• for OE number: 22630-0M200
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Engine Code: VQ37VHR
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: EP 1.830.225
• Manufacturer: EPS

• Housing Colour: light blue
• Manufacturer: FAE

• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 10.2010
• Cable Length [mm]: 1,420
• Number of pins: 2
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-003
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, after catalytic converter

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Engine Code: VQ37VHR
• Lambda Sensor: Diagnostic Probe, Heated
• Resistor [Ohm]: 3.7
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 400
• Cable Length [mm]: 400
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM172

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: VQ37VHR
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV001
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV569
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.2012
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of connectors: 5
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV138

• Supplementary Article/Supplementary Info: without suction pipe
• for article number: 86286E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Heated
• Resistor [Ohm]: 2.1
• Length [mm]: 375
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 375
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM282

• Construction Year to: 07.2014
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Number of pins: 3
• Colour: black
• Manufacturer: FAE

• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.173
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066681
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: VQ37VHR
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.098
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 07.2014
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: ERA

• Construction Year to: 07.2014
• Fitting Position: Left
• for OE number: 226A0-ET000
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 120
• Name: DN DOX-1732
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368084
• Manufacturer: VALEO

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2012
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 226931NA0A
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 119
• Name: DN DOX-0615
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Construction Year from: 08.2012
• Fitting Position: Left
• for OE number: 226931MR0A, 226933WY0A
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 118
• Manufacturer: DENSO
• Name: DN DOX-0557

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 11.2020
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HITACHI