• Engine Code: M 116.965
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK
• Additional information: 5637 NGK
• Lisainfo: 5637 NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat

• Driven Units: Alternator
• for OE number: 0079977892
• Width [mm]: 10
• Length [mm]: 900
• Lisainfo: V-belt, 10x900 mm
• Additional information: V-belt, 10x900 mm

• Driven Units: Alternator
• Width [mm]: 10
• Length [mm]: 987
• Lisainfo: V-Belt
• Additional information: V-Belt

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• DIN/ISO: 7603
• Material: Copper
• Shape: A Shape
• Weight [kg]: 0.001
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Copper
• Inner Diameter [mm]: 12.5
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 17
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 505.550, 505.540
• Manufacturer: ELRING

• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Material: Copper
• Inner Diameter [mm]: 14
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.72
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Weight [kg]: 0.03
• Manufacturer: FEBI
• Lisainfo: 13447 FEBI
• Additional information: 13447 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.7
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Weight [kg]: 0.03
• Manufacturer: FEBI
• Lisainfo: 13453 FEBI
• Additional information: 13453 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.3
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Manufacturer: SWAG

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Weight [kg]: 0.04
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 46759688
• Manufacturer: KAMOKA

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 25918110
• Manufacturer: KAMOKA

• Engine Code: M 116.965
• Required quantity: 8
• for OE number: 09482-00392
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
RENAULT 9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
RENAULT 9
(kvaliteediklass: Q)"

• Engine Code: M 116.965
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat, Fixed SAE connector

• Engine Code: M 116.965
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK - NTK
• Additional information: BP6ES NGK
• Lisainfo: BP6ES NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat

• Driven Units: Air compressor
• Width [mm]: 10
• Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: V-Belt
• Additional information: V-Belt

• Required quantity: 8
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Manufacturer: BOSCH
• Name: BS 0242229656

• Transmission ID: 722.4
• Seal Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.098
• Manufacturer: FEBI

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.3
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Manufacturer: FEBI

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.4
• Seal Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.098
• Manufacturer: SWAG

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Alternator
• Special Purpose Vehicle: not for armoured vehicles
• Length [mm]: 1,000
• Width [mm]: 10
• Belts: Open-sided, Toothed
• Manufacturer: BOSCH
• Name: BS 1987947613

• Driven Units: Air conditioning compressor
• Width [mm]: 13
• Length [mm]: 925
• Manufacturer: JP GROUP
• Lisainfo: V-Belt
• Additional information: V-Belt

• Driven Units: Power steering pump
• Required quantity: 2
• Length [mm]: 1,100
• Width [mm]: 10
• Belts: Open-sided, Toothed
• Manufacturer: BOSCH
• Name: BS 1987947642

• Engine Code: M 116.965
• Required quantity: 8
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN W20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Transmission Code: 722.324/355, W 4 A 040, 722.3.., 722.5..
• Manufacturer: ELRING

Transmission Type: 4-Speed Automatic Transmission, 5-Speed Automatic Transmission

• Fitting Position: both sides
• Length [inch]: 22
• Length [mm]: 550
• Wiper blade type: Bracket wiper blade
• Fastening Type: Hook fixing
• Weight [kg]: 0.134
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Length [mm]: 550
• Supplementary Article/Info 2: with vehicle-specific adaptor
• Matching Adapter: V12
• Manufacturer: MAGNETI MARELLI

• Driven Units: Air conditioning compressor
• Length [mm]: 950
• Width [mm]: 13
• Belts: Open-sided, Toothed
• Manufacturer: BOSCH
• Name: BS 1987947615

• Fitting Position: both sides, Front
• Length [mm]: 550
• Length [inch]: 22
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 9XW178878221
• Manufacturer: HELLA

• Driven Units: Power steering pump
• Length [mm]: 1,100
• Width [mm]: 10
• Lisainfo: V-belt, 10x1100 mm
• Additional information: V-belt, 10x1100 mm

• Driven Units: Alternator
• for OE number: 0079977892
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 900
• Outer Length [mm]: 910
• Manufacturer: GATES PASKI PRZEWODY

• Required quantity: 8
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Height [mm]: 121
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 23

• Fitting Position: Front
• Length [mm]: 525
• Technical Information Number: Flat
• Manufacturer: JAPKO

• Driven Units: Air compressor
• Weight [kg]: 0.061
• Length [mm]: 750
• Manufacturer: CONTITECH

• Driven Units: Air pump
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 750
• Outer Length [mm]: 760
• Manufacturer: GATES

• Filter type: Filter Insert
• Height [mm]: 122
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Driven Units: Power steering pump
• Required quantity: 2
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 1,100
• Outer Length [mm]: 1,110
• Manufacturer: GATES

• Driven Units: Alternator
• for OE number: 0069972692
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 988
• Outer Length [mm]: 998
• Manufacturer: GATES

• Driven Units: Air conditioning compressor
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 950
• Outer Length [mm]: 965
• Manufacturer: GATES PASKI PRZEWODY

• Driven Units: Alternator
• Weight [kg]: 0.077
• Length [mm]: 990
• Manufacturer: CONTITECH

• Vehicle Equipment: for vehicles with power steering
• Material: Paper
• Manufacturer: METZGER

• Transmission Code: 722.3+722.4
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Filter type: Filter Insert
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic filter, gearbox
• Additional information: Hydraulic filter, gearbox

• Driven Units: Power steering pump
• 2 Belts:
• Weight [kg]: 0.085
• Length [mm]: 1,110
• Manufacturer: CONTITECH

• Filter type: Filter Insert
• Height [mm]: 120.6
• Outer Diameter [mm]: 82.6
• Inner Diameter 1 [mm]: 23.5
• Inner Diameter 2 [mm]: 12
• Manufacturer: BOSCH

• Driven Units: Air conditioning compressor
• Weight [kg]: 0.106
• Length [mm]: 920
• Manufacturer: CONTITECH

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• for OE number: 8250A203
• Length [mm]: 550
• Length [inch]: 22
• Weight [g]: 165
• Wiper blade type: Bracket wiper blade
• Gross Weight [g]: 208
• Manufacturer: DENSO
• Additional information: DM-555 DEN
• Lisainfo: DM-555 DEN

• Outer Diameter [mm]: 80.6
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• Weight [kg]: 0.118
• Seal Material: Paper
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Passenger Side
• Matching Adapter: A
• Fastening Type: Hook fixing
• Length [mm]: 550
• Length [inch]: 22
• Wiper blade type: Flat wiper blade
• Name: TR FL550
• Manufacturer: TRICO

• Fitting Position: Passenger Side
• Length [mm]: 550
• Length [inch]: 22
• Fastening Type: Hook fixing
• Weight [g]: 112
• Name: TR NF550
• Manufacturer: TRICO

• Filter type: Screen Filter
• Length [mm]: 189
• Width [mm]: 175
• Thickness [mm]: 20
• Material: Steel
• Surface: Blank
• Weight [kg]: 0.25
• Transmission Type: for automatic transmission
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Diameter [mm]: 84
• Height [mm]: 121
• Inner Diameter 2 [mm]: 11
• Inner Diameter 3 [mm]: 23.4
• Diameter 4 [mm]: 23.4
• Packaging height [cm]: 12.9
• Net Weight [g]: 160
• Packaging length [cm]: 8.6
• Packaging width [cm]: 8.6
• Manufacturer: KNECHT
• Name: KN OX32D

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 121
• Inner Diameter [mm]: 11.5
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER
• Lisainfo: H 929 X MAN
• Additional information: H 929 X MAN

• Fitting Position: both sides
• Fastening Type: Hook fixing
• Length [inch]: 22
• Length [mm]: 550
• Wiper blade type: Flat wiper blade
• Weight [kg]: 0.111
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• for OE number: 8250A094
• Length [mm]: 550
• Length [inch]: 22
• Weight [g]: 155
• Wiper blade type: Bracket wiper blade
• Gross Weight [g]: 208
• Manufacturer: DENSO

• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper

• Colour: light beige
• Capacity [litre]: 1
• Specification: MB 343.0, Hydraulic fluid ZH-M
• Weight [kg]: 0.93
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: light
• Capacity [litre]: 1
• Specification: MB 343.0, Hydraulic fluid ZH-M
• Weight [kg]: 0.93
• Observe service information:
• Name: FE 02615
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Length [mm]: 550
• Length [inch]: 22
• Matching Adapter: U
• Technical Information: Product may differ from images
• Manufacturer: VALEO
• Name: VA 574118

• Filter type: Filter Insert
• Diameter [mm]: 80.6
• Seal Diameter [mm]: 35
• Height 1 [mm]: 26
• Packaging width [cm]: 2.8
• Packaging length [cm]: 8.2
• Packaging height [cm]: 8.2
• Net Weight [g]: 87
• Manufacturer: KNECHT
• Name: KN HX44

• Length [mm]: 395
• Width [mm]: 293
• Height [mm]: 80
• Filter type: Air Recirculation Filter
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: M 116.965
• Required quantity: 8
• Fuel Type: CNG/LPG
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN IW20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: both sides
• Length [inch]: 22
• Length [mm]: 550
• Wiper blade type: Hybrid Wiper Blade
• Fastening Type: Hook fixing
• Weight [kg]: 0.111
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 293
• Outer Diameter [mm]: 394.5
• Height [mm]: 80
• Weight [kg]: 0.513
• Filter type: Filter Insert
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Length [mm]: 550
• Supplementary Article/Info 2: with vehicle-specific adaptor
• Manufacturer: MAGNETI MARELLI

• Transmission Code: W 4 A 040, 722.3.., 722.4..
• Filter type: Suction Filter
• Transmission Type: 4-Speed Automatic Transmission
• not for transmission code: 722.323/350/353, 722.362/364/365/370
• Manufacturer: ELRING

• Fitting Position: Driver side, Front
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Matching Adapter: A
• Wiper blade type: Flat wiper blade
• Styling: with spoiler
• Quantity Unit: Piece
• Length [mm]: 530
• Length [inch]: 21
• Similar to picture:
• Manufacturer: CONTINENTAL WYCIERACZKI

• Engine Code: M 116.965
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Transmission Code: 722.300-722.371
• Filter type: Suction Filter
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: 4-Speed Automatic Transmission
• Transmission ID: 722.4
• Filter type: Screen Filter
• Seal Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.425
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: SWAG
• Name: SW 99 90 8900

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Code: 722.400-722.440
• Filter type: Suction Filter
• Length [mm]: 184
• Inner Diameter [mm]: 26
• Width [mm]: 164
• Height [mm]: 21
• Bypass Valve Opening Pressure [bar]: 0.2
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: 500 + 560 (722.323/3
• Filter type: Suction Filter
• Length [mm]: 184
• Inner Diameter [mm]: 26
• Width [mm]: 164
• Height [mm]: 20
• Bypass Valve Opening Pressure [bar]: 0.2
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: 722.300-722.371
• Filter type: Filter Insert
• Transmission Type: for 4-speed automatic transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Code: 722,3
• Transmission Type: 4-Speed Automatic Transmission
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• Length [mm]: 183.7
• Width [mm]: 163.5
• Supplementary Article/Info 2: with oil sump gasket
• See accessories list for additionally required parts:
• Weight [kg]: 0.522
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Additional information: V30-0493
• Lisainfo: V30-0493

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Height [mm]: 80
• Inner Diameter [mm]: 293
• Outer Diameter [mm]: 394
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: M 116.965
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode

• Transmission Code: 722.300-722.371
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Fitting Position: Front
• Wiper blade type: Bracket wiper blade
• Quantity: 2
• Length 1 [mm]: 530
• Length 2 [mm]: 530
• Length 1 [Inch]: 21
• Length 2 [Inch]: 21
• Matching Adapter: U + U
• General Information: Product may differ from images
• Name: VA 116222
• Manufacturer: SWF

• Transmission Code: 722.400-722.440
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Supplementary Article/Supplementary Info: with seal
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Transmission number from: 722.300
• Transmission number to: 722.395
• Filter type: Filter Insert
• Length [mm]: 186.5
• Width [mm]: 171
• Height [mm]: 23.6
• Inner Diameter 2 [mm]: 33
• Transmission Code: 722.3
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 60,000
• Packaging width [cm]: 2.9
• Packaging length [cm]: 26
• Packaging height [cm]: 38
• Net Weight [g]: 428
• Manufacturer: FILTRY KNECHT / MAHLE

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission

• Transmission Code: 500 + 560 (722.323/3, 722,5
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Weight [kg]: 0.597
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 560
• Length 2 [mm]: 560
• Wiper blade type: Bracket wiper blade without spoiler
• Manufacturer: BOSCH