• Engine Code: 111948
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 0005406517
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 975
• Pistikkontaktide arv: 4
• Kaal (g): 124
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 154
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
SPRINTER 3-T PLATFOR
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPRINTER 3-T PLATFOR
(kvaliteediklass: Q)"

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: M 111.950
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Keermemõõt: M14 x 1,5
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Pistiku värv: must
• Anduritüüp: NTC-andur
• Installatsiooni sügavus (mm): 23
• OE-numbri jaoks: A 000 905 07 00
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0292
• Additional information: 21-0292

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Pistiku värv: must
• Keermemõõt: M 14x1,5
• Anduritüüp: NTC-andur
• Võtmekaugus: 19
• OE-numbri jaoks: 005 153 23 28
• Manufacturer: MEAT&DORIA

• Engine Code: M 111.948
• Fitting Depth [mm]: 24
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV682
• Manufacturer: ESEN SKV

Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Värv: must
• Anduritüüp: NTC-andur
• Pikkus (mm): 52
• OE-numbri jaoks: 651 153 00 28
• Manufacturer: MEAT&DORIA

• Engine Code: M 111.950
• Kõrgus (mm): 50,6
• Kaal (kg): 0,027
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Jämedus/Tugevus (mm): 52
• Välisläbimõõt [mm]: 10
• Ühenduste arv: 2
• Kaal (kg): 0,005
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: round
• Number of connectors: 2
• Manufacturer: ERA

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: M 111.950
• Jämedus/Tugevus (mm): 51
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,02
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kõrgus (mm): 18,2
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Kaal (kg): 0,021
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Required quantity: 1
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: M 111.950
• Manufacturer: FAE

• OE-numbri jaoks: 003 153 8628
• Manufacturer: TRUCKTEC

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Engine Code: M 111.948
• Pistikkontaktide arv: 4
• Korpusevärv: must
• Keermemõõt: M 14x1,5
• Anduritüüp: NTC-andur
• Manufacturer: FAE

• Engine Code: M 111.950
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Kaal (kg): 0,014
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 5946 23, 55353316, 003 153 89 28, 6235703
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. DB M111
• Manufacturer: BRM

• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita, koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Engine Code: M 111.950
• Engine Number to: 40 076613
• Pikkus (mm): 45
• Jämedus/Tugevus (mm): 18
• Siseläbimõõt [mm]: 8
• Ühenduste arv: 2
• Kaal (kg): 0,045
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 111.950
• Engine Number to: 40076613
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 4
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• without ECE/ABE approval:
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV607

• Engine Code: M 111.950
• Jämedus/Tugevus (mm): 34,3
• Välisläbimõõt [mm]: 7,5
• Ühenduste arv: 3
• Kaal (kg): 0,015
• OE-numbri jaoks: 005 153 72 28
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Name: DE SS11195
• Manufacturer: DELPHI

• Montaaživiis: kruvitud
• Pinge [V]: 12
• Keermemõõt: M14x1,5
• Võtmekaugus: 22
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: HE 6PT009309251
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: EPP-ME-001
• Manufacturer: NTY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Engine Code: M 111.950
• Jämedus/Tugevus (mm): 34,3
• Välisläbimõõt [mm]: 7,5
• Ühenduste arv: 3
• Kaal (kg): 0,015
• OE-numbri jaoks: 005 153 72 28
• Name: SW 10 93 8494
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24,5
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 5
• Component Number: 120-08-073
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• OE-numbri jaoks: 004 153 0028
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRU

• Number of pins: 5
• Recommended additional repairs: Air Filter
• Housing Type: with housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Pikkus (mm): 50
• Laius (mm): 60
• Jämedus/Tugevus (mm): 40
• Ühenduste arv: 3
• Kaal (kg): 0,041
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: 111.948,111.950
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pistikukatte kuju: nurga all
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kaal (kg): 0,05
• Manufacturer: VALEO

• Pinge [V]: 12
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Anduritüüp: Impulssandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pikkus (mm): 50
• Laius (mm): 60
• Jämedus/Tugevus (mm): 40
• Ühenduste arv: 3
• Kaal (kg): 0,041
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 10 93 3737
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 5
• Housing Type: with housing

• OE-numbri jaoks: 525428
• Manufacturer: KAMOKA

• OE-numbri jaoks: 162 094 31 48
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Manufacturer: FAE

• Engine Code: M 111.950
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Pistikkontaktide arv: 2
• Manufacturer: DELPHI

• Engine Code: M 111.948
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• OE-numbri jaoks: 000 540 9217
• Kaablipikkus (mm): 1 020
• Pistikkontaktide arv: 4
• Lambda andur: soojendatud
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: M 111.948, M 111.950
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 3
• Length [mm]: 24
• Sensor Type: Hall Sensor
• Manufacturer: METZGER

• Engine Code: M 111.950
• Pistikkontaktide arv: 5
• Korpusetüüp: koos korpusega
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Engine Code: 111950
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Engine Code: M 111.948
• Kaablipikkus (mm): 1
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20274-12B1

• Engine Code: 111948
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 100
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Engine Code: M 111.950
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• OE-numbri jaoks: 000 540 3917
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Lambda andur: soojendatud
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: M 111.950
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV502

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,180
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV628

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Engine Code: M 111.948
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Läbimõõt survetorusikuühendus [mm]: 5, 6,5
• Pikkus [m]: 1
• Materjal: Silikoon
• keem.omadus: õlikindel
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: +350
• Pingutusala alates [mm]: 10, 11, 11,5, 12,5
• Pingutusala kuni [mm]: 12,5, 13,5, 14, 15
• SVHC: SVHS aineid ei esine
• Manufacturer: HBE

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga Piirangutega toode/piirangu info 2: ühendusjuhtmestikuga, koos kaitsevoolikuga, koos nugisekaitsega, koos kammitsatega Tehniline informatsioon: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: M 111.950
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 111.950
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Manufacturer: BOSCH
• Name: BS 0258986505

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.25
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 317
• Lambda andur: Sõrmesensor, soojendatud
• Manufacturer: DELPHI

• Lambda andur: Sond
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ümar
• Kaablipikkus (mm): 870
• OE-numbri jaoks: 000 540 65 17, 2D0 906 265
• Manufacturer: MEAT&DORIA

• Engine Code: M 111.950
• soovitatav remondimahtu suurendamine: Õhufilter
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,2
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 111.948, M 111.950
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: M 111.950
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 770
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Manufacturer: BOSCH

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Pistikute teostus: Male
• Korpusevärv: must
• Pinge [V]: 12
• soovitatav remondimahtu suurendamine: Õhufilter
• Manufacturer: DELPHI
• Name: DE AF10282-12B1

• OE-numbri jaoks: A0000940948
• Garantii: 5 aastat garantii
• Üldine informatsioon: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: M 111.950
• Vehicle Identification Number (VIN) from: 246706
• Length [mm]: 130
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: FACET

• Engine Code: 111.948,111.950
• Pistikkontaktide arv: 5
• Piirangutega toode/piirangu info 2: koos integreeritud õhutemp.anduriga
• Pistikukatte kuju: D-kuju
• Anduritüüp: Heißfilmmassensensor
• Pinge [V]: 12
• Pikkus (mm): 182
• Laius (mm): 165
• Kõrgus (mm): 125
• Kaal (kg): 0,3
• Name: OHUMASSIMOOTJA
• Manufacturer: VAL

• Engine Code: M 111.950
• soovitatav remondimahtu suurendamine: Õhufilter
• Manufacturer: BOSCH
• Name: BS 0280217114