Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 100
-
Lisainfo: Connecting link for stabilizer,
rear -
Additional information: Connecting link for stabilizer,
rear
- Length [mm]: 102
- Thickness [mm]: 48
-
External Thread Size: M10 x 1,
5 - Thread Length [mm]: 14
- Material: Plastic
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.132
-
Supplementary Article/Info 2: with self-
locking nut - Manufacturer: FEB
- Additional information: F02317
- Lisainfo: F02317
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - Kndmik DB T. W123/126 (SPRINTER ACZNIK KOREKTORA HAM.)
- Fitting Position: Rear Axle
- Rod/Strut: Suspension Rod
- for OE number: 123 320 09 89
- Weight [kg]: 0.145
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Material: Plastic
- Quality class: PJ
- Name: Stabilizer link left=right
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERCEDES 123
(kvaliteediklass: PJ)"
- Length [mm]: 100
- Thickness [mm]: 10
- External Thread Size: M10 x 1
- Thread Length [mm]: 14
- Material: Plastic
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.132
-
Supplementary Article/Info 2: with self-
locking nut - Manufacturer: SWAG
- Name: SW 10 79 0005
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Rod/Strut: Suspension Rod
- Material: Plastic
- Length [mm]: 110
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 818008110
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Length [mm]: 100
- Rod/Strut: Push Rod
-
Thread Size 1: M10X1,
5 - Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 101
- Thread Size: M10x1.5
- Pipe Ø [mm]: 10
- Material: Plastic
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
both sides - Rod/Strut: Suspension Rod
- Material: Plastic
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W123/126 (SPRINTER ACZNIK KOREKTORA HAM.)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Material: Steel
- Quality class: PJ
- Name: Stabilizer link left=right
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 101
-
Thread Size 1: M10x1,
5 -
Thread Size 2: M10x1,
5 - Material: Plastic
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
- Lisainfo: 0160600222
- Additional information: 0160600222
Name: Ootshoovad - Kndmik DB T. W123/126 (SPRINTER ACZNIK KOREKTORA HAM.)
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 110
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 818007710
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- paired article number: VKDS 448024
- Length [mm]: 101
- Rod/Strut: Suspension Rod
- Supplementary Article/Supplementary Info: with synthetic grease
-
Thread Size 1: M10 x 1,
5 - Name: SK VKDS448024
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Width [mm]: 38
- Height [mm]: 85
- Weight [kg]: 0.202
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - Max. Length [mm]: 141
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MB W123 82-85
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MB W123 82-85
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Right,
Front Axle Left - Rod/Strut: Coupling Rod
- Name: COC 49396043
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Coupling Rod
- Length [mm]: 109
-
Thread Size 1: M10x1,
5 -
Thread Size 2: M10x1,
5 - Required quantity: 2
- replacement in pairs recommended:
-
Name: Ootshoovad -
Kndmik DB T. W115/ 1 - Manufacturer: MEY
-
Fitting Position: Rear Axle,
both sides - Rod/Strut: Suspension Rod
- Material: Steel
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks