• Engine Code: M 104.992
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Boot for shock absorber, front
• Additional information: Boot for shock absorber, front

• Fitting Position: Front Axle
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FAG

• Fitting Position: Front Axle
• Height [mm]: 150
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. W124/201 LE/PR

• Fitting Position: Front Axle
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: MAX

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
MERCEDES 124 85-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• not for trim level: Esprit;Sportline
• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: MAX

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Monotube
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Length [mm]: 506
• Length 2 [mm]: 397
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles with standard suspension
• not for trim level: Esprit, Sportline
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Piston Rod Diameter [mm]: 12.5
• Suspension Strut Outer Diameter [mm]: 39
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-1263
• Name: AMORT
• Manufacturer: MAX

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• not for trim level: Esprit, Sportline
• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Weight [kg]: 2.39
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1995
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0210
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Construction Year to: 12.1995
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0210
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Piston Rod Diameter [mm]: 12.5
• Suspension Strut Outer Diameter [mm]: 40
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with sports suspension, for vehicles with bad road version

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• Fitting Position: Front Axle
• Length [mm]: 607
• Length 2 [mm]: 425
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 54
• Diameter 2 [mm]: 32
• Spring Type: for vehicles with coil spring suspension
• Name: MM 2709G
• Manufacturer: MAGNETI MARELLI

• Quantity per axle: 1
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Observe technical data:
• Shock Absorber Mounting Type: Top pin
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• not for trim level: Esprit, Sportline
• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ETOV36X116A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ETOV36X108A2
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 014 032 0001/HD, 014 032 0092
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Construction Year to: 07.1996
• Fitting Position: Front Axle
• only in connection with: AK217
• Suspension: for vehicles with standard suspension
• not for trim level: Sportline
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.2
• Bore Ø [mm]: 32
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: AK217, MK063, PK034
• Packaging length [cm]: 67.4
• Packaging width [cm]: 12.5
• Packaging height [cm]: 12.7
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Construction Year to: 12.1995
• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

• not for trim level: Esprit, Sportline
• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Parameter: SFE36/22X168A
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with bad road version
• Parameter: SFE36/22X168A
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
MERCEDES W201 (190)
(kvaliteediklass: Q)"

• Vehicle type: Heavy Duty
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
MERCEDES W124
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES W124
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Additional information: "Tootja: BILSTEIN
MERC C124
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERC C124
(kvaliteediklass: Q)"

• Vehicle type: Sportline
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Name: AMORT
• Manufacturer: BIL

Lisainfo: "Tootja: BILSTEIN
MERCEDES W/C124
(kvaliteediklass: Q)"

• Vehicle type: Sportline
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
MERCEDES W/C124
(kvaliteediklass: Q)"

• Vehicle type: Heavy Duty
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
MERCEDES W124 (WZM.)
(kvaliteediklass: Q)"

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
MERCEDES W201 -93
(kvaliteediklass: Q)"

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Sport shock absorber
• Quality class: Q

Additional information: "Tootja: BILSTEIN
MERCEDES 190 (W201)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES 190 (W201)
(kvaliteediklass: Q)"