• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Suspension: for vehicles without electronic suspension control
• Thickness [mm]: 224
• Inner Diameter [mm]: 68
• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 88
• Weight [kg]: 0.09
• Manufacturer: FEB
• Additional information: FE40088
• Lisainfo: FE40088

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. CLA/CLS/C W204/A W176/B W246 LE/PR

• Fitting Position: Front Axle
• Height [mm]: 224
• Required quantity: 2
• replacement in pairs recommended:
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MEY

Braking/Driving Dynamics: for vehicles with electronic drive dynamics control

• Suspension: for vehicles without electronic suspension control
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Length [mm]: 224
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-ME-041
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 562310
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Monotube
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: CFD 562303
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: BM SA0257
• Manufacturer: BREMSI

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: KAVO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Length [mm]: 585
• Length 2 [mm]: 387
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 7108G

• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• max. length [mm]: 588
• min. length [mm]: 394
• Standpipe Diameter [mm]: 40
• Piston Rod Diameter [mm]: 12
• Piston Rod Thread: M10x100
• Name: SN SA95113.07
• Manufacturer: NTN-SNR

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Article number of recommended accessories: 014 741 0000
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye
• Diameter [mm]: 40
• Length 1 [mm]: 575
• Length 2 [mm]: 404
• Piston Rod Diameter [mm]: 12.5
• Manufacturer: TRW

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-ME-040
• Manufacturer: NTY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: MT36X146A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: Amort
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 014 641 0002/S, 014 641 0002, 014 640 0022
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

• for special equipment code: B00
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Diameter [mm]: 54
• Length 1 [mm]: 514
• Length 2 [mm]: 412
• Piston Rod Diameter [mm]: 25
• Manufacturer: TRW

Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X88A
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X88A
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-ME-002
• Suspension: for vehicles with electronic suspension control
• paired article number: A-ME-003
• Shock Absorber System: Monotube
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-ME-003
• Suspension: for vehicles with electronic suspension control
• paired article number: A-ME-002
• Shock Absorber System: Monotube
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper with Rebound Spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Guarantee: 5 years guarantee
• paired article number: C1528L
• Weight [kg]: 3.98
• Operating Mode: Electronic
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

Braking/Driving Dynamics: for vehicles with electronic drive dynamics control

• Fitting Position: Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper with Rebound Spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Guarantee: 5 years guarantee
• paired article number: C1527R
• Weight [kg]: 3.98
• Operating Mode: Electronic
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

Braking/Driving Dynamics: for vehicles with electronic drive dynamics control

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Fabrication Number: A-ME-001
• Suspension: for vehicles with electronic suspension control
• paired article number: A-ME-000
• Shock Absorber System: Twin-Tube
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Fabrication Number: A-ME-000
• Suspension: for vehicles with electronic suspension control
• paired article number: A-ME-001
• Shock Absorber System: Twin-Tube
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Electronically adjustable shock strength
• Guarantee: 5 years guarantee
• paired article number: C2508R
• Weight [kg]: 3.3
• Operating Mode: Electronic
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON

• Fitting Position: Front Axle Right
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Electronically adjustable shock strength
• Guarantee: 5 years guarantee
• paired article number: C2509L
• Weight [kg]: 3.3
• Operating Mode: Electronic
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON