Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Width [mm]: 9.5
- Outer Diameter [mm]: 68
- Inner Diameter [mm]: 46.5
- Fitting Position: Front Axle both sides
- Number of Teeth, ABS ring: 96
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 46.5
- Outer Diameter [mm]: 68.1
- Thickness [mm]: 9.5
- Supplementary Article/Info 2: Magnetic
- Number of Teeth: 96
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.035
- Packaging length [cm]: 8.4
- Packaging width [cm]: 8.4
- Packaging height [cm]: 1
- Manufacturer: FEBEST
-
Fitting Position: Front Axle both sides,
Front Axle -
Manufacturer Restriction: ABS-
Ring magnetisch - Outer Diameter [mm]: 68
- Inner Diameter [mm]: 47
- Width [mm]: 9.5
- Manufacturer: METZGER
- for OE number: 207 540 0317
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Fitting Position: Front Axle
- Inner Diameter [mm]: 46.5
- Width [mm]: 9.5
- Outer Diameter [mm]: 68.1
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Number of pins: 96
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
for SA code: 800,
801, 802, 803 - Fitting Position: Rear Axle Left
- Supplementary Article/Info 2: with cable
-
Length [mm]: 1,
038 - Braking/Drive Dynamics: for vehicles with ABS
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 207 540 0017
- Fitting Position: Front Axle both sides
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
for SA code: 800,
801, 802, 803 - Sensor Type: Active sensor
- Cable Length [mm]: 660
- Number of pins: 2
- Fitting Position: Front Axle
-
Name: Andur,
rattaprete arv - Manufacturer: MEY
- Fitting Position: Front Axle
- Sensor Type: Active sensor
- Number of occupied pins: 2
- Cable Length [mm]: 630
- Manufacturer: DELPHI
- Name: DE SS20500
- Fitting Position: Front Axle
- Overall Length [mm]: 700
- Length [mm]: 31
- Sensor Type: Active sensor
- Socket colour: black
- Cable Length [mm]: 630
- paired article number: 31192
- Weight [kg]: 0.1
- Manufacturer: A.B.S.
- Additional information: 31192 NRF
- Lisainfo: 31192 NRF
- Fitting Position: Rear Axle
-
Overall Length [mm]: 1,
110 - Length [mm]: 31
- Sensor Type: Active sensor
- Socket colour: black
-
Cable Length [mm]: 1,
040 - paired article number: 31193
- Weight [kg]: 0.11
- Manufacturer: A.B.S.
- Fitting Position: Rear Axle
- Sensor Type: Active sensor
- Number of occupied pins: 2
- Cable Length [mm]: 958
- Manufacturer: DELPHI
- Name: DE SS20501
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right - Cable Length [mm]: 958
- Sensor Type: Active sensor
- Number of pins: 2
- Manufacturer: OPTIMAL ZAWIESZENIE
- Length [mm]: 701
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 2
- Fitting Position: Front Axle
-
not for SA code: 800/
801/ 802/ 803 - Length [mm]: 705
- MAPP code available:
- Manufacturer: ATE
-
for SA code: 800/
801, 802/ 803 -
Length [mm]: 1,
035 - Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.05
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for SA code: 800/
801, 802/ 803 -
Length [mm]: 1,
035 - Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.05
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Sensor Type: Active sensor
- Overall Length [mm]: 703
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Length [mm]: 705
- Sensor Type: Active sensor
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Cable Length [mm]: 631
- Weight [kg]: 0.039
-
Name: Andur,
rattaprete arv - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Required quantity: 2
-
for SA code: 800/
801/ 802/ 803 -
Length [mm]: 1,
035 - MAPP code available:
- Manufacturer: ATE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks