Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle,
Front Axle - Rims: for steel rims
- Thickness [mm]: 17
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Tightening Torque [Nm]: 110
- Weight [kg]: 0.021
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: FE11939
- Lisainfo: FE11939
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Rims: for steel rims
- Thickness [mm]: 17
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Tightening Torque [Nm]: 110
- Weight [kg]: 0.021
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 50
-
Fitting Position: Front Axle,
Rear Axle - Thickness [mm]: 17
-
Thread Size: M12 x 1,
5 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21
- Rims: for steel rims
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Väliskeere [mm]: M 12 x 1,
5 -
Poldipea läbimõõt [mm]: 18,
3 - Manufacturer: OYODO
- Required quantity: 16
- Engine Code: 4G64DOHC
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Quantity per packing unit: 10
- Length [mm]: 47
-
Thread Size: M12 x 1,
5 - Thread Length [mm]: 29
- Quality/ Grade: 10.9
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Transmission Type: Manual Transmission,
Automatic Transmission - Production date to: 200209
- Length [mm]: 47
- Weight [kg]: 0.048
-
Thread Size: M12x1,
5 - Packaging length [cm]: 4.7
- Packaging width [cm]: 1.8
- Packaging height [cm]: 1.8
- Manufacturer: FEBEST
- Quantity per packing unit: 5
- Bolt Head Diameter [mm]: 18.3
- Screw length below head [mm]: 40
- Length [mm]: 46.6
- Weight [kg]: 0.04
- Knurl Diameter [mm]: 14.3
-
External Thread [mm]: M12 x 1,
5 - Quality/ Grade: 10.9
- Surface: Zink flake coated
- Thread Length [mm]: 29.5
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle,
Front Axle - Length [mm]: 47
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 30
- Quality/ Grade: 10.9
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 42
- Bolt/Nut Version: Knurled Bolt
- Knurl Diameter [mm]: 14.3
- Bolt Head Diameter [mm]: 18
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Length [mm]: 47
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 30
- Quality/ Grade: 10.9
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 42
- Bolt/Nut Version: Knurled Bolt
- Knurl Diameter [mm]: 14.3
- Bolt Head Diameter [mm]: 18
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Length [mm]: 47
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 30
- Quality/ Grade: 10.9
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 42
- Bolt/Nut Version: Knurled Bolt
- Knurl Diameter [mm]: 14.3
- Bolt Head Diameter [mm]: 18
- Weight [kg]: 0.04
- Name: SW 80 93 3499
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 200208
- Weight [kg]: 0.086
- Wheel Fastening: Flat Seat
- Packaging length [cm]: 3.7
- Packaging width [cm]: 3
- Packaging height [cm]: 3
- Manufacturer: FEBEST
- Rims: for light alloy rims
- Thickness [mm]: 37.5
- Outer Diameter [mm]: 30
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
-
Bolt/Nut Version: Cap Nut,
with lockwasher - Wheel Fastening: Flat Seat
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.08
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: F26587
- Lisainfo: F26587
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Thickness [mm]: 37.5
- Outer Diameter [mm]: 30
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
-
Bolt/Nut Version: Cap Nut,
with lockwasher - Wheel Fastening: Flat Seat
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.08
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Thickness [mm]: 37.5
- Outer Diameter [mm]: 30
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
-
Bolt/Nut Version: Cap Nut,
with lockwasher - Wheel Fastening: Flat Seat
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.08
- Observe service information:
- Name: SW 81 92 6587
- Manufacturer: SWAG
- Lisainfo: 81 92 6587 SWA
- Additional information: 81 92 6587 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Length [mm]: 47
- Material: Steel
-
Surface: Zinc-
coated - Thread Length [mm]: 30
- Bolt Head Diameter [mm]: 18
- Screw length below head [mm]: 42
- Knurl Diameter [mm]: 14
-
Fabrication Number: KSP-
CH- 000 - Manufacturer: NTY
-
Name: NTY KSP-
CH- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- Lockable: Lockable
- for OE number: M115
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- Lockable: Lockable
- for OE number: M115
- Name: SW 81 92 7057
- Manufacturer: SWAG
- Lisainfo: 81 92 7057 SWA
- Additional information: 81 92 7057 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks