Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- Height [mm]: 64
- Outer Diameter [mm]: 92
- Manufacturer: KAMOKA
- Additional information: F116501 KAMOKA
- Lisainfo: F116501 KAMOKA
- Height [mm]: 63
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 92
- Filter type: Filter Insert
- Manufacturer: KAVO PARTS
- Filter type: Filter Insert
- Height [mm]: 63
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 91
- Quality class: PJ
- Name: Oil filter
- Filter type: Filter Insert
- Diameter [mm]: 90
- Height [mm]: 63
- Inner Diameter [mm]: 20
- Manufacturer: DENCKERMANN FILTRY
- Height [mm]: 63.5
- Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 90
- Filter type: Filter Insert
- Name: CFD DFO0701
- Manufacturer: DACO
- Filter type: Filter Insert
- Height [mm]: 64
- Outer Diameter [mm]: 92
- Gasket inside diameter [mm]: 95.5
- Gasket outside diameter [mm]: 103.5
- Weight [kg]: 0.12
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUEPRINT
- Additional information: ADN12134
- Lisainfo: ADN12134
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Height [mm]: 64
- Outer Diameter [mm]: 92
- Gasket inside diameter [mm]: 95.5
- Gasket outside diameter [mm]: 103.5
- Weight [kg]: 0.12
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
- Additional information: 100487
- Lisainfo: 100487
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Height [mm]: 64
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 90
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Height [mm]: 63
- Height 1 [mm]: 53
- Outer Diameter [mm]: 91
- Inner Diameter 1 [mm]: 21
- Manufacturer: BOSCH
- Name: BS F026407231
- Filter type: Filter Insert
- Height [mm]: 64
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 92
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: FAST
- Height [mm]: 63
- Inner Diameter 1 [mm]: 20.5
- Outer Diameter [mm]: 91.5
- Weight [kg]: 0.08
- Filter type: Filter Insert
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filter type: Filter Insert
- Outer Diameter [mm]: 91
- Inner Diameter [mm]: 20.5
- Height [mm]: 63
- Manufacturer: HENGST FILTRY
- Height [mm]: 63
- Height 1 [mm]: 52
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 92
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packing Type: Box
- Filter type: Filter Insert
- Version: x1 O'ring included
- Packaging length [cm]: 9.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 8
- Name: CH COF100695E
- Manufacturer: CHAMPION
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Height [mm]: 64
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 92
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
- Filter type: Filter Insert
- Diameter [mm]: 91.5
- Height [mm]: 63
- Inner Diameter 2 [mm]: 21
-
Supplementary Article/Supplementary Info: with gasket/
seal - Net Weight [g]: 88
- Packaging height [cm]: 8.1
- Packaging length [cm]: 9.6
- Packaging width [cm]: 9.6
- Manufacturer: MAHLE KNECHT
- Filter type: Filter Insert
- Diameter [mm]: 91.5
- Height [mm]: 63
- Inner Diameter 2 [mm]: 21
-
Supplementary Article/Supplementary Info: with gasket/
seal - Packaging height [cm]: 8.1
- Net Weight [g]: 88
- Packaging length [cm]: 9.6
- Packaging width [cm]: 9.6
-
Manufacturer: FILTRY KNECHT /
MAHLE - Name: KN OX968D
- Filter type: Filter Insert
- Height [mm]: 63
- Outer Diameter [mm]: 91
- Inner Diameter [mm]: 18
- Name: Oil filter
- Quality class: Q
Lisainfo: "Tootja: COOPERSFIAAM FILTERS
(kvaliteediklass: PJ)"
Additional information: "Tootja: COOPERSFIAAM FILTERS
(kvaliteediklass: PJ)"
- Filter type: Filter Insert
- Height [mm]: 63
- Outer Diameter [mm]: 91
- Inner Diameter [mm]: 18
- Manufacturer: PURFLUX
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks