• Transmission Type: Manual Transmission
• for OE number: MD177969, MD335431
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 440
• Number of pins: 4
• Weight [g]: 105
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Name: DN DOX-1441

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)"

• Spanner Size: 13
• for OE number: 8342087703
• Manufacturer: KAMOKA

• Engine Code: 4G63 (SOHC 16V)
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.035
• Manufacturer: EPS

• Engine Code: 4G63 (SOHC 16V)
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Surve (bar): 0,4
• Manufacturer: JPN

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Värv: must
• Anduritüüp: NTC-andur
• Pistikukatte kuju: ümar
• Võtmekaugus: 12
• Pistikkontaktide arv: 1
• Manufacturer: JPN

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8
• for OE number: 4671065
• Manufacturer: NRF

• Number of pins: 1
• Plug Type: Blade Terminal
• Colour: black
• Pressure from [bar]: 0.3
• Thread Size: 1/8"x28 BSP
• Spanner Size: 24
• for OE number: MC840219
• Manufacturer: MEAT & DORIA

• Surve (bar): 0,4
• Keermemõõt: 1/8-GAS
• Võtmekaugus: 24 MM
• Manufacturer: JPN

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: DE SW90016
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• for OE number: MD 091056
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Name: SW 81 92 8265
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.3
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Fabrication Number: ECT-HY-000
• Manufacturer: NTY
• Name: NTY ECT-HY-000

• Engine Code: 4G63 (SOHC 16V)
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Name: EP 1.830.080
• Manufacturer: EPS

• Engine Code: 4G63 (SOHC 16V)
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Manufacturer: FACET

Manufacturer: BOSCH

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Manufacturer: NRF

• Mounting Type: Bolted
• Voltage [V]: 12
• Pressure [bar]: 0.4
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: red
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZF007392001

• Thread Size: 1/8x28 BSPT
• Manufacturer: VERNET

• Pressure [bar]: 3
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD149338
• Manufacturer: NRF

• Thread Size: 3/8 GAS
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• OE-numbri jaoks: MD149338
• Laius (mm): 33
• Kõrgus (mm): 30
• Pikkus (mm): 58
• Kaal (g): 47
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: 4G63 (SOHC 16V)
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: EP 1.830.230
• Manufacturer: EPS

• Engine Code: 4G63 (SOHC 16V)
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 4G63 (SOHC 16V)
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: EP 1.830.144
• Manufacturer: EPS

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: 4G63 (SOHC 16V)
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, without cable
• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27
• Housing Colour: black
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

• Engine Code: 4G63-6F,4G63-AF
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 253813
• Lisainfo: VAL253813
• Additional information: VAL253813

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 380
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: before catalytic converter
• Oxygen Sensor: Heated
• Cable Length [mm]: 410
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: black
• Number of circuits: 4
• Number of pins: 4
• Connector Shape: angular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.115
• for OE number: MD 177969
• Cable Length [mm]: 350
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring