Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Pikkus (mm): 95
- Kulumisnäidikute arv [ühe telje kohta]: 4
-
Netokaal [kg]: 0,
01 -
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: NK
- Fitting Position: Front Axle both sides
- Pikkus (mm): 94
- Lisainfo: ESISILD JA TAGASILD
- Additional information: ESISILD JA TAGASILD
- Pikkus (mm): 52
-
Väliskeere [mm]: M14 x 1,
5 - Võtmekaugus: 19
- Ühenduste arv: 1
- Lülituspunkt [°C]: 120
- Värvimarkeering: must
- Manufacturer: JP GROUP
- Lisainfo: Temperature sensor for cooling system
- Additional information: Temperature sensor for cooling system
- Pikkus (mm): 52
- Korpusevärv: valge
- Võtmekaugus: 19
- Manufacturer: KAMOKA
- Pikkus (mm): 52
- Korpusevärv: must
- Võtmekaugus: 19
- Manufacturer: KAMOKA
- Pikkus (mm): 52
- Võtmekaugus: 19
- Värvimarkeering: must
- Pistikkontaktide arv: 1
-
Keermemõõt: M14x1,
5 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- OE-numbri jaoks: 005 545 0324
- Manufacturer: TRUCKTEC
-
Väliskeerme mõõde: M14 x 1,
5 - Võtmekaugus: 19
- Ühenduste arv: 1
-
Kaal (kg): 0,
025 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Anduritüüp: NTC-
andur - Montaaživiis: kruvitud
- Pistikkontaktide arv: 1
- Võtmekaugus: 19
- Keermemõõt: M14x1.5
- OE-numbri jaoks: 2D0919501C
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Pikkus (mm): 56,
6 -
Kaal (kg): 0,
036 -
Keermemõõt: M14x1,
5 - Lülituspunkt [°C]: 120
- Võtmekaugus: 19
- Piirangutega toode/piirangu info: koos tihendiga
- Värvimarkeering: must
- Pistikkontaktide arv: 1
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pistikkontaktide arv: 1
- Värv: must
-
Keermemõõt: M14x1,
5 mm -
Anduritüüp: NTC-
andur - Võtmekaugus: 19
-
OE-numbri jaoks: 005 542 10 17,
6615423017, 2D0 919 501 C - Manufacturer: MEAT&DORIA
- Pikkus (mm): 52
-
Väliskeerme mõõde: M14 x 1,
5 - Võtmekaugus: 19
- Ühenduste arv: 1
- Värvimarkeering: must
- Lülituspunkt [°C]: 120
-
Kaal (kg): 0,
034 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- tootekoodile: 005 542 10 17
- Laius 1 (mm): 33
- Kõrgus 1 (mm): 30
- Pikkus 1 [mm]: 58
- Kaal (g): 38
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Pikkus (mm): 52
-
Väliskeerme mõõde: M14 x 1,
5 - Võtmekaugus: 19
- Ühenduste arv: 1
- Värvimarkeering: must
- Lülituspunkt [°C]: 120
-
Kaal (kg): 0,
034 - Name: SW 99 90 8668
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Keermemõõt: M14 x 1,
5 - Võtmekaugus: 19
- Manufacturer: ERA
- Engine Code: OM 601.940
- Fitting Position: Water Pump
-
Keermemõõt: M14x1,
5 - Võtmekaugus: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: OM 601.940
- Fitting Position: Cylinder Head
-
Keermemõõt: M14x1,
5 - Võtmekaugus: 19
- Manufacturer: FACET
- Engine Code: OM 601.940
- Fitting Position: Cylinder Head
-
Keermemõõt: M14x1,
5 - Võtmekaugus: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Construction Year from: 07.1989
- Keermemõõt: M14x1.5
- Ühenduste arv: 1
- Pistikute teostus: Ümarpistik
- Manufacturer: VERNET
-
Keermemõõt: M 14x1,
5 - Pistikute teostus: Ümarpistik
- Manufacturer: FAE
-
Anduritüüp: NTC-
andur -
Keermemõõt: M14x1,
5 - Võtmekaugus: 19
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Värv: must
- Pistikkontaktide arv: 1
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Montaaživiis: kruvitud
- Pinge [V]: 12
-
Takistus [oom]: 628,
70 - Piirangutega toode/piirangu info: koos tihendiga
- temperatuurivahemik alates [°C]: 25
- Temperatuurivahemik kuni [°C]: 80
-
Keermemõõt: M14x1,
5 -
Anduritüüp: NTC-
andur - Pistikkontaktide arv: 1
- Korpusevärv: must
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6PT009107251
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
-
Keermemõõt: M12 x 1,
5 - Lülituspunkt alates [bar]: 0
- Lülituspunkt kuni [bar]: 3
-
Kaal (kg): 0,
103 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 1
- Fitting Depth [mm]: 12
- Plug Type: Round Plug
- Number of mounting bores: 2
-
Fabrication Number: EPO-
ME- 000 - Manufacturer: NTY
-
Name: NTY EPO-
ME- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pistikkontaktide arv: 1
- Pistikute teostus: Ümarpistik
-
Manufacturer: ABAKUS DEPO/
LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Pinge [V]: 12
- Pistikkontaktide arv: 1
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV396
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 1
-
Name: ANDUR,
MOOTORIOLITASE - Manufacturer: MAX
- Pistikkontaktide arv: 1
- Kinnitusaukude hulk: 2
- Installatsiooni sügavus (mm): 12
- OE-numbri jaoks: A 124 542 00 17
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
- Piirangutega toode/piirangu info: koos tihendiga
-
Kaal (kg): 0,
11 - Installatsiooni pool: Õlivann
- Manufacturer: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks