• Filter type: Filter Insert
• Transmission Code: 5G TRONIC
• Transmission Type: 5-Speed Automatic Transmission
• Width [mm]: 112
• Height [mm]: 46
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: Housing with black interior
• Transmission Type: for automatic transmission
• Fitting Position: transmission sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Code: 722.3+722.4
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Filter type: Filter Insert
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic filter, gearbox
• Additional information: Hydraulic filter, gearbox

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.6
• Transmission ID: W5A/580
• Required quantity: 1
• Fitting Position: Lower, transmission sided
• Alternative Repair Kit: 8020031
• Article number of recommended accessories: 0899041
• Manufacturer: METZGER

• Transmission Code: 722.600 / 722.699
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Transmission Code: 722.600 - 722.699
• Filter type: Suction Filter
• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 186.9
• Width [mm]: 112
• Height [mm]: 50.4
• Inner Diameter 2 [mm]: 29
• Transmission Code: 722.6, W5A 330, W5A 380, W5A 580, W5A 900
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 50,000
• Packaging length [cm]: 17.9
• Net Weight [g]: 230
• Packaging height [cm]: 30.4
• Packaging width [cm]: 5.8
• Name: KN HX81D
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission

• Filter type: Filter Insert
• Transmission Code: 722.600-699
• Transmission Type: 5-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Suction Filter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV064
• Manufacturer: ESEN SKV

• Transmission Code: 722.600 / 722.699
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: Automatic Transmission
• Transmission Code: 722.600-722.699
• Filter type: Filter Insert
• Length [mm]: 187
• Width [mm]: 125
• Height [mm]: 51
• Manufacturer: HENGST FILTER

• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• SVHC: No SVHC present!
• Manufacturer: METALCAUCHO

• Filter type: Filter Insert
• Width [mm]: 112
• Height [mm]: 50.4
• Inner Diameter 2 [mm]: 29
• Transmission Code: 722.6, W5A 330, W5A 380, W5A 580, W5A 900
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 50,000
• Packaging width [cm]: 5.8
• Packaging length [cm]: 17.9
• Net Weight [g]: 230
• Packaging height [cm]: 30.4
• Manufacturer: MAHLE KNECHT
• Lisainfo: HX 81D MAH
• Additional information: HX 81D MAH

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission

• Transmission Type: Automatic Transmission
• Transmission Code: 722.600 / 722.699, 722,6
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission number from: 722.300
• Vehicle Equipment: for vehicles with automatic transmission
• Transmission number to: 722.371
• Filter type: Filter Insert
• Length [mm]: 189
• Width [mm]: 174
• Height [mm]: 24
• Manufacturer: HENGST FILTER

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.600 - 699
• Supplementary Article/Supplementary Info: with gasket/seal
• Material: Rubber
• Alternative Repair Kit: 8020031, 0899042
• Article number of recommended accessories: 8029032
• Manufacturer: METZGER

• Transmission Code: 722.600 - 722.699
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Width [mm]: 111
• Height [mm]: 18
• Outer Diameter [mm]: 28
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN
• Lisainfo: H 182 KIT MAN
• Additional information: H 182 KIT MAN

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.6
• Filter type: Filter Insert
• Height [mm]: 52
• Length [mm]: 188
• Width [mm]: 126
• Manufacturer: PURFLUX

• Transmission Code: 722.352/363
• Filter type: Suction Filter
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Width [mm]: 112
• Height [mm]: 50
• Height 1 [mm]: 18
• Inner Diameter [mm]: 29
• Transmission Type: Automatic Transmission
• Gasket Design: Soft Material Gasket
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: 722.400-722.440
• Filter type: Suction Filter
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Supplementary Article/Info 2: with oil sump gasket
• Bypass Valve Opening Pressure [bar]: 0.2
• Manufacturer: DENCKERMANN FILTRY

• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.600-699
• Supplementary Article/Info 2: with plug
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Code: 722.3+722.4
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission Code: 722.352/363, 722,3
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• Length [mm]: 183.7
• Width [mm]: 163.5
• Supplementary Article/Info 2: with oil sump gasket
• See accessories list for additionally required parts:
• Weight [kg]: 0.522
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Additional information: V30-0493
• Lisainfo: V30-0493

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.352/363
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission Code: 722.600 / 722.699
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Transmission Code: 722.600 / 722.699
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Code: 722.400-722.440
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission ID: 722.600-722.699
• Recommended change interval [km]: 50,000
• Recommended change interval [years]: 3
• Transmission Type: 5-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Transmission Code: 722,6
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with plug
• Weight [kg]: 0.473
• Manufacturer: VAICO
• Lisainfo: V30-7313 VAI
• Additional information: V30-7313 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.500-722.510
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 20
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission Code: 722.500-722.510
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 20
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission Code: W5A-580, W5A-330, 722,6
• Transmission Type: 5-Speed Automatic Transmission
• Production date from: 1996
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date from: 1996
• Transmission Code: W5A-580, W5A-330, 722,6
• Transmission Type: 5-Speed Automatic Transmission
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 140 270 0861
• Name: JUHTSEADE,AUTOM.KŽIGUKAST
• Manufacturer: TRU

• Transmission Code: 722.600 / 722.699, 5G-Tronic, NAG1, 722,6
• Plug Type: Round Plug
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: VEMO GERMANY

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission Supplementary Article/Info 2: with filter, with bolts/screws, with oil sump gasket General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Transmission Code: 722.600 / 722.699, 722,6xx
• Width [mm]: 241
• Height [mm]: 95
• Length [mm]: 226
• Plug Type: Round Plug
• Vehicle Equipment: for vehicles with automatic transmission
• Weight [kg]: 0.67
• Manufacturer: VEMO

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.600 / 722.699, 5G-Tronic, NAG1, 722,6
• Manufacturer Approval (licensed): 236.14
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: VEMO GERMANY

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission Supplementary Article/Info 2: with filter, with bolts/screws, with oil sump gasket General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.