Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: without oil
- Name: ZF 5961.303.474
- Manufacturer: ZF
SVHC: No information available, please contact the manufacturer!
- Transmission ID: 722.902
- Production date from: 21.06.2010
-
Supplementary Article/Supplementary Info: without oil,
with gasket/ seal - for PR number: A89
- See accessories list for additionally required parts:
-
Transmission Type: 7-
Speed Automatic Transmission - Alternatively:
- Quantity Unit: Set
- Supplementary Article/Info 2: with seal ring
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VIEROL
-
Additional information: V30-
2256- BEK VEMO -
Lisainfo: V30-
2256- BEK VEMO
Transmission Code: W7X 700, W7C 1000, K7C 1000, W7B 700, W7C 700, W7N 700, K7X 1000, 722,9, 7G-Tronic Plus General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission number to: 2834526
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Colour of operating fluid: red
- Capacity [litre]: 6
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with seal ring,
with bolts/ screws - Specification: MB 236.14
- not for special equipment code: A89
- Weight [kg]: 6.05
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Colour of operating fluid: blue
- Capacity [litre]: 6
- Specification: MB 236.15
- for special equipment code: A89
- Weight [kg]: 6.369
- Observe service information:
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: FEB
- Lisainfo: 171785 FEBI
- Additional information: 171785 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 722.646
-
Supplementary Article/Supplementary Info: without oil,
with gasket/ seal -
Transmission Code: W5A 900,
W5A 580, W5A 380, W5A 330, 722, 6 -
Transmission Type: 5-
Speed Automatic Transmission - Alternatively:
- Quantity Unit: Set
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission ID: 722.902
- not for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with accessories
-
Alternative Repair Kit: 014 135 1202/
XK, 014 135 1212 - Vehicle Equipment: for vehicles without torque converter drain screw
- Capacity [litre]: 6
- Supplementary Article/Info 2: with oil quantity for standard oil change
- Specification: MB 236.14
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: MEY
Transmission Code: W7X 700, W7N 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722.9 General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Transmission ID: 722.646
- Oil manufacturer recommendation: 236.14
- Vehicle Equipment: for vehicles without torque converter drain screw
-
Transmission Code: W5A 580,
W5A 900, W5A 380, W5A 330, 722, 6 - Capacity [litre]: 5
- Quantity Unit: Set
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Transmission Type: 5-
Speed Automatic Transmission -
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Manufacturer: VAICO
Supplementary Article/Info 2: with seal ring, with oil quantity for standard oil change General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer Approval (licensed): 236.14
- See accessories list for additionally required parts:
- Capacity [litre]: 7
-
Supplementary Article/Supplementary Info: with gasket/
seal - Quantity Unit: Set
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 Transmission Code: W7X 700, 7G-Tronic, W7N 700, K7C 1000, W7C 700, W7C 1000, W7B 700, 722,9 Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission ID: 722.902
- not for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with accessories
-
Alternative Repair Kit: 014 135 1202/
XK - Capacity [litre]: 8
- Supplementary Article/Info 2: with oil quantity for standard oil change
- Specification: MB 236.14
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: MEY
Transmission Code: K7C 1000, W7B 700, W7C 1000, W7C 700, W7N 700, W7X 700, 722.9 Vehicle Equipment: for vehicles without torque converter drain screw, for vehicles with torque converter drain screw General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Transmission ID: 722.646
- Manufacturer Approval (licensed): 236.14
- Vehicle Equipment: for vehicles with torque converter drain screw
- Capacity [litre]: 7
-
Transmission Code: W5A 580,
W5A 900, W5A 380, W5A 330, 722.6 - Quantity Unit: Set
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Transmission Type: 5-
Speed Automatic Transmission -
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Manufacturer: VAI
Supplementary Article/Info 2: with seal ring, with oil quantity for standard oil change General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Name: ZESTAW DO WYMIANY OLEJU W SKRZYNI BIEGOW AUT. DB Z OLEJEM
- for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with accessories
-
Alternative Repair Kit: 014 135 1402/
XK - Capacity [litre]: 10
- Supplementary Article/Info 2: with oil quantity for standard oil change
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: MEY
Vehicle Equipment: for vehicles with start-stop function, for vehicles with torque converter drain screw, for vehicles without torque converter drain screw Transmission Code: W7X 700, W7N 700, W7C 700, W7C 1000, W7B 700, K7X 1000, K7C 1000, 7G-TRONIC +, 722.9 General Information: Our MEYLE-KITS are available with various amounts of oil The MEYLE standard kit (100 135 xxxx) contains the necessary amount of oil for the service interval so that an exact oil change can be performed. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
- Transmission ID: 722.902
- not for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Vehicle Equipment: for vehicles without torque converter drain screw
- Capacity [litre]: 12
- Specification: MB 236.14
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: MEY
Transmission Code: W7X 700, W7N 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722.9 Supplementary Article/Supplementary Info: with oil quantity for comprehensive oil change, with accessories General Information: To ensure compliance with professional standards use special tools when refilling transmission fluid and checking the fluid level.
- Manufacturer Approval (licensed): 236.14
- Capacity [litre]: 11
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with seal ring,
with oil quantity for oil flushing - Quantity Unit: Set
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 Transmission Code: W7N 700, 7G-Tronic, W7X 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722,9 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks