• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 63.5
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12.5
• Outer Diameter [mm]: 278
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 80
• Manufacturer: METELLI UKL.HAMULCOWY
• Additional information: 23-0046
• Lisainfo: 23-0046

• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Height [mm]: 71.8
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Minimum thickness [mm]: 8.3
• Name: PIDURIKETAS
• Manufacturer: MAX

• Outer Diameter [mm]: 278
• Brake Disc Thickness [mm]: 12.6
• Brake Disc Type: solid
• Fitting Position: Front Axle
• Height [mm]: 63.5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 80
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Minimum thickness [mm]: 10.6
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Height [mm]: 71.7
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Outer Diameter [mm]: 279
• Centering Diameter [mm]: 67
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Hub Height [mm]: 62
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Height [mm]: 72
• Rim Hole Number: 5
• Brake Disc Type: solid
• Centering Diameter [mm]: 67
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Hub Diameter [mm]: 168
• Weight [kg]: 4.28
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0241/0160
• Surface: Oiled
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Centering Diameter [mm]: 67
• Height [mm]: 69.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG2240
• Additional information: DELBG2240
• Lisainfo: DELBG2240

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Brake Disc Hub Height [mm]: 51.4
• Rim Hole Number: 5
• Height [mm]: 63.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12.6
• Minimum thickness [mm]: 10.6
• Outer Diameter [mm]: 278
• Centering Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 70
• Centering Diameter [mm]: 67
• Outer Diameter [mm]: 279
• Minimum thickness [mm]: 8.3
• Tightening Torque [Nm]: 120
• Manufacturer: BREMBO
• Name: BR 08.1395.40

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 278
• Brake Disc Thickness [mm]: 12.6
• Minimum thickness [mm]: 10.6
• Centering Diameter [mm]: 80
• Height [mm]: 63.3
• Number of Holes: 5
• Thread Size: 15
• Bolt Hole Circle Ø [mm]: 112
• Colour: black
• Surface: painted
• Test Mark: E1 90R-02 C0190/0527
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12.6
• Number of Holes: 5
• Height [mm]: 63
• Centering Diameter [mm]: 80
• Outer Diameter [mm]: 278
• Minimum thickness [mm]: 10.6
• Tightening Torque [Nm]: 120
• Name: BR 08.3189.20
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Height [mm]: 72
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: solid
• Centering Diameter [mm]: 67
• Number of Holes: 5
• Surface: Oiled
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.5
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Height [mm]: 71.8
• Minimum thickness [mm]: 8.3
• Inner Diameter [mm]: 160
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15.3
• Packaging length [cm]: 29.3
• Packaging width [cm]: 29.3
• Packaging height [cm]: 16.5
• Weight [kg]: 4.3
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Construction Year to: 06.1976
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 278
• Brake Disc Thickness [mm]: 12.6
• Minimum thickness [mm]: 10.6
• Brake Disc Type: solid
• Number of Holes: 5
• Surface: Coated
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 63.3
• Centering Diameter [mm]: 80
• Inner Diameter [mm]: 127.5
• Bore Diameter [mm]: 15.2
• Test Mark: E1 90R-02C0165/0505
• Name: PIDURIKETAS
• Manufacturer: ATE

• Construction Year to: 06.1976
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 71.7
• Centering Diameter [mm]: 67
• Inner Diameter [mm]: 160
• Bore Diameter [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0248/0678
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.3
• Centering Diameter [mm]: 67
• Height [mm]: 71.7
• Number of Holes: 5
• Thread Size: 15
• Bolt Hole Circle Ø [mm]: 112
• Drum diameter [mm]: 160
• Colour: black
• Surface: painted
• Test Mark: E190R-02C0204/0525
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 068407
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 273
• Brake Disc Thickness [mm]: 12.6
• Minimum thickness [mm]: 11
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 63.3
• Centering Diameter [mm]: 69.5
• Inner Diameter [mm]: 127.5
• Bore Diameter [mm]: 15
• Test Mark: E1 90R-02C0165/0615
• Name: PIDURIKETAS
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: E1 90R-02C0241/0160
• Brake Disc Type: solid
• Number of Holes: 5
• Supplementary Article/Info 2: without ABS sensor ring, without wheel bearing
• Machining: Untreated
• Outer Diameter [mm]: 279
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 67
• Height [mm]: 70
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"