Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: M 102.939
- Required quantity: 4
- Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 40
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 17.5
- Gross Weight [g]: 43
- Manufacturer: DENSO
- Name: DN T20TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Fitting Position: Driver side,
Passenger Side - Wiper blade type: Flat wiper blade
- Quantity: 1
- Length [mm]: 530
- Length [inch]: 21
- Matching Adapter: U
- Adapter enclosed: M+A+B
-
Blade material: SBR
(Styrene butadiene rubber) - Technical Information: Product may differ from images
- Name: KLAASIPUHASTAJA KUMM
- Manufacturer: VAL
Additional information: Valeo raamita klaasipuhastaja, multiconnection 530mm. Lisainfo: Valeo raamita klaasipuhastaja, multiconnection 530mm.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- DIN/ISO: 7603
- Material: Copper
- Shape: A Shape
- Weight [kg]: 0.001
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
- Lisainfo: 04054 FEBI
- Additional information: 04054 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Manufacturer: ELRING
- Material: Copper
- Inner Diameter [mm]: 12.5
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 17
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: M 102.939
- Material: Copper
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Shape: A Shape
- Manufacturer: REINZ
- Material: Copper
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 20
- Weight [kg]: 0.007
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 20
- Inner Diameter [mm]: 14
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: M 102.939
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Manufacturer: AJUSA
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Inner Diameter [mm]: 14
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
- Spanner Size: 16
- Electrode Gap [mm]: 0.7
-
Spark Plug: with taper gasket seat,
1 - Earthed Electrode - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 4
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 17.5
- Technical Information Number: S9YC
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8.65
- Packaging width [cm]: 2.45
- Packaging height [cm]: 2.45
- Projection [mm]: 1.5
-
Name: CH OE009/
T10 - Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 15
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 17.5
- Spanner Size: 16
- Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
-
Engine Code: M102.920,
M 102.939 - Electrode Gap [mm]: 0.8
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
- Additional information: BP6EFS
- Lisainfo: BP6EFS
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with taper gasket seat
-
Fitting Position: Passenger Side,
Driver side, Front - Length [mm]: 500
- Length [inch]: 20
- Wiper blade type: Bracket wiper blade without spoiler
- Name: KLAASIPUHASTAJA KUMM
- Manufacturer: MAX
- Transmission ID: 722.4
-
Seal Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.098
-
Name: TIHEND,
OLIVANN- AUTOMAATK.KAST - Manufacturer: FEB
Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M102.920,
M 102.939 - Electrode Gap [mm]: 0.8
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with taper gasket seat
- Transmission ID: 722.4
-
Seal Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.098
- Manufacturer: SWAG
Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Length [mm]: 500
- Manufacturer: JAPKO
- Construction Year from: 05.1984
- Outer Diameter 1 [mm]: 58
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 20
- Height [mm]: 106
- Filter type: Filter Insert
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front
- Length [mm]: 500
- Manufacturer: ASHIKA
- Construction Year to: 02.1985
- Driven Units: Alternator
-
Length [mm]: 1,
000 - Width [mm]: 10
-
Lisainfo: Fan belt for alternator,
10x1000 mm -
Additional information: Fan belt for alternator,
10x1000 mm
- Fitting Position: both sides
- Length [inch]: 20
- Length [mm]: 500
- Wiper blade type: Bracket wiper blade
- Fastening Type: Hook fixing
- Weight [kg]: 0.12
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Length [mm]: 500
-
Supplementary Article/Info 2: with vehicle-
specific adaptor - Matching Adapter: V12
- Manufacturer: MAGNETI MARELLI
- Driven Units: Power steering pump
- Length [mm]: 750
- Width [mm]: 13
-
Belts: Open-
sided, Toothed - Manufacturer: BOSCH
- Name: BS 1987947648
-
Driven Units: Alternator,
Water Pump -
Length [mm]: 1,
005 - Width [mm]: 10
-
Belts: Open-
sided, Toothed - Manufacturer: BOSCH
- Name: BS 1987947625
-
Transmission Type: 4-
Speed Automatic Transmission -
Transmission Code: W 4 A 020,
722.4.. -
Name: Tihend,
olivann- automaatk.kast - Manufacturer: ELR
- Fitting Position: Front
- Length [mm]: 500
- Technical Information Number: Flat
- Manufacturer: ASHIKA
- Fitting Position: Front
- Length [mm]: 500
- Technical Information Number: Flat
- Manufacturer: JAPKO
- Driven Units: Air conditioning compressor
- Length [mm]: 875
- Width [mm]: 13
-
Belts: Open-
sided, Toothed - Name: KIILRIHM
- Manufacturer: BOS
- Filter type: Filter Insert
- Height [mm]: 104.6
- Outer Diameter 1 [mm]: 58.7
- Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 10
- Name: OLIFILTER
- Manufacturer: ALC
- Construction Year to: 04.1984
- Filter type: Filter Insert
- Height [mm]: 105
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 19.5
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Construction Year from: 05.1984
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Height [mm]: 106
- Inner Diameter [mm]: 9
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 19
- Name: Olifilter
- Manufacturer: MAX
- Height [mm]: 26
- Inner Diameter [mm]: 7
- Outer Diameter [mm]: 81
- Outer Diameter 1 [mm]: 78
- Inner Diameter 1 [mm]: 35
-
Name: Hdraulikafilter,
roolimine - Manufacturer: MAX
-
Lisainfo: PF-
533 -
Additional information: PF-
533
- Construction Year from: 05.1984
- Filter type: Filter Insert
- Height [mm]: 105
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 19.5
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Construction Year to: 02.1985
- Driven Units: Alternator
- Tensile Cord Material: Polyester
-
Belt Material: Polychloroprene
(Neoprene) - Colour: black
- Width [mm]: 10
-
Length [mm]: 1,
000 -
Outer Length [mm]: 1,
010 - Manufacturer: GATES
- Construction Year to: 02.1985
- Driven Units: Power steering pump
- Weight [kg]: 0.089
- Length [mm]: 750
- Name: KIILRIHM
- Manufacturer: CON
- Construction Year to: 02.1985
- Driven Units: Alternator
- Weight [kg]: 0.078
-
Length [mm]: 1,
005 - Name: KIILRIHM
- Manufacturer: CON
- Fitting Position: Passenger Side
- Fastening Type: Hook fixing
- Length [mm]: 500
- Length [inch]: 20
- Weight [g]: 118
- Name: TR EF500
- Manufacturer: TRICO
- Construction Year to: 02.1985
- Driven Units: Power steering pump
- Tensile Cord Material: Polyester
-
Belt Material: Polychloroprene
(Neoprene) - Colour: black
- Width [mm]: 13
- Length [mm]: 750
- Outer Length [mm]: 765
- Manufacturer: GATES
- Construction Year to: 04.1984
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Height [mm]: 106
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 30
- Manufacturer: BOSCH
- Outer Diameter [mm]: 81
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 35
- Height [mm]: 26
- Manufacturer: HENGST FILTER
- Construction Year to: 02.1985
- Driven Units: Air conditioning compressor
- Weight [kg]: 0.102
- Length [mm]: 875
- Name: KIILRIHM
- Manufacturer: CON
- Construction Year to: 02.1985
- Driven Units: Air conditioning compressor
- Tensile Cord Material: Polyester
-
Belt Material: Polychloroprene
(Neoprene) - Colour: black
- Width [mm]: 13
- Length [mm]: 875
- Outer Length [mm]: 890
- Name: Kiilrihmad
- Manufacturer: GAT
- Fitting Position: both sides
- Fastening Type: Hook fixing
- Length [mm]: 500
- Supplementary Article/Info 2: without integrated washer fluid jet
- not for country specific design: Great Britain
- Wiper blade type: Flat wiper blade
- Manufacturer: KAVO
- Construction Year from: 05.1984
- Transmission Code: 722.3+722.4
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Filter type: Filter Insert
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic filter,
gearbox -
Additional information: Hydraulic filter,
gearbox
- Fitting Position: Passenger Side
-
Matching Adapter: U-
hook - for OE number: 8250A010
- Length [mm]: 500
- Length [inch]: 20
- Weight [g]: 130
- Wiper blade type: Bracket wiper blade
- Gross Weight [g]: 166
- Manufacturer: DENSO
-
Name: DN DM-
050
- Construction Year from: 05.1984
- Filter type: Filter Insert
- Height [mm]: 105
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 20
- Weight [kg]: 0.107
- Name: VA 586585
- Manufacturer: VALEO
- Construction Year to: 04.1984
- Filter type: Filter Insert
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 20
- Height [mm]: 106
- Manufacturer: HENGST FILTER
- Construction Year to: 04.1984
- Filter type: Filter Insert
- Diameter [mm]: 59
- Height [mm]: 105.5
- Inner Diameter 2 [mm]: 9
- Inner Diameter 3 [mm]: 19.4
- Diameter 4 [mm]: 19.4
- Packaging height [cm]: 11
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Net Weight [g]: 98
- Name: KN OX33D
- Manufacturer: KNECHT
- Fitting Position: Passenger Side
- Wiper blade type: Bracket wiper blade
- Quantity: 1
- Length [mm]: 510
- Length [inch]: 20
- Matching Adapter: U
- Technical Information: Product may differ from images
- Name: KLAASIPUHASTAJA KUMM
- Manufacturer: VAL
- Fitting Position: both sides
- Fastening Type: Hook fixing
- Length [inch]: 20
- Length [mm]: 500
- Wiper blade type: Flat wiper blade
- Weight [kg]: 0.102
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Quantity Unit: Kit
- Length 1 [mm]: 500
- Length 2 [mm]: 500
- Wiper blade type: Bracket wiper blade without spoiler
- Name: Klaasipuhastaja kumm
- Manufacturer: MAX
- Construction Year from: 05.1984
- Filter type: Filter Insert
- Diameter [mm]: 59
- Height [mm]: 105.5
- Inner Diameter 2 [mm]: 9
- Inner Diameter 3 [mm]: 19.4
- Diameter 4 [mm]: 19.4
- Packaging height [cm]: 11
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Net Weight [g]: 90
-
Manufacturer: FILTRY KNECHT /
MAHLE - Name: KN OX34D
- Colour: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.95
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Automatic Transmission
-
Transmission ID: 722.400 -
722.443 -
Filter type: Screen Filter,
Suction Filter -
Supplementary Article/Supplementary Info: without gasket/
seal - Housing Type: Metal Housing
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Height [mm]: 26
- Inner Diameter [mm]: 7
- Outer Diameter [mm]: 81
- Outer Diameter 1 [mm]: 78
- Inner Diameter 1 [mm]: 35
- SVHC: No SVHC present!
- Manufacturer: MANN FILTRY
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: Converter Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Screen Filter
- Manufacturer: JAPKO
- Inner Diameter [mm]: 217
- Outer Diameter [mm]: 403
- Height [mm]: 28
- Inner Diameter 1 [mm]: 239
- Weight [kg]: 0.47
- Filter type: Filter Insert
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Manufacturer: SWAG
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: Converter Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.1984
-
Transmission Code: 722,
1 - Filter type: Screen Filter
- Manufacturer: JAPKO
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Colour: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.95
- Observe service information:
- Manufacturer: SWAG
- Lisainfo: 10 90 8972 SWA
- Additional information: 10 90 8972 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: both sides
- Length [inch]: 20
- Length [mm]: 500
- Wiper blade type: Hybrid Wiper Blade
- Fastening Type: Hook fixing
- Weight [kg]: 0.102
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 05.1984
- for OE number: 000 180 24 09
- Filter type: Filter Insert
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 20
- Height [mm]: 106
- Manufacturer: HENGST FILTER
- Filter type: Filter Insert
- Diameter [mm]: 80.6
- Seal Diameter [mm]: 35
- Height 1 [mm]: 26
- Packaging width [cm]: 2.8
- Packaging length [cm]: 8.2
- Packaging height [cm]: 8.2
- Net Weight [g]: 87
- Manufacturer: KNECHT
- Name: KN HX44
- Transmission Type: Automatic Transmission
-
Transmission ID: 722.400 -
722.443 - Filter type: Screen Filter
- Supplementary Article/Info 2: with filter
- Supplementary Article/Supplementary Info: with seal
- for components see parts list:
- Observe system fill quantity:
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Driver side,
Passenger Side - Wiper blade type: Flat wiper blade
- Quantity: 1
- Length [mm]: 500
- Length [inch]: 20
- Styling: with spoiler
- Name: Klaasipuhastaja kumm
- Manufacturer: VAL
- Construction Year from: 05.1984
- Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Height [mm]: 106
- Inner Diameter [mm]: 9
- Outer Diameter [mm]: 59
- Inner Diameter 1 [mm]: 19
- SVHC: No SVHC present!
- Name: OLIFILTER
- Manufacturer: MAN
- Engine Code: M 102.939
- Required quantity: 4
-
Fuel Type: CNG/
LPG - Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 40
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Platinum Middle Electrode - Thread Length [mm]: 17.5
- Gross Weight [g]: 43
- Manufacturer: DENSO
- Name: DN IT20TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Fitting Position: Passenger Side,
Front -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Matching Adapter: A
- Wiper blade type: Flat wiper blade
- Styling: with spoiler
- Quantity Unit: Piece
- Length [mm]: 500
- Length [inch]: 20
- Similar to picture:
- Manufacturer: CONTINENTAL WYCIERACZKI
- Filter type: Suction Filter
-
Transmission Type: 4-
Speed Automatic Transmission -
Transmission Code: 722.3..,
722.4.. -
not for transmission code: 722.323/
350/ 353, 722.362/ 364/ 365/ 370 - Manufacturer: ELRING
- Fitting Position: Front
- Quantity Unit: Kit
- Length 1 [mm]: 500
- Length 2 [mm]: 500
- Wiper blade type: Bracket wiper blade without spoiler
- Name: KLAASIPUHASTAJA KUMM
- Manufacturer: BOS
- Construction Year from: 05.1984
-
Transmission Code: 722.300-
722.371 - Filter type: Suction Filter
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Filter Insert
- Height [mm]: 25
- Inner Diameter [mm]: 218
- Outer Diameter [mm]: 406
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Required quantity: 4
- Alternatively:
- Electrode Gap [mm]: 1.3
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Pt GE
- Packing Type: Box
- Thread Length [mm]: 17.5
- Technical Information Number: RS8WYPB5
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9.5
- Packaging width [cm]: 2.1
- Packaging height [cm]: 2.1
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CCH9808
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
-
Transmission ID: 722.400-
722.440 -
Transmission Code: 722,
4 -
Transmission Type: 4-
Speed Automatic Transmission - See accessories list for additionally required parts:
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.652
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.1984
-
Transmission Code: 722.200-
722.206, 722, 1 - Height [mm]: 10
- See accessories list for additionally required parts:
- Length [mm]: 135
- Width [mm]: 180
- Weight [kg]: 0.342
- Filter type: Filter Insert
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filter type: Screen Filter
- Manufacturer: JAPKO
- Construction Year from: 05.1984
-
Transmission Code: 722.400-
722.440 - Filter type: Suction Filter
- Length [mm]: 184
- Inner Diameter [mm]: 26
- Width [mm]: 164
- Height [mm]: 21
- Bypass Valve Opening Pressure [bar]: 0.2
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: DENCKERMANN FILTRY
- Construction Year from: 05.1984
- Transmission Code: 722.3+722.4
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
- Manufacturer: MANN FILTRY
- Construction Year from: 05.1984
-
Transmission Code: 722.400-
443 - Filter type: Filter Insert
-
Transmission Type: for 4-
speed automatic transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year from: 05.1984
-
Transmission Code: 722.300-
722.371, 722, 3 - Height [mm]: 21
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- Length [mm]: 183.7
- Width [mm]: 163.5
- Supplementary Article/Info 2: with oil sump gasket
- See accessories list for additionally required parts:
- Weight [kg]: 0.522
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
-
Additional information: V30-
0493 -
Lisainfo: V30-
0493
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.1984
-
Transmission Code: 722.200-
722.206, 722, 1 - Supplementary Article/Supplementary Info: with seal
- See accessories list for additionally required parts:
- Weight [kg]: 0.374
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Number: W4B025
- Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Transmission Code: 722.0,
W 3 B 050, 722.1, W 4 B 025 -
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
Transmission Type: 4-Speed Automatic Transmission, 3-Speed Automatic Transmission
-
Engine Code: M102.920,
M 102.939 - Electrode Gap [mm]: 0.8
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
-
Spark Plug: Iridium Middle Electrode,
Fixed SAE connector -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Construction Year from: 05.1984
- Transmission number from: 722.300
- Vehicle Equipment: for vehicles with automatic transmission
- Transmission number to: 722.371
-
Transmission Type: Manual-
/ optional automatic transmission - Manufacturer: HENGST FILTER
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Fitting Position: Front
- Wiper blade type: Flat wiper blade
- Length 1 [mm]: 500
- Length 2 [mm]: 500
- Quantity Unit: Kit
- Styling: with spoiler
-
Length 1/Length 2 [inch]: 20/
20 - Similar to picture:
- Manufacturer: CONTINENTAL WYCIERACZKI
- Construction Year from: 05.1984
-
Transmission Code: 722.300-
722.371 - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MAN
- Construction Year to: 04.1984
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 167
- Width [mm]: 136
- Height [mm]: 18.5
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
- Manufacturer: MANN FILTRY
- Construction Year to: 04.1984
- Supplementary Article/Supplementary Info: with seal
- See accessories list for additionally required parts:
-
Transmission Code: 722,
1 - Weight [kg]: 0.522
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.1984
-
Transmission Code: 722.400-
722.440 - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Supplementary Article/Supplementary Info: with seal
- Length [mm]: 184
- Width [mm]: 164
- Height [mm]: 21
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MAN
- Transmission number from: 722.300
- Transmission number to: 722.395
- Filter type: Filter Insert
- Length [mm]: 186.5
- Width [mm]: 171
- Height [mm]: 23.6
- Inner Diameter 2 [mm]: 33
- Transmission Code: 722.3
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
-
Recommended change interval [km]: 60,
000 - Packaging width [cm]: 2.9
- Packaging length [cm]: 26
- Packaging height [cm]: 38
- Net Weight [g]: 428
-
Manufacturer: FILTRY KNECHT /
MAHLE - Name: KN HX46D1
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Transmission number from: 722.400
- Transmission number to: 722.440
- Filter type: Filter Insert
- Length [mm]: 169
- Width [mm]: 171
- Height [mm]: 23.6
- Inner Diameter 2 [mm]: 33
- Transmission Code: 722.4
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Packaging width [cm]: 2.9
- Packaging length [cm]: 26
- Packaging height [cm]: 38
- Net Weight [g]: 420
- Name: KN HX46D2
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.88
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: for automatic transmission, Converter Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.7
- Observe service information:
- Manufacturer: SWAG
- Lisainfo: 10 93 0017 SWA
- Additional information: 10 93 0017 SWA
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ Transmission Type: for automatic transmission, Converter Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.1984
-
Transmission Code: 722.200-
722.206 - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 167
- Width [mm]: 136
- Height [mm]: 18.5
- Inner Diameter [mm]: 26
- Bypass Valve Opening Pressure [bar]: 0.2
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks