• Spring Type: for vehicles with air suspension
• Outer Diameter [mm]: 47
• Overall Length [mm]: 99
• Manufacturer: HENGST FILTER

• OE-numbri jaoks: 002 542 2319
• Pinge [V]: 12
• Name: RELEE, NIVOOREGULEERIMINE
• Manufacturer: TRU
• Lisainfo: 02.42.353
• Additional information: 02.42.353

• Trim Level: Air suspension AIRMA
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 99
• Välisläbimõõt [mm]: 41
• Sisend-Ø (mm): 10,4
• Väljalase-Ø (mm): 8
• Välisläbimõõt 1 [mm]: 47
• SVHC: SVHS aineid ei esine
• Name: KšTUSEFILTER
• Manufacturer: MAN

• for SA code: 489
• Name: Paigutus, suruohukompressor
• Manufacturer: MAX

• Number of pins: 5
• Relay function: Air Suspension
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for SA code: 489
• Kaal (kg): 0,016
• pakendi pikkus [cm]: 10
• pakendi laius [cm]: 10
• pakendi kõrgus [cm]: 2
• Manufacturer: FEBEST
• Lisainfo: 1698-AC-KIT FEBEST
• Additional information: 1698-AC-KIT FEBEST

Fitting Position: Front

• Valve type: Multiport Valve
• New part without deposit:
• Used part return not required:
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• OE-numbri jaoks: 211 320 0158
• Klapitüüp: Magnetklapp
• Manufacturer: TRUCKTEC

• Valve type: Multiport Valve
• Weight [kg]: 0.36
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 2, 3
• Number of connectors: 5
• Supplementary Article/Info 2: with sensor, with retaining ring
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 93SKV807

• Fabrication Number: EZC-ME-206
• Fitting Position: Rear Axle both sides
• Manufacturer: NTY

• Fitting Position: Rear, Left
• paired article number: 131-02-310
• Manufacturer: ABAKUS DEPO/LORO
• Additional information: 131-02-309 ABAK
• Lisainfo: 131-02-309 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fabrication Number: EZC-ME-205
• Fitting Position: Rear Axle Right
• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Suspension: for vehicles without AMG suspension
• paired article number: EZC-ME-204
• Manufacturer: NTY

• Fabrication Number: EZC-ME-204
• Fitting Position: Rear Axle Left
• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Suspension: for vehicles without AMG suspension
• paired article number: EZC-ME-205
• Manufacturer: NTY

• for OE number: 211 320 0304
• Name: Kompressor,suruohussteem
• Manufacturer: MAX
• Lisainfo: 27-5001
• Additional information: 27-5001

• Klapitüüp: Mitmeotstarbeline klapp
• Piirangutega toode/piirangu info: koos tihenditega
• Pistikkontaktide arv: 10
• Ühenduste arv: 5
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Läbimõõt 2 (mm): 20
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vedrustustüüp: õhkvedrustusega sõidukile
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: KAMOKA

• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Rear Axle Left
• Warranty: 3 years warranty
• Weight [kg]: 3.9
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 58SKV057

• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Rear Axle Right
• Warranty: 3 years warranty
• Weight [kg]: 3.9
• Always compare old and new part (in particular OE No.):
• Name: CE 58SKV058
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Pistikkontaktide arv: 3, 2
• Piirangutega toode/piirangu info 2: koos turvarõngaga, koos anduriga
• Ühenduste arv: 5
• Piirangutega toode/piirangu info: koos tihenditega
• Klapitüüp: Mitmeotstarbeline klapp
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Pinge [V]: 12
• Ühenduste arv: 2
• Kaal (kg): 4
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 211 320 0304
• Manufacturer: TRUCKTEC AUTOMOTIVE
• Lisainfo: 02.30.149
• Additional information: 02.30.149

• Manufacturer: WAB

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO DB E/S-KLASA 98-09 (REGENEROWANY)

• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle Right
• Manufacturer: METALCAUCHO

• Vedrustustüüp: õhkvedrustusega sõidukile
• pakendi pikkus [cm]: 29,8
• pakendi laius [cm]: 18,4
• pakendi kõrgus [cm]: 20,3
• Kaal (kg): 4,4
• Netokaal [kg]: 4
• toodetud: Hiina
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: ARNOTT

• Installatsiooni pool: Esisild
• Name: Loots,ohkvedrustus
• Manufacturer: JPA

• Vedrustustüüp: õhkvedrustusega sõidukile
• pakendi pikkus [cm]: 30
• pakendi laius [cm]: 19
• pakendi kõrgus [cm]: 22
• Kaal (kg): 4,5
• Netokaal [kg]: 4,2
• toodetud: Saksamaa
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: ARNOTT

Lisainfo: 00-06 Mercedes-Benz S-Class (W220) w/o 4Matic, 03-06 S-Class (W220) w/ 4Matic, 02-09 E-Class (W211), 04-11 CLS-Class, 02-12 Maybach 57 62 Additional information: 00-06 Mercedes-Benz S-Class (W220) w/o 4Matic, 03-06 S-Class (W220) w/ 4Matic, 02-09 E-Class (W211), 04-11 CLS-Class, 02-12 Maybach 57 62

• Installatsiooni pool: Tagasild
• Name: Loots,ohkvedrustus
• Manufacturer: JPA

• Spring Type: for vehicles with air suspension
• Manufacturer: WAB

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO DB W211 SYS AIRMATIC WABCO NOWY Z KAUCJ¤ !

• Vedrustustüüp: õhkvedrustusega sõidukile
• Šassii: ilma AMG-ta sõidukite jaoks
• ainult paarina välja vahetada:
• Installatsiooni pool: taga
• pakendi pikkus [cm]: 37
• pakendi laius [cm]: 18,5
• pakendi kõrgus [cm]: 18,5
• Kaal (kg): 2,4
• Netokaal [kg]: 2
• toodetud: Madalmaad
• Amort-kinnitusliik: sild üleval, Silma all
• Manufacturer: ARNOTT

Piduri-/sõidudünaamika: Sõidukite jaoks koos ADS, Sõidukite jaoks Airmatic DC-ga Lisainfo: 02-09 Mercedes-Benz E-Class (W211) w/ 4Matic, 02-09 E-Class (w211) w/o 4Matic, 04-11 CLS-Class (W219) vasak või parem Additional information: 02-09 Mercedes-Benz E-Class (W211) w/ 4Matic, 02-09 E-Class (w211) w/o 4Matic, 04-11 CLS-Class (W219) vasak või parem

• OE-numbri jaoks: 211 320 5413 n.cpl.1
• Installatsiooni pool: esisild mõlemapoolselt
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• paired article number: MJAS040
• Manufacturer: JAPKO

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• paired article number: MJAS039
• Manufacturer: JAPKO

• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Right Front
• Generally overhauled:
• Used part return required:
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 20
• Weight [kg]: 8.8
• Net weight [kg]: 7.7
• Manufactured in: USA
• paired article number: AS-2245
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• Manufacturer: ARNOTT

Lisainfo: 04-11 Mercedes-Benz CLS-Class (W219), 02-09 E-Class (W211) w/o 4Matic, 03-09 E-Class Wagon (W211) w/o 4Matic Additional information: 04-11 Mercedes-Benz CLS-Class (W219), 02-09 E-Class (W211) w/o 4Matic, 03-09 E-Class Wagon (W211) w/o 4Matic

• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Left Front
• Generally overhauled:
• Used part return required:
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 22
• Weight [kg]: 8.8
• Net weight [kg]: 7.7
• Manufactured in: USA
• paired article number: AS-2246
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• Manufacturer: ARNOTT

Lisainfo: 04-11 Mercedes-Benz CLS-Class (W219), 02-09 E-Class (W211)w/o 4Matic, 03-09 E-Class Wagon (W211) w/o 4Matic Additional information: 04-11 Mercedes-Benz CLS-Class (W219), 02-09 E-Class (W211)w/o 4Matic, 03-09 E-Class Wagon (W211) w/o 4Matic

• for OE number: 211 320 5513
• Fitting Position: Front Axle Left
• Manufacturer: TRUCKTEC

• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Installatsiooni pool: Tagasild paremal
• Vedrukuju: Õhuamort
• Hooldusinfot jälgida:
• Jälgige sõidukitootja juhiseid:
• paaris tootenumbrid: 40-076614
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
MERCEDES E (W211)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES E (W211)
(kvaliteediklass: Q)"

• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Installatsiooni pool: Tagasild vasakul
• Vedrukuju: Õhuamort
• Hooldusinfot jälgida:
• Jälgige sõidukitootja juhiseid:
• paaris tootenumbrid: 40-076621
• Manufacturer: BILSTEIN
• Name: Air suspension module left
• Quality class: Q

Additional information: "Tootja: BILSTEIN
MERCEDES E (W211)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES E (W211)
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• paired article number: MM-AS039
• Name: Ohuamort
• Manufacturer: JPA

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• paired article number: MM-AS040
• Name: Ohuamort
• Manufacturer: JPA

• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Left Front
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 20
• Weight [kg]: 9.6
• Net weight [kg]: 8.4
• Manufactured in: The Netherlands
• paired article number: AS-2785
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• Manufacturer: ARNOTT

Lisainfo: 02-09 Mercedes-Benz E-Class (W211) w/o 4Matic, 04-11 CLS-Class (W219) Additional information: 02-09 Mercedes-Benz E-Class (W211) w/o 4Matic, 04-11 CLS-Class (W219)

• Spring Type: for vehicles with air suspension
• Braking/Drive Dynamics: for vehicles with Airmatic DC
• Fitting Position: Right Front
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 20
• Weight [kg]: 9.6
• Net weight [kg]: 8.4
• Manufactured in: The Netherlands
• paired article number: AS-2786
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• Manufacturer: ARNOTT

Lisainfo: 02-09 Mercedes-Benz E-Class (W211) w/o 4Matic, 04-11 CLS-Class (W219) Additional information: 02-09 Mercedes-Benz E-Class (W211) w/o 4Matic, 04-11 CLS-Class (W219)

• Fitting Position: Front Axle Right
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Left
• Manufacturer: METALCAUCHO