Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for OE number: MD177969,
MD335431 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 440
- Number of pins: 4
- Weight [g]: 105
- Gross Weight [g]: 138
- Manufacturer: DENSO
-
Name: DN DOX-
1441
Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)"
- Construction Year to: 12.2006
- for OE number: MD 091056
- Number of pins: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: MAGNETI MARELLI
-
Engine Code: 4G63
(SOHC 16V) -
Thread Size: 1/
8 GAS - Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Thread Size: 3/
8 x 19 BSP - Colour: black
- Spanner Size: 19
- Number of pins: 2
- Weight [kg]: 0.042
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: 4G63
(SOHC 16V) -
Thread Size: 3/
8- GAS - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Number of pins: 2
- Housing Colour: black
-
Thread Size: 3/
8x19 BSP - Manufacturer: FAE
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: 4G63
(SOHC 16V) - Number of pins: 3
-
Supplementary Article/Info 2: for camshaft,
without cable - Required quantity: 1
- Sensor Type: Hall Sensor
- Supplementary Article/Supplementary Info: with seal
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 27
- Housing Colour: black
- Connector Shape: oval
- Number of mounting bores: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 09.1996
- Construction Year to: 07.2001
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV913
- Construction Year to: 06.2001
-
Lambda Sensor: Regulating Probe,
Finger probe - Fitting Position: before catalytic converter
-
Engine Code: 4G63
(SOHC 16V) - Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0119
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Vehicle type: L200
- Cable Length [mm]: 410
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: 4G63 Kat.
- Construction Year to: 06.2001
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: 4G63 Kat.
- Construction Year to: 06.2001
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 380
- Available as universal article as well, see article no.: 0258986507
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 09.1996
- Construction Year to: 07.2001
-
Fitting Position: Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Heated, Thread pre- greased -
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: black
- Number of circuits: 4
- Number of pins: 4
- Connector Shape: angular
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.115
- for OE number: MD 177969
- Cable Length [mm]: 350
- Length [mm]: 470
- Number of connectors: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Heated -
Exhaust System: for pre-
catalytic converter - Number of pins: 4
-
Quality: Zr insulated gnd,
OE EQUIVALENT - Cable Length [mm]: 230
- Manufacturer: MEAT&DORIA