• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Length [mm]: 500
• Length [inch]: 20
• Adapter enclosed: M+A+B+C
• Blade material: SBR (Styrene butadiene rubber)
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL

Additional information: Valeo raamita klaasipuhastaja, multiconnection 500mm. Lisainfo: Valeo raamita klaasipuhastaja, multiconnection 500mm.

• Engine Code: OM 364.950
• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: OM 364.950
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 364.950
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Manufacturer: ELRING

• Fitting Position: Front
• Length [mm]: 600
• Manufacturer: KAMOKA WYCIERACZKI

• Transmission ID: 720.505
• Transmission Code: 720,1
• Transmission Type: 4-Speed Automatic Transmission
• Weight [kg]: 0.05
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: 720.505
• Material: Rubber
• Weight [kg]: 0.05
• Transmission Type: for automatic transmission
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 08716 FEBI
• Additional information: 08716 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 60
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 18
• SVHC: No SVHC present!
• Manufacturer: FILTRON-CIĘŻARÓWKI

• Engine Code: OM 364.950, OM 364.952
• Filter type: Filter Insert
• Outer Diameter [mm]: 60
• Height [mm]: 101
• Name: HšDRAULIKAFILTER,ROOLIMINE
• Manufacturer: BOS

• Engine Code: OM 364.950, OM 364.952
• Driven Units: Power steering pump
• Length [mm]: 950
• Width [mm]: 13
• Belts: Open-sided, Toothed
• Name: KIILRIHM
• Manufacturer: BOS

• Filter type: Filter Insert
• Height [mm]: 101
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 60
• Inner Diameter 1 [mm]: 18
• SVHC: No SVHC present!
• Name: FILTER,T™™HšDRAULIKA
• Manufacturer: MAN

• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• Height [mm]: 133
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Height [mm]: 133
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Length [mm]: 597
• Width [mm]: 170
• Height [mm]: 63
• Weight [kg]: 0.759
• Manufacturer: FEBI
• Additional information: 107 819 HP
• Lisainfo: 107 819 HP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1986
• Fitting Position: Front
• Length [mm]: 600
• Length [inch]: 24
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 9XW184107241

• Colour: yellow
• Capacity [litre]: 1
• Weight [kg]: 0.95
• Observe service information:
• Name: AUTOMAATKŽIGUKASTI OLI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 21
• Height [mm]: 137
• Manufacturer: HENGST FILTER

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper
• Alternatively:

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 133
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 78
• Inner Diameter 1 [mm]: 23
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Colour: yellow
• Capacity [litre]: 1
• Weight [kg]: 0.95
• Observe service information:
• Manufacturer: SWAG
• Lisainfo: 10 90 8972 SWA
• Additional information: 10 90 8972 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Diameter [mm]: 83.5
• Height [mm]: 136
• Inner Diameter 2 [mm]: 23
• Inner Diameter 3 [mm]: 23.4
• Net Weight [g]: 129
• Packaging height [cm]: 14.5
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: KNECHT

• Fitting Position: Passenger Side, Driver side
• Matching Adapter: T11, T7
• Quantity: 1
• Length [mm]: 600
• Length [inch]: 24
• Adapter enclosed: T11
• Technical Information: Product may differ from images
• Manufacturer: VALEO

• Construction Year to: 08.1986
• Fitting Position: Front
• Length 1 [mm]: 600
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: BOS

• Height [mm]: 69
• Length [mm]: 598
• Width [mm]: 169
• Filter type: Filter Insert
• Name: OHUFILTER
• Manufacturer: ALC

• Filter type: Filter Insert
• Length [mm]: 597
• Width [mm]: 170
• Height [mm]: 69
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: OM 364.950, OM 364.952
• for OE number: 004 094 67 04
• Filter type: Filter Insert
• Length [mm]: 597.5
• Width [mm]: 170.5
• Height [mm]: 69.5
• Manufacturer: BOSCH

• Filter type: Filter Insert
• Length [mm]: 598
• Width [mm]: 170
• Height [mm]: 70
• Height 1 [mm]: 81
• SVHC: No SVHC present!
• Name: OHUFILTER
• Manufacturer: MAN

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper