• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 69
• Height [mm]: 38.8
• Outer Diameter [mm]: 249.7
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.5
• Number of bores: 4
• Brake Disc Type: solid
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Tightening Torque [Nm]: 108
• Manufacturer: JAPKO

• Braking System: for vehicles with disc brakes on the rear axle
• Brake Disc Hub Height [mm]: 28.5
• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Height [mm]: 38.6
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 250
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Height [mm]: 38.4
• Centering Diameter [mm]: 69
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Fitting Position: Rear Axle
• Number of Holes: 4
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 38
• Outer Diameter [mm]: 250
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 69
• Weight [kg]: 3.39
• Name: PIDURIKETAS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 38
• Outer Diameter [mm]: 250
• Centering Diameter [mm]: 69
• Brake Disc Thickness [mm]: 10
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 38.4
• Outer Diameter [mm]: 250
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 69
• Weight [kg]: 3.39
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0967/2528
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 69
• Height [mm]: 38.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3971

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Number of Holes: 4
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 4
• Thickness [mm]: 46
• Outer Diameter [mm]: 256
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 21.5
• Centering Diameter [mm]: 69
• Weight [kg]: 5.2
• Name: PIDURIKETAS
• Manufacturer: BLP
• Additional information: ADC443102
• Lisainfo: ADC443102

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking/Drive Dynamics: for vehicles with ABS
• Parameter: DP1010.11.1293
• Fitting Position: Rear Axle
• Height [mm]: 38.4
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Number of bores: 4
• Outer Diameter [mm]: 249.9
• Centering Diameter [mm]: 69
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Brake Disc Type: Vented
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 45.6
• Centering Diameter [mm]: 69
• Inner Diameter [mm]: 139
• Bore Ø [mm]: 12.7
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 250
• Height [mm]: 38.4
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.6
• Number of Holes: 4
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Height [mm]: 38.4
• Minimum thickness [mm]: 8
• Inner Diameter [mm]: 146.5
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 12.8
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 3.2
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 69
• Height [mm]: 45.8
• Outer Diameter [mm]: 255.6
• Brake Disc Thickness [mm]: 23.9
• Minimum thickness [mm]: 22
• Number of bores: 4
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Tightening Torque [Nm]: 108
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 38.5
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Type: solid
• Centering Diameter [mm]: 69
• Number of Holes: 4
• Surface: Oiled
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 12.8
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 45.6
• Centering Diameter [mm]: 69
• Number of Holes: 4
• Minimum thickness [mm]: 21.5
• Name: PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-1857
• Additional information: 19-1857

• Braking System: for vehicles with disc brakes on the rear axle
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Height [mm]: 38.4
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Height [mm]: 38.4
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 146.5
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 12.8
• Weight [kg]: 3.2
• Name: HE 8DD355111531
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Manufacturer Restriction: Lucas
• Fitting Position: Front Axle
• Brake Disc Hub Height [mm]: 21.5
• Rim Hole Number: 4
• Height [mm]: 45.6
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Outer Diameter [mm]: 256
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Height [mm]: 38.5
• Thread Size: 12,8
• Centering Diameter [mm]: 69
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 250
• Bolt Hole Circle Ø [mm]: 114.3
• Number of Holes: 4
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0190/0563
• Name: PIDURIKETAS
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 46
• Outer Diameter [mm]: 256
• Centering Diameter [mm]: 69
• Brake Disc Thickness [mm]: 24
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Height [mm]: 38
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 3.1
• Hole Arrangement/Number: 6/4
• Manufacturer: ZIMMERMANN

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 4
• Thickness [mm]: 45.6
• Outer Diameter [mm]: 256
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 21.5
• Centering Diameter [mm]: 69
• Weight [kg]: 5.2
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0964/2526
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Centering Diameter [mm]: 69
• Height [mm]: 45.6
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Manufacturer Restriction: Akebono
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 20
• Height [mm]: 45
• Minimum thickness [mm]: 18.4
• Surface: Coated
• Inner Diameter [mm]: 124.9
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 64
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 12.6
• Weight [kg]: 4.6
• Name: HE 8DD355126941
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Parameter: DP1010.11.1205
• Rim Hole Number: 4
• Fitting Position: Front Axle
• Height [mm]: 45.6
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Outer Diameter [mm]: 256
• Centering Diameter [mm]: 69
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Height [mm]: 39
• Centering Diameter [mm]: 69
• Outer Diameter [mm]: 250
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 108
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 45.6
• Centering Diameter [mm]: 69
• Inner Diameter [mm]: 139
• Bore Ø [mm]: 12.7
• Test Mark: E1 90R-02C0118/0225
• Name: PIDURIKETAS
• Manufacturer: ATE

• Fitting Position: Front Axle
• Manufacturer Restriction: Lucas
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 21.5
• Height [mm]: 45.6
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Height [mm]: 38.5
• Weight [kg]: 6.47
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 250
• Number of Holes: 4
• Centering Diameter [mm]: 69
• Tightening Torque [Nm]: 108
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 28.5
• Packaging width [cm]: 28.5
• Packaging height [cm]: 9.5
• Manufacturer: JURID

• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Height [mm]: 45.6
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.7
• Number of Holes: 4
• Brake Disc Type: Vented
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Height [mm]: 38.4
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 146.5
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 12.8
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 3.2
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 250
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Number of Holes: 4
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 38.6
• Centering Diameter [mm]: 69
• Inner Diameter [mm]: 147
• Bore Ø [mm]: 12.6
• MAPP code available:
• Test Mark: E1 90R-02C0165/1006
• Name: Piduriketas
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Bolt Hole Circle Ø [mm]: 114
• Thread Size: 12,6
• Minimum thickness [mm]: 21.5
• Height [mm]: 45.6
• Centering Diameter [mm]: 69
• Number of Holes: 4
• Colour: black
• Surface: Painted
• Machining: High-carbon
• Test Mark: E190R-02C0185/0096
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Height [mm]: 46
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 21.5
• Weight [kg]: 5.2
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Manufacturer Restriction: Lucas
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.6
• Minimum thickness [mm]: 21.5
• Surface: Coated
• Inner Diameter [mm]: 139
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Ø [mm]: 12.8
• Weight [kg]: 5.1
• Name: HE 8DD355111511
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Manufacturer Restriction: Lucas
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.6
• Minimum thickness [mm]: 21.5
• Surface: Coated
• Inner Diameter [mm]: 139
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Ø [mm]: 12.8
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 12.2
• Weight [kg]: 5.1
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Height [mm]: 45.6
• Weight [kg]: 10.52
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21.5
• Outer Diameter [mm]: 256
• Number of Holes: 4
• Centering Diameter [mm]: 69
• Tightening Torque [Nm]: 108
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 28.5
• Packaging width [cm]: 28.5
• Packaging height [cm]: 11
• Manufacturer: JURID

• Fitting Position: Front Axle
• Manufacturer Restriction: Akebono
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 20
• Height [mm]: 45
• Minimum thickness [mm]: 18.4
• Surface: Coated
• Inner Diameter [mm]: 124.9
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 64
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 12.6
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 4.6
• Name: Piduriketas
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs