• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Number of Holes: 6
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Number of Holes: 6
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.5
• Rim Hole Number: 6
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 180
• Weight [kg]: 9.14
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.
• Lisainfo: FE17730
• Additional information: FE17730

• for brake disc thickness [mm]: 16.3
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16.3
• Outer Diameter [mm]: 298
• Bolt Hole Circle Ø [mm]: 130
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Brake Disc Type: solid
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 180
• Bore Ø [mm]: 15
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for brake disc thickness [mm]: 28
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Bolt Hole Circle Ø [mm]: 130
• Outer Diameter [mm]: 300
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Rim Hole Number: 6
• Height [mm]: 71
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Hub Height [mm]: 55
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Outer Diameter [mm]: 298
• Centering Diameter [mm]: 85
• Brake Disc Thickness [mm]: 16
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Tyres: for single tyres
• Brake Disc Thickness [mm]: 16.3
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 71.4
• Outer Diameter [mm]: 298
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Weight [kg]: 7.235
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71.2
• Rim Hole Number: 6
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 190
• Weight [kg]: 7.38
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Centering Diameter [mm]: 85
• Height [mm]: 71
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Number of Holes: 6
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Number of Holes: 6
• Test Mark: E1 90R-02C0344/1962
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4033

• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Bolt Hole Circle Ø [mm]: 130
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 14
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Type: Vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 68.4
• Bolt Hole Circle Ø [mm]: 130
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 69
• Outer Diameter [mm]: 300
• Centering Diameter [mm]: 85
• Brake Disc Thickness [mm]: 28
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16.3
• Outer Diameter [mm]: 298
• Height [mm]: 71.4
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Surface: Painted
• Weight [kg]: 15.45
• Minimum thickness [mm]: 14
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 6
• Test Mark: E1 90R-02C0343/1200
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Height [mm]: 68.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4032

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 68.4
• Outer Diameter [mm]: 300
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Weight [kg]: 9.227
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M1/N1
• Minimum thickness [mm]: 14
• Weight [kg]: 7.3
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

• Tyres: for dual tyres
• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 6
• Thickness [mm]: 93
• Outer Diameter [mm]: 303
• Bolt Hole Circle Ø [mm]: 145
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 120
• Weight [kg]: 9.89
• Name: SW 10 92 7700
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Height [mm]: 71
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Wheel Bolt Bore Ø [mm]: 15
• Number of Holes: 6
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 298
• Height [mm]: 68.4
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Surface: Painted
• Weight [kg]: 18.73
• Minimum thickness [mm]: 25
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Minimum thickness [mm]: 14
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 7.4
• Manufacturer: MINTEX

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 68.4
• Outer Diameter [mm]: 300
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Weight [kg]: 9.227
• Name: SW 10 92 7698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Outer Diameter [mm]: 300
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 68.5
• Manufacturer: LPR

• for SA code: RS3
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Height [mm]: 68.4
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 6
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Parameter: DP1010.11.0267
• Rim Hole Number: 6
• Fitting Position: Rear Axle
• Height [mm]: 71.4
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Number of Holes: 1
• Centering Diameter [mm]: 85
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Height [mm]: 69
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Wheel Bolt Bore Ø [mm]: 15
• Number of Holes: 6
• Brake Disc Type: Vented
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Parameter: DP1010.11.0497
• Rim Hole Number: 6
• Fitting Position: Front Axle
• Height [mm]: 68.4
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Outer Diameter [mm]: 299.6
• Number of Holes: 1
• Centering Diameter [mm]: 85
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Thread Size: 15,3
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Bolt Hole Circle Ø [mm]: 130
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0204/0605
• Name: PIDURIKETAS
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Brake Disc Type: solid
• Minimum thickness [mm]: 14
• Height [mm]: 71
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 6
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Brake Disc Type: Vented
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 68.5
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 155
• Bore Ø [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0047
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 180
• Bore Ø [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0248/1051
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 298
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 14
• Tightening Torque [Nm]: 175
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Thread Size: 15,3
• Brake Disc Type: Vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 68.4
• Bolt Hole Circle Ø [mm]: 130
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0176/0133
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for SA code: RS3
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.4
• Minimum thickness [mm]: 25
• Surface: Coated
• Inner Diameter [mm]: 155
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.6
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 9.3
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Bolt Hole Circle Ø [mm]: 130
• Number of Holes: 6
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Colour: black
• Outer Diameter [mm]: 298
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Minimum thickness [mm]: 14
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 7.4
• Name: HE 8DD355117641
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 25
• Weight [kg]: 9.3
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

Registration Type: permitted for vehicles of Class M1/N1, permitted for vehicles of Class M2/N2

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 69
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 300
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 25
• Tightening Torque [Nm]: 175
• Name: BR 09.9508.11
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Front Axle
• not for SA code: RS3
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.5
• Minimum thickness [mm]: 25
• Surface: Coated
• Inner Diameter [mm]: 154.8
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Weight [kg]: 8.6
• Name: HE 8DD355131891
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• for SA code: RS3
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Height [mm]: 68.4
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Machining: High-carbon
• Number of Holes: 6
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68
• Outer Diameter [mm]: 300
• Manufacturer: FAST

• Engine Code: OM 646.990
• Fitting Position: Front Axle
• Outer Diameter [mm]: 299.5
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Height [mm]: 68.5
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Type: Vented
• Centering Diameter [mm]: 85
• Number of Holes: 6
• Surface: Coated
• Machining: Alloyed/High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 15.5
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Minimum thickness [mm]: 14
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 7.4
• Name: PIDURIKETAS
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Height [mm]: 71
• Weight [kg]: 7.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Tightening Torque [Nm]: 175
• Bolt Hole Circle Ø [mm]: 130
• Surface: Oiled
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: without bolts/screws
• Version: J
• Packaging length [cm]: 31
• Packaging width [cm]: 31
• Packaging height [cm]: 10
• Manufacturer: JURID

• for OE number: 906 421 0012
• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 300
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Height [mm]: 71
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Wheel Bolt Bore Ø [mm]: 15
• Number of Holes: 6
• Brake Disc Type: solid
• Surface: Zink flake coated
• Machining: High-carbon
• Required quantity: 2
• Manufacturer: MEYLE

General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Height [mm]: 69
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Wheel Bolt Bore Ø [mm]: 15
• Number of Holes: 6
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Machining: High-carbon
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.

• Fitting Position: Front Axle
• for SA code: RS3
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.4
• Minimum thickness [mm]: 25
• Surface: Coated
• Inner Diameter [mm]: 155
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.6
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 9.3
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Height [mm]: 68.5
• Weight [kg]: 9.2
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Outer Diameter [mm]: 300
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Tightening Torque [Nm]: 175
• Bolt Hole Circle Ø [mm]: 130
• Surface: Oiled
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: without bolts/screws
• Version: J
• Packaging length [cm]: 32
• Packaging width [cm]: 32
• Packaging height [cm]: 8.5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Engine Code: OM 646.990
• Brake Disc Type: solid
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Machining: High-carbon
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 15.9
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 71
• Bolt Hole Circle Ø [mm]: 130
• Drill Diameter, up to [mm]: 15
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"