Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender Unit,
coolant temperature
- for OE number: 8342087703
- Spanner Size: 13
- Manufacturer: KAMOKA
- Spanner Size: 13
- Material: Brass
- Number of pins: 1
-
Thread Size: 1/
8" - 28 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Instruments: with water temperature gauge
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 1
- Spanner Size: 12
-
Thread Size: 1/
8 - for OE number: 4671065
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
External Thread Size: 1/
8" - 28 - Spanner Size: 13
- Number of connectors: 1
- Material: Brass
- Weight [kg]: 0.01
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
External Thread [mm]: 3/
8- GAS - Spanner Size: 19 MM
- Manufacturer: JPN
- for OE number: MD 091056
- Number of pins: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Instruments: without water temperature gauge
-
Thread Size: 3/
8x19 BSP - Manufacturer: VERNET
-
Fabrication Number: ECT-
MS- 000 - Manufacturer: NTY
-
Name: NTY ECT-
MS- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Instruments: without water temperature gauge
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
-
Thread Size: 3/
8 - for OE number: MD177572
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S19
-
Thread Size: PT3/
8 - Name: NI 207007
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Instruments: with water temperature gauge
-
Thread Size: 1/
8x28 BSPT - Manufacturer: VERNET
- Instruments: without water temperature gauge
-
Thread Size: 3/
8 x 19 BSP - Colour: black
- Spanner Size: 19
- Number of pins: 2
- Weight [kg]: 0.042
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 2
- Spanner Size: 17
- Thread Size: M16x1.5
- for OE number: 3922021310
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Colour: black
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Instruments: without water temperature gauge
- Housing Colour: black
- Number of pins: 2
-
Thread Size: PT3/
8 - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10327
- Instruments: without water temperature gauge
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 294 - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: 3/
8 GAS - Colour: black
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: black
- Mounting Type: Vertical Screw Fitting
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107121
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Switch Point [°C]: 110,
115 - Number of pins: 2
- Switch point from [°C]: 115
- Switch point to [°C]: 110
- Weight [kg]: 0.028
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks