Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 10
- Height [mm]: 41
- Rim Hole Number: 4
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 156
- Weight [kg]: 3
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Brake Disc Thickness [mm]: 18
- Rim Hole Number: 4
- Thickness [mm]: 45.1
- Outer Diameter [mm]: 236
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 16.4
- Centering Diameter [mm]: 64
- Weight [kg]: 3.8
- Observe service information:
- Manufacturer: FEBI HAMULCE
- Quantity per packing unit: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Outer Diameter [mm]: 236
- Height [mm]: 45
- Number of Holes: 4
- Centering Diameter [mm]: 64
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Weight [kg]: 7.35
- Minimum thickness [mm]: 16.4
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Brake Disc Type: Vented
- Number of Holes: 4
-
Test Mark: E1 90R-
02C0074/ 1593 - Surface: Oiled
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG2810
- Fitting Position: Front Axle
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Height [mm]: 45.1
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Type: Vented
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Surface: Oiled
- Bore Diameter up to [mm]: 12.7
- Manufacturer: BOSCH UK£ADY HAMULCOWE
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Bolt Hole Circle Ø [mm]: 64
- Height [mm]: 45.4
- Outer Diameter [mm]: 235.6
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Number of bores: 4
- Brake Disc Type: Vented
- Test Mark: ECE R90 APPROVED
- Surface: Painted
- Tightening Torque [Nm]: 108
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Bolt Hole Circle Ø [mm]: 64
- Height [mm]: 45.4
- Outer Diameter [mm]: 235.6
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Number of bores: 4
- Brake Disc Type: Vented
- Test Mark: ECE R90 APPROVED
- Surface: Painted
- Tightening Torque [Nm]: 108
-
Manufacturer: ASHIKA-
TARCZE - Quantity per packing unit: 2
- Brake Disc Thickness [mm]: 18
- Rim Hole Number: 4
- Thickness [mm]: 45
- Outer Diameter [mm]: 236
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 16.4
- Centering Diameter [mm]: 64
- Weight [kg]: 3.8
- Observe service information:
- Manufacturer: BLUEPRINT
- Quantity per packing unit: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per packing unit: 2
-
Test Mark: ECE-
R90 - Height [mm]: 45
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Outer Diameter [mm]: 236
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 64
- Surface: Painted
- Manufacturer: METELLI UKL.HAMULCOWY
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Rim Hole Number: 4
- Height [mm]: 45
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Outer Diameter [mm]: 236
- Centering Diameter [mm]: 64
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Hub Height [mm]: 27
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Height [mm]: 45
- Rim Hole Number: 4
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Hub Diameter [mm]: 137
- Weight [kg]: 3.64
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Number of Holes: 4
- Height [mm]: 41
- Centering Diameter [mm]: 64
- Outer Diameter [mm]: 236
- Minimum thickness [mm]: 8.4
- Tightening Torque [Nm]: 108
- Manufacturer: BREMBO
- Name: BR 08.A328.10
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Brake Disc Type: Vented
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Number of Holes: 4
-
Thread Size: 12,
5 - Bolt Hole Circle Ø [mm]: 100
- Colour: black
- Surface: Painted
-
Test Mark: E1 90R-
02 C0176/ 0683 - Manufacturer: TRW
- Quality class: Q
- Name: Brake discs
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Number of Holes: 4
- Height [mm]: 45
- Centering Diameter [mm]: 64
- Outer Diameter [mm]: 236
- Surface: Coated
- Minimum thickness [mm]: 16.4
- Tightening Torque [Nm]: 108
- Manufacturer: BREMBO
- Name: BR 09.7056.11
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16.4
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 4
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 45
- Centering Diameter [mm]: 64
- Inner Diameter [mm]: 126
- Bore Diameter [mm]: 12.6
-
Test Mark: E1 90R-
02C0115/ 0121 - Manufacturer: ATE
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 236
- Brake Disc Thickness [mm]: 18
- Height [mm]: 45
- Minimum thickness [mm]: 16.4
- Inner Diameter [mm]: 126
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 64
-
Hole Arrangement/Number: 04/
06 - Wheel Bolt Bore Diameter [mm]: 13
- Packaging length [cm]: 26.3
- Packaging width [cm]: 26.3
- Packaging height [cm]: 13.5
- Weight [kg]: 3.7
- Manufacturer: TEXTAR TARCZE HAMULCOWE
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks