Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: GSP
- Quantity per packing unit: 10
- Fitting Position: Front Axle both sides
- Inner Diameter 1 [mm]: 12
- Weight [kg]: 0.055
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle both sides
- Length [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
-
Material: Rubber/
Metal - Manufacturer: FAST
- Quantity per packing unit: 2
- for OE number: 667 320 0073
- Inner Diameter [mm]: 12
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
for special equipment code: 514140 02,
514142 03 - Length [mm]: 34
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 40
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.108
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Axle: 1st front axle
- Block Separation:
- Driver Cab ID: 669.899
-
for special equipment code:
(32) 514131/ 07, (32) 514131/ 10 - Required quantity: 2
- Length [cm]: 50
- Inner Diameter [mm]: 36.5
- Manufacturer: LEMFORDER
- Name: LMI 2774901
SVHC: No information available, please contact the manufacturer!
-
for special equipment code: 514131 02,
514131 08 - Length [mm]: 50
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 50
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for special equipment code: 514131 07,
514131 10 - Length [mm]: 50
- Inner Diameter [mm]: 36.5
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.06
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer link mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
-
Axle: 1st front axle,
1st RA - Block Separation:
- Driver Cab ID: 669.899
- Required quantity: 2
- Thickness [mm]: 30
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 30
- Manufacturer: LEMFORDER
Fitting Position: Torsion Bar at connector rod, Lower Front Axle, Connector rod to console, Upper Front Axle, Rear Axle Lower for special equipment code: (32) 514140/01, (32) 514144/02, (50,32) 514142/01, (50,32) 514142/02, (50,32) 514142/05 SVHC: No information available, please contact the manufacturer!
-
special equipment code from: 514131 01,
514131 06 -
Special equipment code up to: 514131 03,
514131 10 -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.145
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: both sides,
Rear Axle - Required quantity: 2
- paired article number: VKDS 458034
- Height [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32.3
- Name: SK VKDS458034
- Manufacturer: SKF
- for special equipment code: 514132 05
- Length [mm]: 81
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 68
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.18
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- for article number: 318 320 00 73
- Weight [g]: 108
- Guarantee: 3 years guarantee
- Length 1 [mm]: 39
- Width 1 [mm]: 40
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Axle: 1st front axle
- Block Separation:
- Driver Cab ID: 669.899
- Required quantity: 2
- Thickness [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
- Manufacturer: LEMFORDER
Fitting Position: Torsion Bar at connector rod, Lower Front Axle, Connector rod to console, Upper Front Axle for special equipment code: (32) 514140/03, (50,32) 514142/04, (50,32) 514142/06, 670.421, 670.422, 670.423 SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Rear Axle Right -
for special equipment code: 514132 04,
514132 05 - Block Separation:
- Length [mm]: 60
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 74
- Weight [kg]: 0.15
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks