Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Left
-
for OE number: 0045420818,
45420818 - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 500
- Number of pins: 4
- Weight [g]: 146
- Gross Weight [g]: 179
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV909
- Construction Year to: 07.2010
-
Lambda Sensor: Diagnostic Probe,
Finger probe - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Connector Shape: oval
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 25
- Cable Length [mm]: 210
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: NRF
- Lambda Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 490
- Number of circuits: 4
- Weight [kg]: 0.13
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV700
-
External Thread Size: M14 x 1,
5 - Number of connectors: 2
- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 230
- Weight [kg]: 0.035
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
- Connector Shape: oval
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 41
- Cable Length [mm]: 294
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: NRF
- Voltage [V]: 12
- Cable Length [mm]: 300
- Number of pins: 2
- Warranty: 3 years warranty
- Weight [kg]: 0.09
- Operating Mode: Electric
- Manufacturer: SKV GERMANY
- Name: CE 30SKV128
-
Fabrication Number: ESL-
CH- 032 - Manufacturer: NTY
Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: M 273.922
- Required quantity: 2
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 06.2006
- Construction Year to: 07.2010
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.2010
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Fitting Position: Left
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Warranty: 3 years warranty
- Name: CE 09SKV402
- Manufacturer: ESEN SKV
-
External Thread Size: M14 x 1,
5 - Number of connectors: 2
- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 230
- Weight [kg]: 0.035
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Planar probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 500
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
Fitting Position: after catalytic converter, left cylinder row, right cylinder row
- Construction Year to: 07.2010
-
Lambda Sensor: Regulating Probe,
Heated - Length [mm]: 550
- Resistor [Ohm]: 4.9
- Conductor Number: 5
- Number of circuits: 5
- Cable Length [mm]: 550
- Manufacturer: MAGNETI MARELLI
- Construction Year to: 07.2010
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 490
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: M 273.922
- Fitting Position: before catalytic converter
- Colour: black
- Length [mm]: 560
- Cable Length [mm]: 570
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.472
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Construction Year to: 07.2013
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Engine Code: M 273.922
- Number of circuits: 5
- Length [mm]: 600
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: before catalytic converter
- Cable Length [mm]: 600
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Warranty: 3 years warranty
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Construction Year to: 07.2010
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 560
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Broadband lambda sensor
- Number of circuits: 5
- Overall Length [mm]: 560
- Manufacturer: FAST
- Fitting Position: before catalytic converter
- Lambda Sensor: Broadband lambda sensor
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 570
- Number of pins: 6
- Name: Lambda andur
- Manufacturer: MEY
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 540
- Number of circuits: 5
- Manufacturer: ERA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks