• Number of pins: 1
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• for OE number: 049919563B
• Manufacturer: KAMOKA
• Lisainfo: 4080049 KAMOKA
• Additional information: 4080049 KAMOKA

• Engine Code: A 20 FD
• Colour Coding: black
• Thread Size: M 12x1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with seal
• for OE number: 12992783
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 55203964
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M12 x 1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S21
• Thread Size: M12*1,5
• Name: NI 207052
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Colour: grey
• Sensor Type: Passive sensor
• for OE number: 46798345
• Manufacturer: KAMOKA

• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PT009309271

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: grey
• Sensor Type: Inductive Sensor
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.032
• Resistor [Ohm]: 790
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 36
• Manufacturer: ERA

• Engine Code: A 20 FD
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.288, 1.880.350, 1.880.811, 1.880.812
• Manufacturer: FACET
• Name: EP 1.830.264

• Height [mm]: 36.5
• Resistor [Ohm]: 900
• Number of connectors: 2
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

Manufacturer: FAST

• Engine Code: A 20 FD
• Name: EP 1.953.440
• Manufacturer: EPS

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 790
• Manufacturer: KAMOKA

• Voltage [V]: 12
• Resistor [Ohm]: 900
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Fitting Position: Flywheel side
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10144

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550734
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• for OE number: 55219298, 22 36 500 02R
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year to: 09.2015
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Construction Year to: 12.2019
• Manufacturer: BOSCH

• Construction Year to: 12.2019
• Manufacturer: BOSCH

• Required quantity: 2
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Housing Colour: black
• Connector Shape: oval
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Overall Length [mm]: 38
• Length [mm]: 610
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 520
• paired article number: 31516
• Weight [kg]: 0.07
• Manufacturer: A.B.S.

Manufacturer: FAST

• Vehicle Identification Number (VIN) from: B4000001, B6000001
• Length [mm]: 59
• Bore Ø [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Overall Length [mm]: 870
• Length [mm]: 27
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 780
• paired article number: 31515
• Weight [kg]: 0.05
• Manufacturer: A.B.S.

• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: oval
• Number of pins: 3
• for OE number: 51 855 119
• Weight [kg]: 0.024
• Vehicle Equipment: for vehicles with diesel soot filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: A 20 FD
• Required quantity: 1
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.082
• Manufacturer: EPS

• for OE number: 51825697
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: EGT-FT-001
• Cable Length [mm]: 530
• Manufacturer: NTY

• Construction Year from: 06.2014
• Frequency Range [MHz]: 433
• Housing Colour: black
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 06.2014
• Frequency Range [MHz]: 433
• Housing Colour: grey
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Engine Code: A 20 FD
• Fitting Position: Rear
• Pressure from [kPA]: 0
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.292
• Manufacturer: EPS

• Construction Year from: 06.2014
• Frequency Range [MHz]: 433
• Housing Colour: black
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 790
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2014
• Frequency Range [MHz]: 433
• Housing Colour: Titanium
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 06.2014
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Manufacturer: BH SENS HUF

• Construction Year to: 12.2019
• Manufacturer: BOSCH

• Housing Type: with housing
• Fabrication Number: EPP-AR-006
• Manufacturer: NTY

• Required quantity: 1
• Supplementary Article/Supplementary Info: with seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 845
• Sensor Type: Active sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

• Fuel Mixture Formation: Common Rail (CR)
• Fabrication Number: EFP-FT-004
• Name: NTY EFP-FT-004
• Manufacturer: NTY

• Warranty: 5 years warranty
• Manufacturer: HITACHI

• Fuel Mixture Formation: Direct Injection
• Supplementary Article/Info 2: High Pressure Side
• Fabrication Number: EFP-FT-000
• Manufacturer: NTY
• Name: NTY EFP-FT-000

• Construction Year from: 06.2014
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: Titanium
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Cable Length [mm]: 530
• Fitting Position: before soot particulate filter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135528
• Manufacturer: HUECO / HITACHI

• Fabrication Number: EFP-FT-005
• Name: NTY EFP-FT-005
• Manufacturer: NTY

• Length [mm]: 50.7
• Thread Size: M18x1,5 mm
• Pressure to [bar]: 1,800
• Number of pins: 3
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 510
• Overall Length [mm]: 630
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.09
• Manufacturer: VALEO

Manufacturer: FAST

• Thread Size: M18X1.5
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,000
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST

• Construction Year from: 02.2015
• Emission Standard: Euro 6
• for OE number: 55250523
• Overall Length [mm]: 400
• Cable Length [mm]: 210
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV357

• for OE number: 51782034
• Manufacturer: KAMOKA

• for OE number: 163675
• Manufacturer: KAMOKA

• Construction Year from: 06.2014
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Construction Year from: 06.2014
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: black
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Engine Code: A 20 FD
• Quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 520
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Construction Year to: 12.2019
• Emission Standard: Euro 5+, Euro 6
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH
• Name: BS 0281006164

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Engine Code: A 20 FD
• Operating Mode: Electric
• Voltage [V]: 5
• Conductor Number: 2
• Cable Length [mm]: 575
• Thread Size: M14 x 1,5
• Total Length [mm]: 640
• Manufacturer: PIERBURG

Manufacturer: MAGNETI MARELLI

• Supplementary Article/Info 2: High Pressure Side
• Pressure to [bar]: 2,000
• Fuel Mixture Formation: Common Rail (CR)
• Thread Size: M18X1,5
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Thickness [mm]: 50
• Thread Length [mm]: 16
• Spanner Size: 27
• Number of connectors: 3
• Weight [kg]: 0.06
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 590
• Fitting Depth [mm]: 55
• Manufacturer: FAST

• Thickness [mm]: 50
• Thread Length [mm]: 16
• Spanner Size: 27
• Number of connectors: 3
• Weight [kg]: 0.06
• Name: SW 50 10 0061
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: High Pressure Side
• Pressure to [bar]: 2,000
• Fuel Mixture Formation: Common Rail (CR)
• Thread Size: M18X1,5
• Manufacturer: MEAT&DORIA

• Engine Code: A 20 FD
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.404
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

Manufacturer: MAGNETI MARELLI

• Engine Code: A 20 FD
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.413
• Manufacturer: EPS

• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 8
• Housing Type: without housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095471

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Alternatively:
• Number of pins: 4
• Outer Diameter 1 [mm]: 70
• Outer Diameter 2 [mm]: 70
• Manufacturer: ERA

• Housing Type: with housing
• Alternatively:
• Number of pins: 4
• Outer Diameter 1 [mm]: 70
• Outer Diameter 2 [mm]: 70
• Manufacturer: ERA

• Housing Type: with housing
• Number of pins: 4
• Outer Diameter 1 [mm]: 70
• Outer Diameter 2 [mm]: 70
• Manufacturer: ERA

• Thread Size: M18 x 1,5
• Number of pins: 3
• Weight [kg]: 0.064
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST