm]: 40
• Material: Sheet Steel
• Rod/Strut: Pull Rod
• Quality class: PJ
• Name: Control arm left=right

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Rear Axle
• Net weight [kg]: 0.605
• Length [mm]: 247
• Name: OMG G41.3661
• Manufacturer: OMG

• Fitting Position: Upper, Rear Axle Right, Rear Axle Left, Rear
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Camber Link
• Length [mm]: 298
• Material: Sheet Steel
• Quantity Unit: Piece
• Name: Ootshoovad - K„„ndmik DB T. W124/201
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right, inner, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: Rear Axle, outer, Rear, Left, Upper, Right
• Thread Size 2: Bush 12.0
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 350
• Width [mm]: 70
• Height [mm]: 38
• Manufacturer: DELPHI
• Name: DE TC2033

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear
• Material: Cast Steel
• Supplementary Article/Info 2: with bearing, with nut, with ball joint
• Manufacturer: MERTZ

• new version:
• Length [mm]: 245
• Width [mm]: 75
• Height [mm]: 40
• Material: Sheet Steel
• Rod/Strut: Pull Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Rear Axle Left, Front, Rear Axle Right
• Weight [kg]: 0.698
• Supplementary Article/Info 2: with bearing
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Base body material: Cast Iron
• Fitting Position: Rear Axle
• Net weight [kg]: 0.423
• Thread Size: RHT M10x1
• Thread Size 1: RHT M10x1
• Name: OMG G41.3648
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Rear Axle
• Net weight [kg]: 0.78
• Length [mm]: 314
• Name: OMG G41.3652
• Manufacturer: OMG

• old version:
• Material: Sheet Steel
• Rod/Strut: Pull Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Weight [kg]: 0.7
• Supplementary Article/Info 2: with bearing
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Lower
• Length [mm]: 314
• Inner Diameter [mm]: 12
• Name: ALT 78644AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Push Rod
• Manufacturer: CORTECO
• Name: COC 49398899

• Control/Trailing Arm Type: Control Arm
• Manufacturer: AUTO-GH

Fitting Position: Rear Axle both sides, Rear Axle, Right, Left, Rear Axle Right, Rear Axle Left, Rear Axle Upper, Upper

• new version:
• Length [mm]: 245
• Width [mm]: 75
• Height [mm]: 40
• Material: Sheet Steel
• Rod/Strut: Pull Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper, Rear Axle Left, Front, Rear Axle Right
• Weight [kg]: 0.698
• Supplementary Article/Info 2: with bearing
• Manufacturer: SWAG
• Name: SW 10 79 0072

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Right, Left, Front, Upper
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Coupling Rod
• Name: COC 49398945
• Manufacturer: CORTECO

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Upper
• Length [mm]: 298
• Inner Diameter [mm]: 12
• Name: ALT 79743AL
• Manufacturer: ALTE AUTOMOTIVE

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower
• Control/Trailing Arm Type: Control Arm
• Warranty: 3 years warranty
• Weight [kg]: 0.8
• Name: CE 04SKV032
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Lower
• Control/Trailing Arm Type: Control Arm
• Warranty: 3 years warranty
• Weight [kg]: 0.8
• Name: CE 04SKV031
• Manufacturer: ESEN SKV

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Upper
• Length [mm]: 247
• Inner Diameter [mm]: 12
• Name: ALT 78354AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Lower, Rear
• Width [mm]: 41
• Height [mm]: 76
• Weight [kg]: 0.632
• Material: Steel
• Control/Trailing Arm Type: Trailing Arm
• Max. Length [mm]: 283
• Name: Tension rod left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• new version:
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Lower, Front
• Weight [kg]: 0.708
• Supplementary Article/Info 2: with bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD

• Control/Trailing Arm Type: Control Arm
• Manufacturer: AUTO-GH

Fitting Position: Rear Axle both sides, Rear Axle, Right, Left, Rear Axle Right, Rear Axle Left

• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Name: Kinnitus - K„„ndmik DB P. W124/201 D.
• Manufacturer: MAX

• Fitting Position: Rear Axle Upper, Front, both sides
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 305
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• new version:
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Upper, both sides, Rear
• Weight [kg]: 0.743
• Supplementary Article/Info 2: with bearing
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR GàRNY
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Lower
• Length [mm]: 245
• Thread Size: M10 x 1
• Cone Size [mm]: 11.3
• Inner Diameter [mm]: 12
• Name: ALT 77981AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear, Rear Axle both sides, Lower
• Required quantity: 2
• paired article number: VKDS 428024 B
• Length [mm]: 245
• Bore Ø [mm]: 12.2
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Thread Size 1: M10 x 1
• Manufacturer: SKF
• Name: SK VKDS428024B

• Fitting Position: Rear Axle, Lower, in front of axle, Left, Right
• Thread Size 1: M10x1.25
• Material: Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 280
• Width [mm]: 39
• Height [mm]: 65
• Manufacturer: DELPHI
• Name: DE TC389

• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Lower, Rear, Rear Axle Right
• Weight [kg]: 0.536
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Name: Ootshoovad - K„„ndmik DB T. W124/201
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Fitting Position: Front Axle
• Suspension: for vehicles without sports suspension
• Quantity Unit: Set
• Weight [kg]: 1.252
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Lower, Rear, Rear Axle Right
• Weight [kg]: 0.536
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, Lower, Front
• Required quantity: 2
• paired article number: VKDS 428003
• Length [mm]: 314.3
• Bore Ø [mm]: 12.2
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Push Rod
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS428003
• Manufacturer: SKF

• Rod/Strut: Push Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.892
• Supplementary Article/Supplementary Info: with attachment material
• Name: Ootshoob, k„„ndmik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Upper
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Coupling Rod
• Name: COC 49398877
• Manufacturer: CORTECO

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Height [mm]: 48
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 65
• Supplementary Article/Supplementary Info: with accessories
• replacement in pairs recommended:
• Required quantity: 2
• Name: REMONDIKOMPLEKT,OOTSHOOB
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Rod/Strut: Push Rod
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Upper
• Weight [kg]: 0.963
• Supplementary Article/Supplementary Info: with attachment material
• Name: Ootshoob, k„„ndmik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Rear Axle both sides, Upper
• Required quantity: 2
• paired article number: VKDS 428002
• Length [mm]: 298.1
• Bore Ø [mm]: 12.2
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Camber Link
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS428002
• Manufacturer: SKF

• Fitting Position: Rear Axle Lower, Front, both sides
• Supplementary Article/Supplementary Info: with accessories
• Control/Trailing Arm Type: Control Arm
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: F 204091
• Fitting Position: Front Axle, both sides
• Control/Trailing Arm Type: for control arm
• Name: Kinnitus - K„„ndmik DB P. W124/201
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: F 204092
• Fitting Position: Front Axle, both sides
• Control/Trailing Arm Type: for control arm
• Name: Kinnitus - K„„ndmik DB P. W124/201 D.
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Sheet Steel
• paired article number: 72-0799
• Name: Roolimine - K„„ndmik DB P. W124 LE DOLNY
• Manufacturer: MAX
• Lisainfo: MGZ-106005
• Additional information: MGZ-106005

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Right
• Net weight [kg]: 5.55
• Diameter [mm]: 18
• paired article number: G40.3612/C
• Diameter 1 [mm]: 18
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.3613/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Left
• Net weight [kg]: 5.55
• Diameter [mm]: 18
• paired article number: G40.3613/C
• Diameter 1 [mm]: 18
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.3612/C
• Manufacturer: OMG

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Manufacturer: JP GROUP
• Lisainfo: Wishbone, front, left
• Additional information: Wishbone, front, left

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Manufacturer: JP GROUP
• Lisainfo: Wishbone, front, right
• Additional information: Wishbone, front, right

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Material: Sheet Steel
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
MERCEDES 124 84-93
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MERCEDES 124 84-93
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Material: Sheet Steel
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
MERCEDES 124 84-93
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MERCEDES 124 84-93
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Right, outer, Lower, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• paired article number: V30-7145
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 5.277
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paired article number: 05040
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 12.2
• Supplementary Article/Info 2: with bearing
• Name: Roolimine - K„„ndmik DB P. W124 LE DOLNY
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 05023
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 5.277
• Supplementary Article/Info 2: with bearing
• Name: Roolimine - K„„ndmik DB P. W124 PR DOLNY
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Suspension: for vehicles without sports suspension
• Control/Trailing Arm Type: Control Arm
• paired article number: 821 0186 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• paired article number: 10 73 0014
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 5.277
• Supplementary Article/Info 2: with bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 10 73 0015
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 5.234
• Supplementary Article/Info 2: with bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Weight [kg]: 7.18
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Lower, Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Sheet Steel
• Cone Size [mm]: 18
• replacement in pairs recommended:
• Required quantity: 1
• paired article number: 016 050 0011
• Name: Roolimine - K„„ndmik DB P. W124 LE DOLNY
• Manufacturer: MEY

• Fitting Position: Lower, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Sheet Steel
• Cone Size [mm]: 18
• replacement in pairs recommended:
• Required quantity: 1
• paired article number: 016 050 0010
• Name: Roolimine - K„„ndmik DB P. W124 PR DOLNY
• Manufacturer: MEY

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 124 84-93
(kvaliteediklass: PJ)"

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 124 84-93
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Name: Roolikomplekt,k„„ndmik
• Manufacturer: JPA

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Supplementary Article/Supplementary Info: with accessories
• Material: Sheet Steel
• paired article number: 10974 02
• Name: Roolimine - K„„ndmik DB P. W124 LE DOLNY
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 124029
• Axle alignment required after fitting:
• Weight [kg]: 5.5
• Colour: black
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Right, Lower Front Axle
• Material: Sheet Steel
• Article number of the recommended special tool: V99-1020
• paired article number: V30-9507
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Manufacturer: DELPHI
• Additional information: TC1600KIT DEL
• Lisainfo: TC1600KIT DEL