Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)




-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Height [mm]: 39
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
rear, for one wheel -
Additional information: Wheel bearing kit,
rear, for one wheel



- Thickness [mm]: 26
- Inner Diameter [mm]: 58
-
Outer Diameter [mm]: 60,
65 - Weight [kg]: 0.04
-
Name: Kaas,
rattalaager - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Width [mm]: 18
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 62
- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
outer, Front Axle Right - Weight [kg]: 0.219
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 18
- Width 2 [mm]: 18
- Outer Diameter 1 [mm]: 50
- Outer Diameter 2 [mm]: 62
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 35
- Manufacturer: GSP LOZYSKA I PIASTY KOL



- Supplementary Article/Info 2: with nut
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
ME- 021 - Manufacturer: NTY
-
Name: NTY KLP-
ME- 021
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- Fitting Position: Front Axle
- Width 1 [mm]: 17
- Width 2 [mm]: 18
- Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 22
- Manufacturer: KAMOKA


- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ABS sensor ring
- Width [mm]: 18.3
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 50
- Manufacturer: JPN


- Fitting Position: Front Axle
- Supplementary Article/Info 2: with shaft seal
- Width 1 [mm]: 18.2
- Width 2 [mm]: 18.5
- Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 22
- Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL


-
Fitting Position: Rear Axle,
outer - Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84.2
- Net weight [kg]: 0.97
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK



- Fitting Position: Rear Axle
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX


- Fitting Position: Rear Axle
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Quality class: PJ
- Name: Wheel bearing kit



-
Fabrication Number: KLT-
ME- 004 - Manufacturer: NTY
Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



-
Fitting Position: Rear Axle,
Front Axle - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: Two
- Width 1 [mm]: 39
- Outer Diameter 1 [mm]: 84
- Inner Diameter 1 [mm]: 45
- Manufacturer: GSP


- Fitting Position: Rear Axle
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Manufacturer: DENCKERMANN ZAWIESZENIE







- Fitting Position: Front Axle
- Width [mm]: 18
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 50
- Width 2 [mm]: 17.5
- Supplementary Article/Info 2: without wheel hub
- Outer Diameter 2 [mm]: 62
- Inner Diameter 2 [mm]: 35
- Manufacturer: OPTIMAL
- Additional information: 401157 OPT
- Lisainfo: 401157 OPT


- Fitting Position: Rear Axle
- Required quantity: 2
- Manufacturer: DRIVE


- Fitting Position: Front Axle
- Width [mm]: 18
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 50
- Width 2 [mm]: 18
- Inner Diameter 2 [mm]: 35
- Outer Diameter 2 [mm]: 62
- Net weight [kg]: 0.5
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK


- Fitting Position: Rear Axle
- Outer Diameter [mm]: 84
- Inner Diameter [mm]: 45
- Width [mm]: 39
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX


- Fitting Position: Rear Axle
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Height [mm]: 39
- Bearing Type: Ball Bearing
- Gasket Design: Soft Material Gasket
- Name: RATTALAAGER
- Manufacturer: MEY
Alternative Repair Kit: 014 033 0101, 014 098 0008, 014 098 0009, 014 098 0011


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE LR+RE
- for OE number: 2029800016
- Inner Diameter [mm]: 45
- Width 1 [mm]: 39
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL


- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: DRIVE





- Fitting Position: Rear Axle
- Width [mm]: 39
- Outer Diameter [mm]: 84
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY


-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: FRONT LR+FR LR+FR
- for OE number: 2033300051
- Inner Diameter [mm]: 35
- Inner Diameter 2 [mm]: 22
- Width 1 [mm]: 18
- Width 2 [mm]: 50
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Name: DA KWD1055
- Manufacturer: DAYCO


- Fitting Position: Rear Axle
- Weight [kg]: 1.2
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Manufacturer: IJS


- Fitting Position: Rear Axle
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter 1 [mm]: 84
- Manufacturer: METELLI LOZYSKA KOLA PIASTY


- Outer Diameter 1 [mm]: 50
- Width 1 [mm]: 17
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: SNR
- Name: SN R151.36
- Additional information: R151.36 SNR
- Lisainfo: R151.36 SNR


- Fitting Position: Rear Axle
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Height [mm]: 39
- Bearing Type: Ball Bearing
-
Gasket Design: Multilayer Steel
(MLS) - Name: RATTALAAGER
- Manufacturer: MEY
Alternative Repair Kit: 014 098 0009, 014 033 0101, 014 098 0008, 014 098 0011


- Fitting Position: Front Axle
- Width [mm]: 18.5
- Inner Diameter [mm]: 22
- Outer Diameter 1 [mm]: 50
- Manufacturer: METELLI LOZYSKA KOLA PIASTY


- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 18
- Width 2 [mm]: 17.5
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 22
- Weight [kg]: 0.408
- Supplementary Article/Info 2: with shaft seal
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
- Additional information: FE27311
- Lisainfo: FE27311
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Height [mm]: 39
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.






- Fitting Position: Rear Axle
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Manufacturer: OPTIMAL


- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Height [mm]: 39
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.









- Fitting Position: Front Axle
- Bearing Type: Tapered Roller Bearing
- for OE number: 203 330 0051
- Supplementary Article/Info 2: with ABS sensor ring
- Width [mm]: 18.3
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 50
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Bearing Type: Angular Ball Bearing
- Supplementary Article/Info 2: with screw set
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.2
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 45
- Outer Diameter 1 [mm]: 84
- Weight [kg]: 0.98
- Width 1 [mm]: 39
- Manufacturer: ABS


- Outer Diameter 1 [mm]: 84
- Width 1 [mm]: 39
- Tightening Torque [Nm]: 170
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: SNR
- Name: SN R151.07


- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 18
- Width 2 [mm]: 17.5
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 22
- Weight [kg]: 0.662
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Right,
Left, Front Axle - Inner Diameter 1 [mm]: 35
- Width 2 [mm]: 17
- Inner Diameter 2 [mm]: 22
- Outer Diameter 2 [mm]: 50
- Outer Diameter 1 [mm]: 62
- Width 1 [mm]: 18
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN R151.36S









































- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF


- Fitting Position: Rear Axle
- Required quantity: 2
- Weight [kg]: 0.885
- Packaging length [cm]: 10.9
- Packaging width [cm]: 8.4
- Packaging height [cm]: 10.9
- Outer Diameter [mm]: 84
- Inner Diameter [mm]: 45
- Width [mm]: 39
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ


- Width [mm]: 19
- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 18
- Width 2 [mm]: 17.5
- Inner Diameter 1 [mm]: 35
- Weight [kg]: 0.662
- Inner Diameter 2 [mm]: 22
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Name: SW 10 92 2435
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 0.546
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Supplementary Article/Info 2: with shaft seal
- Outer Diameter [mm]: 62
- Outer Diameter 2 [mm]: 50
- Inner Diameter [mm]: 35
- Inner Diameter 2 [mm]: 22
- Width [mm]: 18.2
- Width 2 [mm]: 18.5
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ


- Width [mm]: 39
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.788
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 35
- Outer Diameter 1 [mm]: 50
- Outer Diameter 2 [mm]: 62
- Height 1 [mm]: 18.65
- Height 2 [mm]: 19
- Bearing Type: Tapered Roller Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.


- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter 1 [mm]: 35
- Outer Diameter 1 [mm]: 62
- Width 1 [mm]: 19
- Inner Diameter 2 [mm]: 22
- Outer Diameter 2 [mm]: 50
- Width 2 [mm]: 18.4
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG



- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Width [mm]: 39
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.



- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 84
- Width [mm]: 39
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG









































- Fitting Position: Front Axle
- Required quantity: 2
- Width 1 [mm]: 18.2
- Width 2 [mm]: 18.5
- Supplementary Article/Info 2: with shaft seal
- Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 50
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 22
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF









- Fitting Position: Front Axle
- Width [mm]: 18.3
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 50
-
Mounting Type: Pre-
assembled - Outer Diameter 2 [mm]: 62
- Inner Diameter 2 [mm]: 35
- Manufacturer: OPTIMAL
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring


- Width [mm]: 150
- Thickness [mm]: 89
- Outer Diameter [mm]: 150
- Bolt Hole Circle Ø [mm]: 112
- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 2.02
- Observe service information:
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Width [mm]: 150
- Thickness [mm]: 89
- Outer Diameter [mm]: 150
- Bolt Hole Circle Ø [mm]: 112
- Bearing Type: Tapered Roller Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 2.02
- Observe service information:
- Name: SW 10 93 6077
- Manufacturer: SWAG
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.