Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Weight [kg]: 0.002
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Gasket Design: Metal Elastomer Gasket
-
Material: NBR
(nitrile butadiene rubber) - Shape: A Shape
-
Alternative Repair Kit: 036.400,
505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 834.823 ELR
- Additional information: 834.823 ELR
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
-
Material: Rubber/
Metal - Weight [kg]: 0.02
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M16x1,
5 - Length [mm]: 12
-
Additionally required articles (article numbers): 542.470.100,
968.330.100 - Manufacturer: FA1 FISCHER
-
Thread Size: M16x1,
5 - Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Alternatively:
- Manufacturer: FISCHER
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Supplementary Article/Info 2: without seal ring
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M16x1,
5x12 - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Manufacturer: DR.MOTOR AUTOMOTIVE
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
- Alternative Repair Kit: 434.940
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
- Length [mm]: 15.5
-
Thread Size: M 16 x 1,
50 x 12 - Supplementary Article/Info 2: with seal ring
- Spanner Size: 8 x 8
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Name: COU 220100S
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
-
Version: incl. 834.823,
incl. 813.052 - Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Name: SW 60 10 1250
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
- Alternatively:
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks