Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle both sides
- Inner Diameter 1 [mm]: 12
- Weight [kg]: 0.055
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 19.5
- Manufacturer: 3RG
-
Fitting Position: Rear Axle Upper,
Rear Axle Lower - Length [mm]: 26
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
-
Material: Rubber/
Metal - Weight [kg]: 0.035
- Manufacturer: SWAG
- Name: SW 10 61 0050
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Length [mm]: 26
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
-
Material: Rubber/
Metal - Manufacturer: FAST
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- paired article number: VKDS 458030
- Name: SK VKDS458030
- Manufacturer: SKF
- Engine Code: OM 651.955
- Suspension: for vehicles with heavy duty suspension
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21
- Replace in pairs only:
- Shape: slotted
-
for OE number: 906 326 08 81,
2E0 511 413F - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Quality class: PJ
- Name: Stabilizer mount
-
Fitting Position: Rear Axle Upper,
Rear Axle Lower - Length [mm]: 26
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
-
Material: Rubber/
Metal - Weight [kg]: 0.035
- Manufacturer: FEBI BILSTEIN
- Additional information: FE07200
- Lisainfo: FE07200
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 27
- Name: ALT 86072AL
- Manufacturer: ALTE AUTOMOTIVE
-
for SA code: C40,
Z11, Z12 - Fitting Position: Front Axle
- Weight [kg]: 0.109
- Inner Diameter [mm]: 20
- Packaging length [cm]: 5.6
- Packaging width [cm]: 5.4
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST
- Inner Diameter [mm]: 19
- Fitting Position: Rear Axle
- Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG 00721538
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 19
- Required quantity: 2
- Manufacturer: FAST
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 20
- Manufacturer: TEDGUM
- Name: TG TED61310
-
Material: PU
(Polyurethane) -
Fitting Position: inner,
Front Axle - Inner Diameter [mm]: 15
- Required quantity: 2
- Manufacturer: TEDGUM
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer link mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
-
for SA code: -
ZG1- ZG2- ZG3- ZG4+C40 - Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [kg]: 0.157
- Inner Diameter [mm]: 16
- Packaging length [cm]: 5.8
- Packaging width [cm]: 5.3
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [g]: 150
- Name: IM 32025
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Inner Diameter [mm]: 20
- Outer Diameter [mm]: 45
- Length [mm]: 52
- Required quantity: 2
- Mounting Type: Rubber Mount
- Height [mm]: 47
- Name: ALT 88159AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20
- Inner Diameter [mm]: 18.5
- Length [mm]: 60
- Width [mm]: 48
- Height [mm]: 52
- for OE number: 2E0411041E
- Manufacturer: SASIC
-
Fitting Position: Rear Axle,
outer, Upper - paired article number: 1
- Inner Diameter 1 [mm]: 12.2
- Outer Diameter 1 [mm]: 32
- Thickness 1 [mm]: 36
- Manufacturer: DELPHI
- Name: DE TD1831W
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 20
- paired article number: VKDS 358010
- Manufacturer: SKF
- Name: SK VKDS358010
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 11
- Inner Diameter [mm]: 9.5
- Length [mm]: 56
- Width [mm]: 48
- Height [mm]: 47
- for OE number: 9063262181
- Manufacturer: SASIC
- Engine Code: OM 651.955
- Suspension: for vehicles with standard suspension
-
Drive Type: Rear-
Wheel Drive - Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 52
- Width [mm]: 47
- Thickness [mm]: 57
- Inner Diameter [mm]: 16
- Fitting Position: Front Axle
- Weight [kg]: 0.15
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 31.5
- Inner Diameter [mm]: 30
- Length [mm]: 75
- Width [mm]: 70
- Height [mm]: 60
- for OE number: 9063262681
- Manufacturer: SASIC
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 28
- Inner Diameter [mm]: 26.5
- Length [mm]: 68
- Width [mm]: 71
- Height [mm]: 57
- for OE number: 9063262581
- Manufacturer: SASIC
- Length [mm]: 52
- Width [mm]: 47
- Thickness [mm]: 57
- Inner Diameter [mm]: 16
- Fitting Position: Front Axle
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 16
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819022610
-
Material: PU
(Polyurethane) -
Fitting Position: inner,
Front Axle - Inner Diameter [mm]: 23
- Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Name: TG 00727799
- Manufacturer: TEDGUM
- Fitting Position: Front Axle Left
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Right
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Quantity per axle: 2
- Fitting Position: Front Axle
- Stabiliser Bar Diameter [mm]: 20
- for PR number: 0AB
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Inner Diameter [mm]: 19
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: PU
(Polyurethane) - Supplementary Article/Info 2: with grease cap
- Manufacturer: TEDGUM
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks