• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Length [mm]: 59
• Housing Colour: black
• Spanner Size: 19
• Manufacturer: KAMOKA

• Fabrication Number: ECT-MS-000
• Name: NTY ECT-MS-000
• Manufacturer: NTY

• Thread Size: 3/8x19 BSP
• Manufacturer: VERNET

• Engine Code: 4B12
• Thread Size: M10x1,25
• Spanner Size: 14
• Operating Mode: Mechanical
• Name: LšLITI,SIDURDAMINE(GRA)
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8
• Name: NI 207007
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Weight [kg]: 0.042
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Pressure [bar]: 0.2
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.005
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Pressure from [bar]: 0.1
• Pressure to [bar]: 0.3
• Number of pins: 1
• Corresponds to the original part in colour: grey
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZL003259091

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Voltage [V]: 12
• Thread Size: M10x1,25
• Spanner Size: 14
• Number of pins: 2
• Combi Switch Function: Normally Closed Contact
• Assy./disassy. by qualified personnel required!:
• Name: HE 6DF007364001
• Manufacturer: HELLA

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 4B12
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for OE number: 1865A066, 1920QA
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 23
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-MS-014
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV544

Manufacturer: MAGNETI MARELLI

• Fabrication Number: ECP-MS-002
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Name: DE SS11350
• Manufacturer: DELPHI

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-CT-005

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-CT-006
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year from: 06.2007
• Number of pins: 3

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring

• Housing Type: without housing
• Fabrication Number: EPP-MS-003
• Manufacturer: NTY

• Colour: black
• Supplementary Article/Info 2: without cable
• Number of connectors: 3
• Shape: oval
• Number of pins: 3
• Weight [kg]: 0.022
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Number of connectors: 4
• Length [mm]: 925
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 07.2010
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 450
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV718

• Number of pins: 3
• Fitting Depth [mm]: 23
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Fitting Depth [mm]: 23
• Manufacturer: ERA

• Number of connectors: 3
• Weight [kg]: 0.027
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2010
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 490
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV700

• for OE number: 1588A141
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Fitting Position: Rear
• Weight [kg]: 0.088
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 930
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV717
• Manufacturer: ESEN SKV

• Engine Code: 4B12
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2007
• Construction Year to: 07.2012
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Engine Code: 4B12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 950
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.110
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10203-12B1

• for OE number: 1588A141, 1588A233
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 915
• Number of pins: 4
• Weight [g]: 132
• Gross Weight [g]: 160
• Manufacturer: DENSO
• Name: DN DOX-0574

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor

• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 920
• Manufacturer: DELPHI
• Name: DE ES20414-12B1

• for OE number: 1588A171 / 1588A270, 1588A171
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 460
• Number of pins: 4
• Weight [g]: 109
• Gross Weight [g]: 137
• Manufacturer: DENSO
• Name: DN DOX-0636

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor

• Engine Code: 4B12
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Engine Code: 4B12
• Construction Year from: 09.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Production date from: 01.08.2007
• Production date to: 31.08.2009
• Emission Standard: Euro4/Euro5
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Thread Size: M18 x 1,5
• Manufacturer: METZGER