• Fitting Position: Front Axle
• for OE number: MB130807
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: SDK-MS-011
• Manufacturer: NTY

• Fitting Position: outer
• Overall Length [mm]: 98
• Internal Thread [mm]: 12 x 1,25
• Thread Length [mm]: 48
• Overall Height [mm]: 70
• Fitted Diameter [mm]: 13.5
• External Thread 1 [mm]: 10 x 1,25
• Manufacturer: ASHIKA
• Lisainfo: 111-05-514
• Additional information: 111-05-514

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle, both sides
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Lisainfo: Tie Rod End

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 80
• Thread Size 1: M12x1.25
• Thread Size 2: M10x1.25
• Weight [kg]: 0.31
• Name: DY 22-09836
• Manufacturer: DYS

• Fitting Position: outer
• Overall Length [mm]: 98
• Internal Thread [mm]: 12 x 1,25
• Thread Length [mm]: 48
• Overall Height [mm]: 70
• Fitted Diameter [mm]: 13.5
• External Thread 1 [mm]: 10 x 1,25
• Manufacturer: JAPKO

• Installatsiooni pool: Esisild, kahepoolne
• Keermetüüp rooliots: koos paremkeermega
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: MB130807
• Thread Size 1: M12X1,25
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 65
• Cone Size [mm]: 13.4
• Thread Size 1: M12X1,25
• Thread Size 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left
• Length [mm]: 79
• Cone Size [mm]: 13.4
• Thread Size 1: M10X1,25
• Thread Size 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 0.32
• Width [mm]: 37
• max. length [mm]: 97
• Height [mm]: 68
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: m12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Name: COC 49400838
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Cone Size [mm]: 13.5
• Length [mm]: 79
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79345AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Weight [kg]: 0.305
• Width [mm]: 46
• max. length [mm]: 101
• Height [mm]: 71
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)"

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 316
• Thread Size 1: MM12X1.25 RHT
• Thread Size 2: MM16X1.5 RHT
• paired article number: 240170
• Weight [kg]: 0.52
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Length [mm]: 78
• Cone Size [mm]: 15
• Shape: straight
• Length 2 [mm]: 17.5
• Thread Size 1: M12X1.25
• Thread Size 2: M10X1.25
• Weight [kg]: 0.36
• Height [mm]: 66.5
• Material: Iron
• Manufacturer: KYB

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Thread Size: FM12X1.25 RHT
• Cone Size [mm]: 13.3
• Length [mm]: 76
• paired article number: 230164
• Weight [kg]: 0.321
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Weight [kg]: 0.559
• Width [mm]: 38
• Material: Steel
• Height [mm]: 40
• max. length [mm]: 330
• Thread Size 1: M12x1,25
• Thread Size 2: M16x1,5
• Quality class: PJ
• Name: Axial joint left=right

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Spanner Size: 14
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Cone Size [mm]: 13.4
• Length [mm]: 67
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79668AL
• Manufacturer: ALTE AUTOMOTIVE

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Name: SW 55 71 0012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, kahepoolne
• Keermetüüp rooliots: koos paremkeermega
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Cone Size [mm]: 14
• Thread Size 1: M16X1.5
• Thread Size 2: M12X1.25
• Axle Joint Length [mm]: 333
• Weight [kg]: 0.63
• Width [mm]: 333
• Material: Iron
• Manufacturer: KAYABA AMORTYZATORY

• Fitting Position: Front Axle
• Length from [mm]: 78
• Thread Size: FM12X1,25R
• Thread Size 1: MM10x1,25R
• Cone Size [mm]: 13.4
• Quality class: PJ
• Name: Tie rod end left=right

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: LEMFORDER
• Name: LMI 1556001

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,25
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Weight [kg]: 0.34
• Thread Size: M12X1.25
• Packaging length [cm]: 10.3
• Packaging width [cm]: 7
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,25
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle both sides
• External Thread 1 [mm]: M16x1,5
• External Thread 2 [mm]: M12x1,25
• Length [mm]: 311
• Weight [kg]: 0.55
• Manufacturer: RTS

• Fitting Position: Front Axle
• Weight [kg]: 0.6
• Thread Size: M12x1,25/M16x1,5
• Packaging length [cm]: 43.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 4
• Manufacturer: MONROE

• Fitting Position: Front Axle, outer
• Weight [kg]: 0.4
• Required quantity: 2
• Internal Thread [mm]: 12x1,25
• Thread Type: with right-hand thread
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 78
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Thread Type: with right-hand thread
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEYLE

• Installatsiooni pool: Esisild, kahepoolne
• Keermetüüp rooliots: koos paremkeermega
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Thread Size 1: M12x1,25 A
• Thread Size 2: M16x1,5 A
• Axle Joint Length [mm]: 315
• SVHC: No SVHC present!
• Manufacturer: FAG