Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 06.2008
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender Unit,
coolant temperature -
Additional information: Sender Unit,
coolant temperature
- Spanner Size: 13
- Material: Brass
- Number of pins: 1
-
Thread Size: 1/
8" - 28 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- for OE number: 8342087703
- Spanner Size: 13
- Manufacturer: KAMOKA
- Length [mm]: 59
- Spanner Size: 19
- Housing Colour: black
- Manufacturer: KAMOKA
-
External Thread Size: 1/
8" - 28 - Spanner Size: 13
- Number of connectors: 1
- Material: Brass
- Weight [kg]: 0.01
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: MD 091056
- Number of pins: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: 3/
8x19 BSP - Manufacturer: VERNET
-
Fabrication Number: ECT-
MS- 000 - Manufacturer: NTY
-
Name: NTY ECT-
MS- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
-
Thread Size: 3/
8 - for OE number: MD177572
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S19
-
Thread Size: PT3/
8 - Name: NI 207007
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Thread Size: 3/
8 x 19 BSP - Colour: black
- Spanner Size: 19
- Number of pins: 2
- Weight [kg]: 0.042
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: MD757541
- Fitting Position: in transmission housing
-
Fabrication Number: ECP-
MS- 015 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: MR420734
- Cable Length [mm]: 340
- Number of pins: 3
- Connector Shape: triangular
-
Fabrication Number: ECP-
MS- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Colour: black
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Housing Colour: black
- Number of pins: 2
-
Thread Size: PT3/
8 - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10327
- Length [mm]: 60
- Spanner Size: 19
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.066
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV845
- Manufacturer: ESEN SKV
- Length [mm]: 60
- Spanner Size: 19
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.04
- Name: SW 80 93 2375
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: 4G18
- Housing Colour: black
-
Thread Size: 3/
8- GAS - Spanner Size: 19
- Manufacturer: FACET
- Engine Code: 4G18
- Housing Colour: black
-
Thread Size: 3/
8- GAS - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Construction Year to: 06.2008
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 294 - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: 3/
8 GAS - Colour: black
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: black
- Mounting Type: Vertical Screw Fitting
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107121
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
- Connector Shape: triangular
- Cable Length [mm]: 340
- Length [mm]: 420
- for OE number: MR420734
-
Name: Andur,
vntvoll - Manufacturer: MD
- Engine Code: 4G18
- Voltage [V]: 12
- Length [mm]: 360
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: BREMI
- Construction Year to: 06.2008
- Number of pins: 3
- Sensor Type: Hall Sensor
- Cable Length [mm]: 330
- Number of mounting bores: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU358380431
- Manufacturer: HELLA
- Number of pins: 3
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Cable Length [mm]: 370
- Alternatively:
- Number of pins: 3
- Alternative Repair Kit: 550353
- Manufacturer: ERA
- Height [mm]: 27
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Number of pins: 3
- Cable Length [mm]: 325
-
Name: ANDUR,
VNTVOLL - Manufacturer: TRI
- Weight [kg]: 0.07
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks