• Length [mm]: 95
• Fabrication Number: HCZ-ME-001
• Manufacturer: NTY

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Brake Type: Disc Brake
• Length [mm]: 97
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

Manufacturer: FAST

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: OM 656.929
• Required quantity: 1
• Manufacturer: FACET

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Thread Size: 15 mm
• Manufacturer: VERNET

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV682

• Engine Code: OM 656.929
• for article number: 7.8776, 7.8875
• Manufacturer: FACET

• Engine Code: OM 656.929
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• Engine Code: OM 656.929
• Thread Size: M12x1,25
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: OM 656.929
• Thread Size: M12x1,25
• Spanner Size: 19
• Name: EP 1.830.400
• Manufacturer: EPS

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Name: HE 6PT358058191
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Housing Colour: black
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: ERA

• Quantity: 1
• Number of pins: 3
• Name: DE SS12349-12B1
• Manufacturer: DELPHI

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Required quantity: 1
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP107
• Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV015
• Manufacturer: ESEN SKV

Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear

• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable, with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: OM 656.929, 656929
• Required quantity: 1
• Fitting Position: after EGR cooler
• Thread Size: M12x1
• Spanner Size: 16
• Manufacturer: FACET

• Fitting Position: Front, Rear
• Manufacturer: FAST

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Fabrication Number: ECM-ME-002
• Manufacturer: NTY

• Quantity: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV096

• Fitting Position: Rear Axle
• Required quantity: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: A0005404716
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity: 1
• Number of pins: 3
• Name: DE PS20145-12B1
• Manufacturer: DELPHI

• Frequency Range [MHz]: 433
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 09.2020
• Manufacturer: BOSCH
• Name: BS 0261230506

• Weight [kg]: 0.05
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: OM 656.929
• Manufacturer: FACET

• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV876

• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Power [W]: 0.035
• Manufacturer: METZGER
• Lisainfo: 0905460 METZGER
• Additional information: 0905460 METZGER

• Construction Year to: 09.2020
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00466

• Construction Year to: 09.2020
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00468

• Construction Year to: 09.2020
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Construction Year to: 09.2020
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00469

• Engine Code: OM 656.929
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Construction Year from: 01.2021
• Exhaust System: before soot particulate filter
• Engine Code: OM 656.929
• Number of pins: 3
• Opening pressure [kPa]: 25
• Name: DE DPS00073-12B1
• Manufacturer: DELPHI

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• for model year: 2019, 2020, 2021
• for special equipment code: 809, 800, 801, 235
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 66
• Cable Length [mm]: 999
• Number of pins: 2
• Thread Size: M12X1
• Manufacturer: METZGER

• Production date from: 22.12.2020
• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before soot particulate filter
• Manufacturer: NRF

• Construction Year to: 09.2020
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Fitting Position: Front, outer
• for special equipment code: 235+800, 235+801, 235+809
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: angled
• Version: IAM
• Manufacturer: METZGER

• Exhaust System: for two-part exhaust system
• Manufacturer: NRF KLIMATYZACJA

• Fitting Position: after catalytic converter
• Cable Length [mm]: 570
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.1
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV463

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Exhaust System: before exhaust gas recirculation
• Manufacturer: NRF

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Required quantity: 4
• Fitting Position: inner, Centre left, Centre right, Front
• for model year: 2019, 2020, 2021
• for special equipment code: 809, 800, 801, 235
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ECS-ME-014
• Number of pins: 3

• Fabrication Number: EGT-ME-039
• Cable Length [mm]: 400
• Manufacturer: NTY

• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV464

• Construction Year to: 09.2020
• Fitting Position: Front Axle
• Manufacturer: BOSCH HAMULCE

• Number of connectors: 3
• Fabrication Number: ECS-ME-008
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: EPO-ME-007
• Manufacturer: NTY

• Fitting Position: Front Axle
• Required quantity: 2
• Supplementary Article/Info 2: without cable
• Length [mm]: 69.6
• MAPP code available:
• Manufacturer: ATE

• Construction Year from: 01.2018
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Length [mm]: 56
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fabrication Number: ECS-ME-010
• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Number of connectors: 2
• Manufacturer: NTY

• Production date from: 22.12.2020
• Fitting Position: Soot Particulate Filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• for OE number: A0009055307
• Manufacturer: METZGER

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV776

Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Required quantity: 2
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

• not for special equipment code: 929K
• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV770

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Quantity: 1
• Name: HE 6PR013680171
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for special equipment code: M654, M656
• Number of pins: 3
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: without connection line
• Fitting Position: Soot Particulate Filter
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: Fuel Line
• Supplementary Article/Info 2: Low Pressure Side
• for OE number: A0009050603
• Manufacturer: MEAT&DORIA

• Required quantity: 2, 4, 8
• for model year: 2019, 2020, 2021
• for special equipment code: 235, 809/800/801
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890019
• Manufacturer: VALEO
• Additional information: 890019 VALEO
• Lisainfo: 890019 VALEO

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Fitting Position: outer, inner, both sides, Centre left, Centre right, Front, Rear

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• for model year: 2019, 2020, 2021
• for special equipment code: 235, 809/800/801
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890010
• Manufacturer: VALEO

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Fitting Position: outer, both sides, Front, Rear, lateral installation

• Fitting Position: after catalytic converter
• Shape: Bent
• Connector Shape: oval
• Cable Length [mm]: 530
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Engine Code: OM 656.929
• Sensor Length [mm]: 133.6
• Manufacturer: FACET

• Engine Code: OM 656.929
• Sensor Length [mm]: 133.6
• Name: EP 1.800.245
• Manufacturer: EPS