• Number of pins: 2
• Socket colour: blue
• Thread Size: M14x1,5 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19
• Vehicle Equipment: for vehicles with air conditioning
• for OE number: 008 542 45 17
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 14x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 005 153 23 28
• Manufacturer: MEAT&DORIA

• for OE number: 010 542 5717
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Engine Code: M 111.945
• Height [mm]: 50.6
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Fabrication Number: ESS-ME-000
• Manufacturer: NTY

• Engine Code: M 111.945
• Housing Colour: black
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: EP 1.830.350
• Manufacturer: EPS

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: M 111.941
• Number of pins: 2
• Housing Colour: black
• Thread Size: M 14x1,5
• Manufacturer: FAE

• Engine Code: M 111.945
• Manufacturer: FAE

• Fabrication Number: ECP-ME-006
• Number of pins: 3

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Manufacturer: BOSCH

• Construction Year from: 06.1998
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 5946 23, 55353316, 003 153 89 28, 6235703
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M14x1,5
• Colour: blue
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Length [mm]: 45
• Thickness [mm]: 18
• Inner Diameter [mm]: 8
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Number of pins: 3
• Name: DE SS11195
• Manufacturer: DELPHI

• Engine Code: M 111.941
• Vehicle Equipment: for vehicles with immobilizer
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M14x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 111.945
• Housing Colour: black
• Manufacturer: EPS

• Fabrication Number: EPP-ME-001
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 3
• Fitting Depth [mm]: 36
• Weight [kg]: 0.031
• Manufacturer: ERA

• Fabrication Number: EPP-ME-002
• Manufacturer: NTY

• Number of pins: 5
• Component Number: 120-08-073
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• for OE number: 004 153 0028
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Housing Type: without housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: EPP-BM-013
• Manufacturer: NTY

• Transmission Type: Manual Transmission
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 50
• Width [mm]: 60
• Thickness [mm]: 40
• Number of connectors: 3
• Weight [kg]: 0.041
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 11.1999
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10761-12B1

• Construction Year from: 06.1998
• Engine Code: 111.945
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121071

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 50
• Width [mm]: 60
• Thickness [mm]: 40
• Number of connectors: 3
• Weight [kg]: 0.041
• Supplementary Article/Info 2: with seal ring
• Name: SW 10 93 3737
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Catalytic Converter Type: with two-way catalytic converter
• not for Component Number: 807
• Number of pins: 5
• Housing Type: with housing

• Construction Year from: 11.1999
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 36
• for article number: 87564
• Manufacturer: MEAT&DORIA

• for OE number: 162 094 31 48
• Manufacturer: KAMOKA

• for OE number: 525428
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Number of pins: 2
• Manufacturer: DELPHI

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• for OE number: 000 540 9217
• Cable Length [mm]: 1,020
• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: M 111.945
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: M 111.945
• Number of pins: 3
• Length [mm]: 24
• Sensor Type: Hall Sensor
• Manufacturer: METZGER

• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Engine Code: M 111.945
• Number of pins: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Engine Number to: 007268
• Cable Length [mm]: 1
• Manufacturer: DELPHI
• Name: DE ES20274-12B1

• Construction Year to: 06.2000
• Engine Code: M 111.945
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Engine Code: M 111.945
• Catalytic Converter Type: with three-way catalytic converter
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV502

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission, Manual Transmission
• Engine Number to: ..003752, ..001912
• Block Separation:
• Engine Number from: ..003753, ..001913
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,180
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV628

• Construction Year to: 06.2000
• Transmission Type: Manual Transmission
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: M 111.945
• Engine Number to: 001913
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV140

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.25
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: M 111.945
• Construction Year from: 06.1998
• Engine Number from: 001912, 003753
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 1,165
• Number of circuits: 4
• Manufacturer: VDO

• Engine Code: M 111.945
• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Catalytic Converter Type: with three-way catalytic converter
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Weight [kg]: 0.2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10282-12B1

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission, Manual Transmission
• Engine Number from: ..003753, ..001913
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,150
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: M 111.945
• Catalytic Converter Type: with three-way catalytic converter
• Weight [kg]: 0.255
• Number of connectors: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 111.945
• Catalytic Converter Type: with three-way catalytic converter
• Operating Mode: Electric
• Voltage [V]: 12
• Housing Type: without housing
• Manufacturer: PIERBURG

General Information: Software-Update at replacement in 0 928 400 314 (BMW)

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Catalytic Converter Type: with two-way catalytic converter
• not for Component Number: 807
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Construction Year from: 06.1998
• Construction Year to: 06.2000
• Catalytic Converter Type: with three-way catalytic converter
• Component Number: 807
• Engine Code: M 111.945
• for OE number: A0000940948
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HITACHI

• Engine Code: M 111.945
• Construction Year to: 06.2000
• Catalytic Converter Type: with three-way catalytic converter
• Component Number: 807
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH
• Name: BS 0280217114

• Engine Code: M 111.945
• Housing Type: with housing
• Length [mm]: 130
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: EPS