• Construction Year to: 06.2008
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Spanner Size: 13
• Material: Brass
• Number of pins: 1
• Thread Size: 1/8" - 28
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• for OE number: 8342087703
• Spanner Size: 13
• Manufacturer: KAMOKA

• Length [mm]: 59
• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: MD 091056
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: 3/8x19 BSP
• Manufacturer: VERNET

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

Manufacturer: MAGNETI MARELLI

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: 3/8"-19BSP
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: MD182467
• Manufacturer: MEAT&DORIA

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8
• Name: NI 207007
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Weight [kg]: 0.042
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ECP-HY-005
• Manufacturer: NTY

• for OE number: MD757541
• Fitting Position: in transmission housing
• Fabrication Number: ECP-MS-015
• Manufacturer: NTY

• for OE number: MR420734
• Cable Length [mm]: 340
• Number of pins: 3
• Connector Shape: triangular
• Fabrication Number: ECP-MS-006
• Manufacturer: NTY

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

Manufacturer: JPN

• Fitting Position: Exhaust Side
• Transmission Type: 5-Speed Manual Transmission
• Fabrication Number: ECR-MS-001
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 3/8x19 BSP
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

Manufacturer: ASHIKA

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-MS-033
• paired article number: HCA-MS-034
• Manufacturer: NTY

• Length [mm]: 1,070
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Right
• Fabrication Number: HCA-MS-034
• paired article number: HCA-MS-033
• Manufacturer: NTY

• Construction Year to: 06.2008
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV243

• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV845
• Manufacturer: ESEN SKV

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 4G18
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Number of pins: 3
• for OE number: 3931038050
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Engine Code: 4G18
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year to: 06.2008
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 1,040
• Socket colour: black

• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 1,070
• Socket colour: black

• Number of pins: 3
• Connector Shape: triangular
• Cable Length [mm]: 340
• Length [mm]: 420
• for OE number: MR420734
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Fitting Position: Front Axle Right
• Name: Andur, rattap””rete arv
• Manufacturer: MAX
• Lisainfo: 20-0317
• Additional information: 20-0317

• Fitting Position: Front Axle Left
• Name: Andur, rattap””rete arv
• Manufacturer: MAX
• Lisainfo: 20-0316
• Additional information: 20-0316

• Length [mm]: 57.5
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VOLVO S40 1,8 98-
• Manufacturer: BRM

• Engine Code: 4G18
• Voltage [V]: 12
• Length [mm]: 360
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Cable Length [mm]: 720
• Number of pins: 2
• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-MS-036
• paired article number: HCA-MS-035
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-MS-035
• paired article number: HCA-MS-036
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: JPN

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 58
• Number of connectors: 3
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BLP
• Additional information: ADC47204
• Lisainfo: ADC47204

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left Front
• Manufacturer: JAPKO

• Fitting Position: Right Front
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 660
• Socket colour: black

• Construction Year to: 06.2008
• Number of pins: 3
• Sensor Type: Hall Sensor
• Cable Length [mm]: 330
• Number of mounting bores: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380431
• Manufacturer: HELLA

• Length [mm]: 57.5
• Number of connectors: 3
• Weight [kg]: 0.03
• Name: SW 90 93 2575
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 1,100
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Left Front
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Right
• Length [mm]: 1,130
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Right Front
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Length [mm]: 1,100
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Right Rear
• Cable Length [mm]: 640
• Manufacturer: JAPKO

• Transmission Type: Manual Transmission, Automatic Transmission
• Production date to: 200806
• for model code: CS3W
• Fitting Position: Front Axle Left
• Weight [kg]: 0.149
• Packaging length [cm]: 10
• Packaging width [cm]: 9
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission, Automatic Transmission
• Production date to: 200806
• for model code: CS3W
• Fitting Position: Front Axle Right
• Weight [kg]: 0.151
• Packaging length [cm]: 10.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5.2
• Manufacturer: FEBEST

• Engine Code: 4G18
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Fitting Position: Left Rear
• Manufacturer: JAPKO

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,110
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,040
• paired article number: 30973
• Weight [kg]: 0.2
• Manufacturer: A.B.S.
• Lisainfo: FE31119
• Additional information: FE31119

• Fitting Position: Left Front
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Alternatively:
• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Alternative Repair Kit: 550439
• Manufacturer: ERA

• Cable Length [mm]: 370
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550353
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Front Axle Right
• Overall Length [mm]: 1,140
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,070
• paired article number: 31119
• Weight [kg]: 0.14
• Manufacturer: A.B.S.

• Fitting Position: Right Rear
• Cable Length [mm]: 640
• Manufacturer: ASHIKA

Manufacturer: OYODO

• Check OE number:
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Manufacturer: MEYLE

• Fitting Position: Rear Axle Right
• Number of pins: 2
• Cable Length [mm]: 630
• Sensor Type: Active sensor
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Left Rear
• Manufacturer: ASHIKA

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Engine Code: 4G18
• Manufacturer: FACET

• Engine Code: 4G18
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Fitting Position: Rear Axle Left
• Overall Length [mm]: 720
• Length [mm]: 40
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 640
• paired article number: 30974
• Weight [kg]: 0.17
• Manufacturer: A.B.S.

• paired article number: 172073
• Number of connectors: 2
• Resistor [Ohm]: 1,460
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,075
• Weight [kg]: 0.136
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-MS-010
• Manufacturer: NTY

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI
• Lisainfo: 50539 NRF
• Additional information: 50539 NRF

• paired article number: 174641
• Number of connectors: 2
• Resistor [Ohm]: 1,460
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,075
• Weight [kg]: 0.138
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• paired article number: ADBP710076
• Number of connectors: 2
• Resistor [Ohm]: 1,460
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,075
• Weight [kg]: 0.138
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right Rear
• Cable Length [mm]: 640
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Length [mm]: 400
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-MS-011
• Manufacturer: NTY

• Construction Year to: 06.2008
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009121801
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2008
• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle Right
• Required quantity: 1
• Cable Length [mm]: 660
• Fitting Depth [mm]: 40.3
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Engine Code: 4G18
• Number of pins: 3
• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY