• Spanner Size: 19
• Number of pins: 2
• Thread Size: M14 x 1,5
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: R337626
• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0292
• Additional information: 21-0292

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: OM 611.981
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Engine Code: OM 611.981
• Manufacturer: FACET

• Thread Size: 15 mm
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) to: R 337626
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Engine Code: OM 611.981
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Engine Code: OM 611.981
• Manufacturer: FACET

for article number: 7.8588, 7.8589, 7.8590, 7.8591, 7.8592, 7.8593, 7.8594, 7.8595, 7.8596, 7.8597, 7.8598, 7.8784, 7.8847, 7.8935

Manufacturer: FAST

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• Length [mm]: 52
• for OE number: 6511530028
• Manufacturer: MEAT&DORIA

• Height [mm]: 50.6
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: **********R337626
• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000
• Manufacturer: NTY

• Engine Code: OM 611.981
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Engine Code: OM 611.981
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: ERA

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.02
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Required quantity: 1
• Vehicle Identification Number (VIN) to: R 337626
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: OM 611.981
• Height [mm]: 18.2
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 05080346AA
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: grey
• Number of mounting bores: 1
• Manufacturer: FAST

• Number of connectors: 3
• Manufacturer: JPN

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 24.3
• for OE number: 0031539728
• Manufacturer: MEAT & DORIA

Manufacturer: FAST

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. DB CLK 05-
• Manufacturer: BRM

• Housing Type: without housing
• Supplementary Article/Info 2: without integrated air temperature sensor
• Number of pins: 5
• Connector Shape: D Shape
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Additional information: 120-08-071 ABAK
• Lisainfo: 120-08-071 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE ELEKTRYKA

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 260
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 3
• Manufacturer: VERNET

• Thickness [mm]: 34.3
• Outer Diameter [mm]: 7.5
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 72 28
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253825
• Additional information: VAL253825

• for special equipment code: Z 522.630/02
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: OM 611.981
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• Output Voltage, from [V]: 0.314
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.102
• Manufacturer: EPS

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

• Engine Code: OM 611.981
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• Output Voltage, from [V]: 0.314
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Thickness [mm]: 34.3
• Outer Diameter [mm]: 7.5
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 72 28
• Name: SW 10 93 8494
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Alternative Repair Kit: 550509
• Resistor [kOhm]: 145
• Manufacturer: ERA

• for OE number: 0061539828
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 260
• Manufacturer: VDO

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Voltage [V]: 12
• Number of pins: 5
• Fabrication Number: EPP-ME-014
• Manufacturer: NTY
• Name: NTY EPP-ME-014

• Number of pins: 3
• Fabrication Number: ECS-ME-004
• Manufacturer: NTY

• Number of connectors: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV790

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 260
• Manufacturer: FAE

• for OE number: 162 094 31 48
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: Low Pressure Side
• for special equipment code: KL5, 987
• Number of pins: 3
• Spanner Size: 24
• Name: CZUJNIK CI—N. SPALIN DB C 220 CDI 00-
• Manufacturer: MEY

• Length [mm]: 50
• Pressure [bar]: 1,500
• Pressure to [bar]: 1,500
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Material: Plastic
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: CZUJNIK CI—N. PALIWA DB
• Manufacturer: MAX

• Number of pins: 4
• Plug Type: Round Plug
• Housing Type: with housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Guarantee: 5 years guarantee
• Colour Coding: grey
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: Fuel Line (high pressure side)
• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 5
• Housing Type: with housing
• Lisainfo: Air meter
• Additional information: Air meter

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV503
• Manufacturer: ESEN SKV

• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Engine Number to: ..835761
• Supplementary Article/Info 2: High Pressure Side
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Thread Size: M18X1.5
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 1,500
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST

• for OE number: 007 153 4328
• Manufacturer: TRUCKTEC

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.35
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV027

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Fuel Mixture Formation: Direct Injection
• Manufacturer: FAST

• for OE number: 003 153 97 28
• Sensor Type: Hall Sensor, Active sensor
• Required quantity: 1
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Colour Coding: grey
• Resistor [kOhm]: 145
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: FAST

• for special equipment code: KL5, ZS8
• Number of pins: 3
• Fitting Position: EGR Valve
• Article number of recommended accessories: N007603012100
• Manufacturer: METZGER

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• for OE number: 009 153 50 28
• Guarantee: 3 years guarantee
• Length [mm]: 24
• Width [mm]: 27
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Engine Code: OM 611.981
• Operating Mode: Electric
• Voltage [V]: 12
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Engine Number to: 835761
• Manufacturer: YSPARTS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Manufacturer: MAGNETI MARELLI

• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Number of pins: 5
• Transmission Type: Manual Transmission
• Manufacturer: METZGER

• Number of pins: 5
• Manufacturer: METZGER

Transmission Type: Automatic Transmission, Manual Transmission, automatically operated

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring