• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature, 2 pins
• Additional information: Sender for water temperature, 2 pins

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: M 275.981
• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• for OE number: 099 905 3800
• Manufacturer: TRUCKTEC

• Number of pins: 2
• Length [mm]: 88
• Height [mm]: 89.5
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

Manufacturer: FAST

• Engine Code: M 275.981
• Name: EP 1.994.014
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020
• Manufacturer: NTY

• Fabrication Number: ECP-ME-001
• Manufacturer: NTY

• Number of pins: 2
• Manufacturer: ERA

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV682
• Manufacturer: ESEN SKV

Manufacturer: FAST

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• Length [mm]: 52
• for OE number: 651 153 00 28
• Manufacturer: MEAT&DORIA

• Sensor Type: Passive sensor
• for OE number: 05080352AA
• Manufacturer: KAMOKA

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: M 275.981
• Name: EP 1.830.300
• Manufacturer: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Construction Year from: 02.2005
• Engine Number from: 40013259
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000
• Manufacturer: NTY

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• for OE number: 099 905 38 00
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358058181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• for OE number: 099 905 38 00
• Name: SW 10 93 4074
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAE

• Fabrication Number: ESS-ME-000
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10269

• Engine Code: M 275.981
• Height [mm]: 18.2
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 02.2005
• Engine Number from: 40013259
• Number of pins: 3
• Colour: black
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV330

• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Fabrication Number: ECP-ME-006
• Number of pins: 3

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Fabrication Number: ECP-ME-003
• Manufacturer: NTY

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Engine Code: M 275.981
• Name: EP 1.953.578
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Sensor Type: Inductive Sensor
• Number of pins: 2

• Number of pins: 2
• Manufacturer: DELPHI

• Construction Year from: 09.2004
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114371

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thickness [mm]: 21, 18
• Inner Diameter [mm]: 8.3
• Outer Diameter [mm]: 45
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Engine Number from: 40013259
• Required quantity: 1
• Construction Year from: 02.2005
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

• Thickness [mm]: 21, 18
• Inner Diameter [mm]: 8.3
• Outer Diameter [mm]: 45
• Number of connectors: 2
• Weight [kg]: 0.045
• Name: SW 10 93 7269
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2004
• Construction Year to: 12.2011
• Manufacturer: BOSCH

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009110851

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: FAE

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: M 275.981
• Construction Year from: 02.2005
• Engine Number from: 40013259
• Required quantity: 2
• Name: EP 1.953.387
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year from: 02.2005
• Quantity: 2
• Engine Number from: 40013259
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11033

• Transmission Type: Manual Transmission
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 275.981
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 254008

• Construction Year from: 02.2005
• Required quantity: 2
• Engine Number from: 40013259
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168001

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10218

• Engine Number from: 40013259,60009366
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11151

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Length [mm]: 900
• Fabrication Number: ESL-ME-000
• Manufacturer: NTY

• Construction Year from: 02.2005
• Construction Year to: 12.2011
• Engine Number from: ..40013259
• Manufacturer: BOSCH

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Engine Code: M 275.981
• Trim Level: AMG Black Series
• for SA code: P99
• Lambda Sensor: Regulating Probe
• Required quantity: 2
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Height [mm]: 40
• Quality: IAM
• Manufacturer: METZGER

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Name: SW 10 93 8292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HITACHI

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.082
• Name: SW 33 10 3189
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 03.2005
• for OE number: 003 153 97 28
• Sensor Type: Hall Sensor, Active sensor
• Supplementary Article/Info 2: for camshaft, without cable
• Required quantity: 1
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Colour Coding: grey
• Resistor [kOhm]: 145
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Weight [kg]: 0.027
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 275.981
• Construction Year from: 09.2004
• Lambda Sensor: Diagnostic Probe, Planar probe
• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 800
• Manufacturer: MEAT&DORIA

• Construction Year from: 02.2005
• Required quantity: 2
• Engine Number from: 40013259
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Block Separation:
• Quantity: 2
• Cable Length [mm]: 380
• Manufacturer: DELPHI
• Name: DE ES20313-12B1

Fitting Position: Left, Right, Front, after catalytic converter, before catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated

• Construction Year to: 01.2008
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• for SA code: P99
• Cable Length [mm]: 470
• Manufacturer: DELPHI
• Name: DE ES20175-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"

• Construction Year from: 09.2004
• Construction Year to: 12.2011
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: M 275.981
• Block Separation:
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.290
• Manufacturer: EPS

Fitting Position: Left, Right, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 09.2004
• Construction Year to: 12.2011
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 400
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.2004
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Manufacturer: FAE