Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Driven Units: Alternator
- Block Separation:
- Supplementary Article/Supplementary Info: without accessories
- Width [mm]: 26
- Outer Diameter [mm]: 70
- Manufacturer: KAMOKA
Vehicle Equipment: for vehicles without air conditioning, for vehicles without power steering
- Width [mm]: 23
- Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 69
- Name: CA 500360
- Manufacturer: CAFFARO
- Width [mm]: 23
- Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 64
-
Name: CA 80-
12 - Manufacturer: CAFFARO
- Driven Units: Alternator
- Diameter [mm]: 64
- Width [mm]: 22
- Weight [kg]: 0.241
- Manufacturer: VAICO
Vehicle Equipment: for vehicles with air conditioning, for vehicles without power steering General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Driven Units: Alternator
- Block Separation:
-
Width [mm]: 31,
25 - Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 80
- Weight [kg]: 0.28
- Manufacturer: VAICO
Vehicle Equipment: for vehicles with air conditioning, for vehicles with power steering General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fabrication Number: RNK-
ME- 073 - Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Width [mm]: 22
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Width [mm]: 25.5
- Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 80
-
Fabrication Number: RNK-
ME- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Width of castor bearing surface [mm]: 21.5
- Width [mm]: 31.5
- Outer Diameter [mm]: 64
- Number of grooves: 6
- Material: Plastic
- Weight [kg]: 0.195
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 26
- Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 80
- Manufacturer: CAFFARO ROLKI NAPINACZY
-
Name: CA 21-
18
- for OE number: 601 200 1070
- Diameter [mm]: 64
- Width [mm]: 21.8
- Number of ribs: 6
- Manufacturer: TRUCKTEC
- Outer Diameter [mm]: 64
- Inner Diameter [mm]: 26
- Material: Plastic
- Width [mm]: 32
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: MAX
- Width of castor bearing surface [mm]: 21.5
-
Width [mm]: 21.8,
31.5 - Outer Diameter [mm]: 64
- Number of grooves: 6
- Material: Plastic
- Weight [kg]: 0.195
- Name: SW 10 03 0004
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width 1 [mm]: 26
- Outer Diameter 1 [mm]: 69
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN GA351.01
- Width [mm]: 22
- Material: Plastic
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 70
- Manufacturer: CAFFARO ROLKI NAPINACZY
-
Name: CA 140-
22
- Diameter [mm]: 70
- Width [mm]: 26.5
- Weight [kg]: 0.28
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Driven Units: Alternator
- Diameter [mm]: 70
- Width [mm]: 26
- Number of grooves: 6
- SVHC: No SVHC present!
-
Name: PINGUTUSRULL,
SOONRIHM - Manufacturer: INA
Vehicle Equipment: for vehicles without air conditioning, for vehicles without power steering
- Width 1 [mm]: 26
- Outer Diameter 1 [mm]: 75
- Manufacturer: SNR
- Name: SN GA351.05
- Width of castor bearing surface [mm]: 31.5
- Width [mm]: 26
- Outer Diameter [mm]: 70
- Material: Plastic
- Number of ribs: 6
- Weight [kg]: 0.221
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: FEB
Vehicle Equipment: for vehicles with air conditioning, for vehicles without power steering General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Width of castor bearing surface [mm]: 31.5
- Width [mm]: 26
- Outer Diameter [mm]: 75
- Material: Plastic
- Number of ribs: 6
- Weight [kg]: 0.24
- Name: SW 10 03 0001
- Manufacturer: SWAG
Vehicle Equipment: for vehicles with air conditioning, for vehicles without power steering General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Trim Level: IDLER
- Belt Pulley Ø [mm]: 70
- Height 1 [mm]: 26.4
- Height 2 [mm]: 31.5
- Weight [kg]: 0.3
- Name: DA APV2112
- Manufacturer: DAYCO
- Driven Units: Alternator
- Supplementary Article/Info 2: with grooves
- Material: Plastic
- Number of grooves: 6
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Width [mm]: 26
- Manufacturer: GATES PASKI PRZEWODY
Vehicle Equipment: for vehicles with air conditioning, for vehicles without power steering