• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Construction Year to: 02.2000
• Exhaust System: for pre-catalytic converter
• for OE number: MD189008
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 108
• Gross Weight [g]: 136
• Manufacturer: DENSO
• Name: DN DOX-1438

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
GALANT V SEDAN (E5/A
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
GALANT V SEDAN (E5/A
(kvaliteediklass: Q)"

• Construction Year to: 02.2000
• for OE number: MD339640, MD348460
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 830
• Number of pins: 4
• Weight [g]: 134
• Supplementary Article/Info 2: with rubber grommet
• Gross Weight [g]: 167
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Spanner Size: 13
• Material: Brass
• Number of pins: 1
• Thread Size: 1/8" - 28
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• for OE number: 8342087703
• Spanner Size: 13
• Manufacturer: KAMOKA

• Length [mm]: 59
• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• Engine Code: 6A13
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: 6A13
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Number of pins: 1
• Plug Type: Blade Terminal
• Colour: black
• Pressure from [bar]: 0.3
• Thread Size: 1/8"x28 BSP
• Spanner Size: 24
• for OE number: MC840219
• Manufacturer: MEAT&DORIA

• Colour: black
• Sensor Type: NTC Sensor
• Connector Shape: round
• Spanner Size: 12
• Number of pins: 1
• Manufacturer: JPN

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8
• for OE number: 4671065
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• for OE number: MD 091056
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: 3/8x19 BSP
• Manufacturer: VERNET

• Pressure [bar]: 0.3
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Thread Size: 1/8 GAS
• Spanner Size: 13
• Number of pins: 1
• Manufacturer: ERA

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

• Engine Code: 6A13
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Manufacturer: FACET

• Engine Code: 6A13
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Thread Size: 1/8 x 28 BSP
• Manufacturer: FAE

• Construction Year from: 10.1996
• Manufacturer: BOSCH

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 1/8x28 BSPT
• Manufacturer: VERNET

• Pressure [bar]: 3
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8
• Name: NI 207007
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Weight [kg]: 0.042
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Flat Plug-in Connector, Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 628, 70
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107651
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: MD303088
• Cable Length [mm]: 480
• Number of pins: 3
• Connector Shape: triangular
• Socket colour: black
• Fabrication Number: ECP-MS-001
• Manufacturer: NTY

• Engine Code: 6A13
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 6A13
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 02.2000
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 03.2000
• Fabrication Number: ESL-MS-003
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Construction Year to: 02.2000
• Fabrication Number: ESL-MS-009
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Construction Year from: 03.2000
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-MS-000
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year from: 10.1996, 03.2000
• Oxygen Sensor: Diagnostic Probe, Regulating Probe, Oxygen Sensor
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter, for cylinder 1-3

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Construction Year from: 03.2000
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Construction Year from: 10.1996, 03.2000
• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

Fitting Position: after catalytic converter, for cylinder 1-3, before catalytic converter

• Construction Year from: 10.1996
• Construction Year to: 02.2000
• Oxygen Sensor: Regulating Probe, Finger probe
• Block Separation:
• Fitting Position: before catalytic converter, for cylinder 4-6
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 03.2000
• Oxygen Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 340
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: 6A13
• Construction Year from: 03.2000
• Fitting Position: Front
• Length [mm]: 500
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.1
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year from: 04.1997
• Fitting Position: after catalytic converter
• Block Separation:
• Construction Year to: 02.2000
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Cable Length [mm]: 580
• Manufacturer: DELPHI
• Name: DE ES20076-12B1

• Oxygen Sensor: Diagnostic Probe
• Construction Year from: 03.2000
• Engine Code: 6A13
• Voltage [V]: 12
• Length [mm]: 420
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 03.2000
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 470
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 10.1996, 03.2000
• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, before catalytic converter

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Engine Code: 6A13
• Construction Year from: 03.2000
• Fitting Position: Left, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.1997
• Quantity: 2
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1996
• Construction Year to: 02.2000
• Oxygen Sensor: Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, for cylinder 1-3, for cylinder 4-6

• Construction Year from: 03.2000
• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Connector Shape: angular
• Socket colour: black
• Number of circuits: 4
• Thread Size: M18 x 1,5
• Weight [kg]: 0.131
• for OE number: MD 351752
• Cable Length [mm]: 290
• Length [mm]: 400
• Number of connectors: 4
• Oxygen Sensor: Heated, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.2000
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 410
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 10.1996
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Number of circuits: 4
• Overall Length [mm]: 380
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Cable Length [mm]: 485
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI