Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: Sünteetiline õli
Spetsifikatsioon: Dexron II / III, Mercon, Mercon V, JASO M 315 1A; MB 23, ZF TE ML 09X /11B /1, MAN 339 type D & F;
Valmistaja vabastus: VW G 052 162 A1; Ni
Lisainfo: Poolsünteetiline õli
Viskoossusklass SAE: 75W-90
Spetsifikatsioon: API GL 3/4/5 + MT-1, MIL-L2105 B/C/D; MIL, ZF TE-ML 01,02,05, 0, MAN 341 TL/ 341 typ, MAN 3343 S/SL Valmistaja vabastus: Volvo 97310; Scania
- Quantity per packing unit: 12
- Height [mm]: 225
-
Article number of the recommended special tool: V99-
1017 - Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 1
- Chemical Properties: Contains mineral oil
- Length [mm]: 60
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
SAE viscosity class: 80W-
90 -
Weight [kg]: 0.94,
1.19 - Observe service information:
- Packing Type: Bottle
- Width [mm]: 115
- Quantity Unit: Box
- Manufacturer: VAICO
-
Additional information: V60-
0044 VEMO -
Lisainfo: V60-
0044 VEMO
Oil manufacturer recommendation: ZF TE-ML 17A, ZF TE-ML 02B, MIL-L-2105, API GL-4, MAN 341 Typ Z2, MAN 341 Typ E1, Mercedes Benz 235,1, Ford SQM-2C-9008 A General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 12
-
Oil manufacturer recommendation: MIL-
L- 2105 E, G 052 145 S2, 235.8 - Packing Type: Bottle
- Length [mm]: 60
- Transmission Type: for manual transmission
- Colour: yellow
- Height [mm]: 225
- Capacity [litre]: 1
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Oil: Full Synthetic Oil
- Observe service information:
- Width [mm]: 115
- Weight [kg]: 0.9
- Quantity Unit: Box
-
API specification: GL-
4, GL- 5, MT- 1 -
SAE viscosity class: 75W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 12
-
API specification: GL-
5, GL- 4 - Observe service information:
- Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 1
- Recommended change interval [years]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
-
Recommended change interval [km]: 80,
000 - Packing Type: Bottle
- Weight [kg]: 0.9
- Length [mm]: 60
- Width [mm]: 115
- Height [mm]: 225
-
SAE viscosity class: 75W-
80 -
Article number of the recommended special tool: V99-
1017 - Quantity Unit: Box
- Oil: Full Synthetic Oil
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oil manufacturer recommendation: API GL-
4, MIL- L- 2105 - Transmission Type: for manual transmission
-
Article number of the recommended special tool: V99-
1017 - Colour: yellow
- Packing Type: Canister
- Capacity [litre]: 5
- Chemical Properties: Contains mineral oil
-
Recommended change interval [km]: 80,
000 - Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Recommended change interval [years]: 5
- Width [mm]: 115
- Length [mm]: 300
- Height [mm]: 230
- Observe service information:
-
SAE viscosity class: 80W-
90 -
Weight [kg]: 4.49,
4.492 - Quantity Unit: Box
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: 5/
1, 4/ 1 -
SAE viscosity class: 75W-
90 -
Oil manufacturer recommendation: DTFR 12B100
(MB 235.
Specification: API GL 4/5, DAF, DTFR 12B100 (MB 235., DTFR 13B100 (MB 235., IVECO, Mack GO-J, MAN 341 Typ Z2, MAN 341 Type Z2, MAN 342 Type M2, MAN M 3343 Typ M, MB 235.0, MB 235.1, MIL-L-2105 B/C/D, MIL-PRF-2105E, Scania STO 1:0, Volvo 97310, ZF TE-ML 02B/05A/07A
-
Transmission Number: 5/
1, 4/ 1 -
Oil manufacturer recommendation: ZF TE-
ML 02L -
SAE viscosity class: 75W-
80
Specification: 000 km or 3 years), API GL-4, DTFR 13B150 (MB 235., Eaton Europe (300, IVECO, MAN 341 Typ E3, MAN 341 Type E3, MAN 341 Type Z4, MB 235.4, Renault (Note Techni, Volvo 97305, Volvo 97307, ZF TE-ML 01L, ZF TE-ML 02L, ZF TE-ML 08, ZF TE-ML 13, ZF TE-ML 16K
-
Transmission Number: 3/
1, 4/ 1 - Oil manufacturer recommendation: Idemi
Specification: SP-III & Dia Queen, Allison C-4/TES 295/, ATF LT 71141, Dexron III H, DiaQueenJ2, ETL 7045E, Ford Mercon, Ford Mercon V, Ford WSS-M2C138-CJ, Ford WSS-M2C166-H, Ford WSS-M2C202-B, GM Dexron IID, GM Dexron III, Honda Z1 (except CVT, Hyundai/Mitsubishi S, I, Idemi, Idemitsu K17, Isuzu bes, Mitsubishi SP, SP-II, SP-III
-
Transmission Number: 3/
1, 4/ 1 - Oil manufacturer recommendation: Volvo 97341
Specification: Allison C-4, Ford Mercon, GM Dexron IIIH, GM/Opel 19 40 707, MAN 339 Type V2, MAN 339 Type Z3, MB 236.6, Voith 55.6335, Volvo 97341, VW G 052 162, ZF TE-ML 02F/11B/14C, ZF TE-ML 04D/09/14B/
-
Transmission Number: 3/
1, 4/ 1 -
Oil manufacturer recommendation: MAN Typ Z1/
V1
Specification: Allison C-4, Caterpillar TO-2, Ford Mercon, GM Dexron IIIG, MAN 339 Type V2, MAN 339 Z-2, MAN Typ Z1/V1, MB 236.1, Voith 55.6335, Volvo 97341, ZF TE-ML 02F/03D/09/, ZF TE-ML 04D/14A
-
Transmission Number: 3/
1, 4/ 1 - Oil: Full Synthetic Oil
- Oil manufacturer recommendation: VW G 055 025
Specification: Aisin Warner AW-1, ATF-Z1, GM Dexron III, Honda/Kia/Mitsubishi, Hyundai/KIA CVT-1, JWS 3309/3314/3317, JWS 3320 (CVT), MB 236.1 - 236.11, MB 236.20, Mercon SP, Mercon V, Mitsubishi SP-IV, Ni, VW G 052 055, VW G 052 180, VW G 052 516, VW G 055 025
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks