• Exhaust System: for pre-catalytic converter
• for OE number: MHK100840
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 105
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Name: DN DOX-2017

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)"

• Fabrication Number: ECT-BM-011
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) to: 522572
• Thread Size: M12x1.5
• Manufacturer: CALORSTAT BY VERNET

• Vehicle Identification Number (VIN) from: XD511059
• Number of pins: 4
• Socket colour: black
• Connector Shape: round
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 22 mm
• for OE number: 13 62 1 703 993, MEK100160
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 522573
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: YD522573
• Number of pins: 2
• Socket colour: black
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: M 12x1,5
• Spanner Size: 22 mm
• for OE number: 13 62 1 433 076, MEK000030L
• Manufacturer: MEAT&DORIA

• Construction Year to: 10.2005
• Engine Code: 18 K4F
• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Vehicle Identification Number (VIN) to: 522572
• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• for OE number: 13 62 1 433 076
• Manufacturer: TRUCKTEC

• Construction Year to: 10.2005
• Engine Code: 18 K4F
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: LHE1600AA
• Manufacturer: NRF

• Engine Code: 18 K4F
• Housing Colour: white
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 18 K4F
• Housing Colour: brown
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• for OE number: MEK100060
• Weight [kg]: 0.033
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: YD522573
• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: 18 K4F
• Vehicle Identification Number (VIN) from: 522573
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: YD522572
• Number of pins: 2
• Housing Colour: brown
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11174

Fabrication Number: ECM-LR-000

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Construction Year to: 05.2005
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: Andur,kiirus
• Manufacturer: MD

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 14
• Pressure to [kPA]: 104
• for OE number: 12 14 0 872 648, MHK100820
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Number of pins: 4
• Pressure from [kPA]: 15
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11093

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 28
• for OE number: NSC100932
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Connector Shape: oval
• Socket colour: white
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 551396
• Manufacturer: ERA

• Construction Year to: 04.2005
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,300
• Weight [kg]: 0.05
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Fuel Type: Petrol
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: white
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Voltage [V]: 12
• Resistor [Ohm]: 1,300
• Manufacturer Restriction: LUCAS
• Number of pins: 2
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2005
• Vehicle Identification Number (VIN) to: YD522572
• Fitting Position: before catalytic converter
• Lambda Sensor: Heated
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 18 K4F
• Number of pins: 3
• Fitting Depth [mm]: 27.5
• Manufacturer: ERA

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Manufacturer: FAE

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 18 K4F
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.31
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Construction Year to: 05.2005
• Vehicle Identification Number (VIN) from: YD522573
• Block Separation:
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 522572
• Cable Length [mm]: 605
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 605
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV578
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 568
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV730

Exhaust System: after catalytic converter, before catalytic converter

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 522573
• Cable Length [mm]: 540
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Number of mounting bores: 2
• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 117,000
• Voltage from [V]: 0.3
• Voltage to [V]: 4.65
• Number of pins: 4
• Manufacturer: METZGER

• Construction Year to: 05.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: YD 522572
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2005
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: YD 522573
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: 18 K4F
• Vehicle Identification Number (VIN) from: 522573
• Block Separation:
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 05.2005
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 18 K4F
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Construction Year to: 05.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: YD 522572
• Number of circuits: 4
• Overall Length [mm]: 623
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2005
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: YD 522573
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 568
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Transmission Type: Manual Transmission
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Length [mm]: 620
• Number of circuits: 4
• Manufacturer: VDO

Fitting Position: before catalytic converter, after catalytic converter

• Version: AM
• Number of pins: 3
• Rotation Direction: Anticlockwise rotation
• Manufacturer: METZGER