Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Left
- for OE number: 35428218
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 475
- Number of pins: 4
- Weight [g]: 113
- Gross Weight [g]: 146
-
Name: DN DOX-
2044 - Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"
-
Fabrication Number: ECT-
ME- 004 - Manufacturer: NTY
-
Name: NTY ECT-
ME- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: M 156.982
- Required quantity: 1
- Name: EP 1.994.014
- Manufacturer: EPS
-
Additional information: 1-
994- 014 -
Lisainfo: 1-
994- 014
- Quantity: 1
- Thread Size: 15 mm
- Manufacturer: CALORSTAT BY VERNET
- Weight [kg]: 0.01
- Guarantee: 3 years guarantee
- Number of pins: 2
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV682
- Manufacturer: ESEN SKV
- Construction Year to: 04.2009
- Number of pins: 2
- Manufacturer: DELLO AUTOMEGA
- Engine Code: M 156.982
- Sensor Type: NTC Sensor
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Connector Shape: oval
- Manufacturer: ERA
- Engine Code: M 156.982
- Housing Colour: black
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Manufacturer: EPS
- Required quantity: 1
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009109291
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: M 156.982
- Housing Colour: black
- Sensor Type: NTC Sensor
- Manufacturer: FAE
- Engine Code: M 156.982
- Quantity: 1
- Operating voltage [V]: 12
- Sensor Type: NTC Sensor
- Number of pins: 2
- Manufacturer: MEYLE
-
Fabrication Number: ECP-
ME- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 04.2009
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
-
for OE number: 5946 21,
004 153 90 28, 89615 05010 - Manufacturer: MEAT&DORIA
- Colour: black
- Alternatively:
- Number of pins: 2
- Fitting Depth [mm]: 18.3
- Weight [kg]: 0.046
- Manufacturer: ERA
- Alternatively:
- Number of pins: 2
- Alternative Repair Kit: 550777
- Manufacturer: ERA
- Construction Year to: 04.2009
- Manufacturer: BOSCH
- Weight [kg]: 0.014
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: MAGNETI MARELLI
Manufacturer: MAGNETI MARELLI
- Number of pins: 2
- Manufacturer: DELPHI
- Name: DE AS10171
- Quantity: 1
- for model code: 3 Pin
- Number of pins: 3
- Pressure from [kPA]: 10
- Manufacturer: DELPHI
- Engine Code: M 156.982
- Name: EP 1.957.001
- Manufacturer: EPS
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: rectangular
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PG013114361
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Construction Year to: 04.2009
- Manufacturer: BOSCH
- for OE number: 004 153 3028
- Manufacturer: TRUCKTEC
- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 24
- Manufacturer: ERA
Air Pressure Sensor,
EPS
- Engine Code: M 156.982
- Required quantity: 1
- Pressure from [kPA]: 10
- Pressure to [kPA]: 127
- Output Voltage, from [V]: 0.503
- Output Voltage, up to [V]: 4.75
- Name: EP 1.993.106
- Manufacturer: EPS
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe - Length [mm]: 330
-
Fabrication Number: ESL-
ME- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Left,
Intake Side - Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- Construction Year to: 04.2009
- Fitting Position: Exhaust Side
- Manufacturer: BOSCH
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV909
- Resistor [Ohm]: 9
- Conductor Number: 4
- Number of circuits: 4
- Length [mm]: 320
- Cable Length [mm]: 320
- Lambda Sensor: Heated
- Name: MM OSM118
- Manufacturer: MAGNETI MARELLI
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe - Number of pins: 4
- Cable Length [mm]: 380
- for article number: 0045420818
- Manufacturer: MEAT&DORIA
- Lambda Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 490
- Number of circuits: 4
- Weight [kg]: 0.13
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV700
- Construction Year to: 04.2009
- Supplementary Article/Info 2: Low Pressure Side
-
Fuel Mixture Formation: Manifold Injection/
Direct Injection - Manufacturer: BOSCH
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 325
- Manufacturer: DELPHI
-
Fabrication Number: ESL-
CH- 032
Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: M 156.982
- Fitting Position: after catalytic converter
- Cable Length [mm]: 300
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.235
- Number of circuits: 4
- Name: EP 1.998.202
- Manufacturer: EPS
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Construction Year to: 04.2009
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 310
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Construction Year to: 04.2009
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Fitting Position: Left
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV402
- Manufacturer: ESEN SKV
Air Pressure Sensor,
VEMO
- Quantity: 1
- Weight [kg]: 0.02
- for OE number: A 004 153 32 28
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 003 542 7018
- Cable Length [mm]: 550
- Number of pins: 5
-
Lambda Sensor: Regulating Probe,
Heated - Manufacturer: TRUCKTEC AUTOMOTIVE
- Engine Code: 156.982
-
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 300
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.13
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year to: 04.2009
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 330
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Name: BS 0258006749
- Lambda Sensor: Broadband lambda sensor
- Number of circuits: 5
- Overall Length [mm]: 560
- Manufacturer: FAST
- Lambda Sensor: Broadband lambda sensor
- Number of pins: 5
- Cable Length [mm]: 410
- for article number: 81577E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- for OE number: 003 542 7118
- Cable Length [mm]: 800
- Number of pins: 5
- Lambda Sensor: Broadband lambda sensor
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 625
- Number of pins: 6
- Manufacturer: ERA
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.2
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: M 156.982
-
Fitting Position: Right Front,
before catalytic converter - Colour: black
- Length [mm]: 560
- Cable Length [mm]: 570
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.472
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Manufacturer: SKV GERMANY
- Name: CE 09SKV915
-
Fitting Position: Left Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated -
Cable Length [mm]: 1,
300 -
Name: DE ES21203-
12B1 - Manufacturer: DELPHI
- Construction Year to: 04.2009
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Right - Number of circuits: 5
- Overall Length [mm]: 560
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
-
Fitting Position: Right Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Cable Length [mm]: 600
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PA009166811
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Fitting Position: Right Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Cable Length [mm]: 541
-
Name: DE ES20552-
12B1 - Manufacturer: DELPHI
- Engine Code: 156.982
- Alternatively:
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 350
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.14
- Name: VA 368396
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 540
- Number of circuits: 5
- Manufacturer: ERA
- Engine Code: M 156.982
-
Fitting Position: Left Front,
before catalytic converter -
Cable Length [mm]: 1,
300 - Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.490
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Construction Year to: 04.2009
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Left - Number of circuits: 5
-
Overall Length [mm]: 1,
260 -
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Lambda Sensor: Broadband lambda sensor
- Number of pins: 5
- Cable Length [mm]: 410
- for article number: 81577
- for OE number: 13627791592
- Manufacturer: MEAT&DORIA
- Engine Code: 156.982
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 350
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.152
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Number of mounting bores: 3
- Number of pins: 6
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Transmission Type: Automatic Transmission
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Right
-
Lambda Sensor: Regulating Probe,
Heated - Voltage [V]: 12
- Conductor Number: 5
- Cable Length [mm]: 830
- Number of pins: 6
- Manufacturer: PIERBURG