• Engine Code: M 276.853
• for article number: 7.8776, 7.8875
• Manufacturer: FACET

• for OE number: 000 905 06 00
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: M 276.853
• for article number: 1.880.776, 1.880.875
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of pins: 3
• Fabrication Number: ECM-ME-002
• Manufacturer: NTY

• Number of connectors: 3
• for OE number: 009 153 52 28
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Name: Andur,kompressorirohk
• Manufacturer: BOS

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Fitting Position: Exhaust Gas Recirculation
• Number of pins: 3
• Spanner Size: 24
• Name: CZUJNIK CI—N. SPALIN DB C 250 CDI 08-
• Manufacturer: MEY

• for OE number: 009 153 52 28
• Number of connectors: 3
• Fabrication Number: ECS-ME-003
• Manufacturer: NTY

• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 10
• Spanner Size: 24
• Housing Colour: black
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Suction pipe connector diameter [mm]: 8.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV778

• Exhaust System: for two-part exhaust system
• Connector Shape: oval
• Number of pins: 3
• Pressure [Pa] from: 50,000
• Pressure [Pa] to: 700,000
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: VDO

• Number of pins: 3
• Pressure [Pa] from: 50,000
• Pressure [Pa] to: 700,000
• Manufacturer: FAE ELEKTRYKA

• Number of connectors: 3
• Manufacturer: FAST

• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: Right Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Quantity: 1
• for special equipment code: 920
• Cable Length [mm]: 410
• Manufacturer: DELPHI
• Name: DE ES21236-12B1

• Number of pins: 3
• Pressure [Pa] to: 600,000
• Socket colour: black
• Manufacturer: FAE ELEKTRYKA

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Engine Code: M 276.853
• Fitting Position: after EGR cooler
• Thread Size: M12x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: M 276.853
• for special equipment code: 920
• Fitting Position: Right Front, after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.175
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Block Separation:
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Block Separation:
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Number of pins: 3
• Connector Shape: oval
• for OE number: 0091535228
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Opening pressure [kPa]: 49
• Name: DE DPS00034-12B1
• Manufacturer: DELPHI

• Number of connectors: 3
• Weight [kg]: 0.034
• for OE number: 009 153 52 28
• Name: Andur, heitgaasisurve
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 500
• Number of pins: 6
• Manufacturer: FAE

• Fitting Position: Right, before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Number of pins: 6
• Overall Length [mm]: 400
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 9
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Fitting Position: EGR Valve
• Version: OE
• Manufacturer: METZGER

• Number of pins: 4
• Connector Shape: oval
• Socket colour: black
• Fuel Type: Petrol
• Supplementary Article/Info 2: High Pressure Side
• for OE number: 2781530728
• Manufacturer: MEAT&DORIA

• Engine Code: M 276.853
• Fitting Position: Left Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.468
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: M 276.853
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: M 276.853
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: M 276.853
• for special equipment code: 920
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Component Number: 920
• Number of circuits: 5
• Overall Length [mm]: 490
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter, Right
• not for special equipment code: 920
• Oxygen Sensor: Broadband Oxygen Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: M 276.853
• for special equipment code: 920
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Construction Year from: 01.2017
• Engine Code: 276.853
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368397
• Manufacturer: VALEO

Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Component Number: 920
• Number of circuits: 5
• Overall Length [mm]: 520
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Left
• Component Number: 920
• Number of circuits: 5
• Overall Length [mm]: 753
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• not for Component Number: 920
• Number of circuits: 5
• Overall Length [mm]: 350
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter, Left
• not for special equipment code: 920
• Oxygen Sensor: Broadband Oxygen Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• not for Component Number: 920
• Number of circuits: 5
• Overall Length [mm]: 400
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 01.2017
• Engine Code: 276.853
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368396
• Manufacturer: VALEO

Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Construction Year from: 01.2017
• Engine Code: 276.853
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO
• Name: VA 368402

Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Construction Year from: 01.2017
• Engine Code: 276.853
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368227
• Manufacturer: VALEO

Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Construction Year from: 01.2017
• Engine Code: 276.853
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Engine Code: M 276.853
• for OE number: A 009 542 59 18, A 009 542 60 18, A 009 542 63 18
• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 500
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE