Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- not for vehicle identification number (VIN): SJN**************
- Thickness [mm]: 16
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
25 - Quality/ Grade: 6
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.021
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- not for vehicle identification number (VIN): SJN**************
- Thickness [mm]: 16
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
25 - Quality/ Grade: 6
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.021
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- not for vehicle identification number (VIN): SJN**************
- Thickness [mm]: 16
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
25 - Quality/ Grade: 6
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.021
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN): SJN**************
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 51
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25
- Quality/ Grade: 10.9
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.083
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN): SJN**************
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 51
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25
- Quality/ Grade: 10.9
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.083
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN): SJN**************
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 51
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25
- Quality/ Grade: 10.9
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.092
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Length [mm]: 51
- Thread Length [mm]: 25
-
Thread Size: M12 x 1,
5 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19
-
Quality/ Grade: 10,
9 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front and Rear
- Weight [kg]: 0.092
- External Thread [mm]: M12x150
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Surface: Electrogalvanized
- Weight [g]: 92
- Thread Length [mm]: 25
- Manufacturer: METALCAUCHO
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Overall Length [mm]: 52
- Spanner Size: 19
- Thread Length [mm]: 22
- Bolt Head-/Nut Design: Male Hex
- Strength class: 10.9
- Wheel Fastening: Conical Seat F
- Observe the vehicle manufacturer specifications:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: K9K 276
- Length [mm]: 50
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 19.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Screw length below head [mm]: 23
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Lockable: Lockable
- Observe dimensions:
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: K9K 276
- Length [mm]: 50
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 19.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Screw length below head [mm]: 23
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Lockable: Lockable
- Observe dimensions:
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks