• Pistikkontaktide arv: 2
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• for OE number: MD183399
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: MD183145
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 320
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 123
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
GALANT V SEDAN (E5/A
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
GALANT V SEDAN (E5/A
(kvaliteediklass: Q)"

• Võtmekaugus: 13
• OE-numbri jaoks: 8342087703
• Manufacturer: KAMOKA

• Pikkus (mm): 59
• Korpusevärv: must
• Võtmekaugus: 19
• Manufacturer: KAMOKA

• Lülitusrõhk [bar]: 0,3
• Keermemõõt: 1/8x28 BSPT
• Anduritüüp: kinnine anduri ehitusviis
• Manufacturer: VERNET

• Seerianumber: ECT-HY-000
• Manufacturer: NTY
• Name: NTY ECT-HY-000

• Seerianumber: ECT-MS-000
• Name: NTY ECT-MS-000
• Manufacturer: NTY

• OE-numbri jaoks: MD 091056
• Pistikkontaktide arv: 1
• Kaal (kg): 0,02
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Väliskeerme mõõde: 1/8" - 28
• Võtmekaugus: 13
• Ühenduste arv: 1
• Materjal: Messing
• Kaal (kg): 0,01
• Manufacturer: SWAG
• Name: SW 81 92 8265

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 4G93 (SOHC 16V)
• Surve (bar): 0
• Keermemõõt: 1/8 GAS
• Võtmekaugus: 24
• Name: EP 1.800.094
• Manufacturer: EPS

• Väliskeerme mõõde: 1/8" - 28
• Võtmekaugus: 13
• Ühenduste arv: 1
• Materjal: Messing
• Kaal (kg): 0,01
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: 1/8 GAS
• Võtmekaugus: 13
• Pistikkontaktide arv: 1
• Manufacturer: ERA

• Engine Code: 4G93 (SOHC 16V)
• Keermemõõt: 1/8 GAS
• Võtmekaugus: 13
• Name: EP 1.830.080
• Manufacturer: EPS

• Keermemõõt: 1/8 x 28 BSP
• Manufacturer: FAE

• Montaaživiis: kruvitud
• Pinge [V]: 12
• Surve (bar): 0,4
• Lüliti funktsioon: avaja
• Keermemõõt: 1/8 GAS
• Värv: punane
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6ZF007392001

• Construction Year to: 05.1999
• Manufacturer: BOSCH

• Keermemõõt: 1/8x28 BSPT
• Manufacturer: VERNET

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Pistiku värv: sinine
• Keermemõõt: 3/8"-19BSP
• Anduritüüp: NTC-andur
• Võtmekaugus: 19 mm
• OE-numbri jaoks: 39220 35520, MD-149338, 97036606
• Manufacturer: MEAT&DORIA

• Keermemõõt: 3/8 x 19 BSP
• Värv: must
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Kaal (kg): 0,042
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: 3/8 GAS
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Korpusevärv: must
• Pistikkontaktide arv: 2
• Manufacturer: METZGER

• Pikkus (mm): 59,7
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,04
• Name: SW 80 93 2375
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 3
• Kaal (kg): 0,03
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Name: CE 17SKV243
• Manufacturer: ESEN SKV

• Pikkus (mm): 59,7
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,04
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Takistus [oom]: 2 080, 294
• temperatuurivahemik alates [°C]: 25
• Temperatuurivahemik kuni [°C]: 80
• Keermemõõt: 3/8 GAS
• Värv: must
• Võtmekaugus: 19
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must
• Montaaživiis: Kruvi vertikaalühendus
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Seerianumber: ECP-MS-017
• Manufacturer: NTY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

Pistikkontaktide arv: 3

• Engine Code: 4G93 (SOHC 16V)
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: nukkvõlli jaoks, ilma kaablita
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 27
• Korpusevärv: must
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 1
• Kaal (kg): 0,02
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Engine Code: 4G93 (SOHC 16V)
• Kaablipikkus (mm): 350
• valikuliselt:
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 12
• alternatiivne remondikomplekt: 550334
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

• Lambda Sensor: Regulating Probe
• Engine Code: 4G93 (SOHC 16V)
• Kaablipikkus (mm): 325
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20029-12B1

• Lambda andur: soojendatud
• Pinge [V]: 12
• Pikkus (mm): 385
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Name: CE 09SKV563
• Manufacturer: ESEN SKV

• Construction Year to: 05.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Manufacturer: BOSCH
• Name: BS 0258986602

• for model code: Space Runner
• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 19
• Keermemõõt: 3/8
• OE-numbri jaoks: MD177572