Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: Sünteetiline õli
Spetsifikatsioon: Dexron II / III, Mercon, Mercon V, JASO M 315 1A; MB 23, ZF TE ML 09X /11B /1, MAN 339 type D & F;
Valmistaja vabastus: VW G 052 162 A1; Ni
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.956
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Lisainfo: Poolsünteetiline õli
Viskoossusklass SAE: 75W-90
Spetsifikatsioon: API GL 3/4/5 + MT-1, MIL-L2105 B/C/D; MIL, ZF TE-ML 01,02,05, 0, MAN 341 TL/ 341 typ, MAN 3343 S/SL Valmistaja vabastus: Volvo 97310; Scania
- Width [mm]: 115
- Height [mm]: 225
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 1
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Length [mm]: 60
- Packing Type: Canister
-
Article number of the recommended special tool: V99-
1017 - Weight [kg]: 1.19
- Manufacturer: VAICO
Oil manufacturer recommendation: CAT TO-2, ZF TE-ML 03D, ZF TE-ML 14A, Allison C-4, ZF TE-ML 11A, ZF TE-ML 17C, MAN 339 Typ Z-1/V-1, GM Dexron II D, ZF TE-ML 04D, Mercedes Benz 236,1, Voith 55,6335,32, Ford Mercon General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 12
-
Oil manufacturer recommendation: MIL-
L- 2105 E, G 052 145 S2, 235.8 - Packing Type: Bottle
- Length [mm]: 60
- Transmission Type: for manual transmission
- Colour: yellow
- Height [mm]: 225
- Capacity [litre]: 1
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Oil: Full Synthetic Oil
- Observe service information:
- Width [mm]: 115
- Weight [kg]: 0.9
- Quantity Unit: Box
-
API specification: GL-
4, GL- 5, MT- 1 -
SAE viscosity class: 75W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: 5/
1 - Quantity per packing unit: 12
-
API specification: GL-
5, GL- 4 - Observe service information:
- Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 1
- Recommended change interval [years]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
-
Recommended change interval [km]: 80,
000 - Packing Type: Bottle
- Weight [kg]: 0.9
- Length [mm]: 60
- Width [mm]: 115
- Height [mm]: 225
-
SAE viscosity class: 75W-
80 -
Article number of the recommended special tool: V99-
1017 - Quantity Unit: Box
- Oil: Full Synthetic Oil
- Manufacturer: VAICO
Oil manufacturer recommendation: BMW MTF LT-1, BMW MTF LT-2, BMW MTF LT-3, BMW MTF LT-4, Fiat 9.55550-MZ6, FORD WSS-M2C200-C, FORD WSS-M2C200-D2, GM BOT 303, MB 235.10, NISSAN MT-XZ, NISSAN MT-XZ TL, PSA 71 2330, Land Rover MTF 94, Honda MTF, Honda MTF-II, Honda MTF-III, Tranself NFJ, NFP, Tranself TRJ,TRT,TRZ General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 0.956
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Height [mm]: 230
-
Article number of the recommended special tool: V99-
1017 - Length [mm]: 300
- Width [mm]: 115
- Weight [kg]: 4.567
- Packing Type: Canister
- Quantity Unit: Litre
- Manufacturer: VAICO
Oil manufacturer recommendation: Voith 55,6335,32, Allison C-4, ZF TE-ML 04D, ZF TE-ML 14A, MAN 339 Typ Z-1/V-1, CAT TO-2, ZF TE-ML 11A, GM Dexron II (D), Mercedes Benz 236,1, FORD MERCON, ZF TE-ML 17C, ZF TE-ML 03D, ATF II General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: 5/
1 - Fill quantity [l]: 2.2
-
SAE viscosity class: 75W-
90 -
Oil manufacturer recommendation: DTFR 12B100
(MB 235.
Specification: API GL 4/5, DAF, DTFR 12B100 (MB 235., DTFR 13B100 (MB 235., IVECO, Mack GO-J, MAN 341 Typ Z2, MAN 341 Type Z2, MAN 342 Type M2, MAN M 3343 Typ M, MB 235.0, MB 235.1, MIL-L-2105 B/C/D, MIL-PRF-2105E, Scania STO 1:0, Volvo 97310, ZF TE-ML 02B/05A/07A
-
Transmission Number: 4/
1 - Fill quantity [l]: 7.8
- Oil: Full Synthetic Oil
- Oil manufacturer recommendation: JW
Specification: Aisin Warner AW-1, CHRYSLER 68157995AA, DSI H 6-SPEED TRANSM, Fiat 9.55550-AV2, Fiat 9.55550-AV5, Ford WSS-M2C924-A, GM Dexron VI, Honda ATF DW-1, HYUNDAI NWS-9638, Hyundai SP IV, JAGUAR 02JDE26444, Jaguar Fluid 8432, JW
-
Transmission Number: 4/
1 - Fill quantity [l]: 7.8
- Oil manufacturer recommendation: Idemi
Specification: SP-III & Dia Queen, Allison C-4/TES 295/, ATF LT 71141, Dexron III H, DiaQueenJ2, ETL 7045E, Ford Mercon, Ford Mercon V, Ford WSS-M2C138-CJ, Ford WSS-M2C166-H, Ford WSS-M2C202-B, GM Dexron IID, GM Dexron III, Honda Z1 (except CVT, Hyundai/Mitsubishi S, I, Idemi, Idemitsu K17, Isuzu bes, Mitsubishi SP, SP-II, SP-III
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks