• Fitting Position: Front Axle, inner, Lower, in front of axle
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.32

• Fitting Position: Front Axle, inner, Lower, behind the axle
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.15

• Fitting Position: Front Axle, Lower, Front
• Braking System: not for vehicles with reinforced brakes
• Wheelbase: not for extended wheelbase
• Lisainfo: OPEL OMEGA A, SENATOR B
• Additional information: OPEL OMEGA A, SENATOR B

• Fitting Position: Rear Axle, Lower, inner, outer
• Vehicle Identification Number (VIN) to: L 101 9854, L 515 5054
• Shape: round
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 46.3
• Height [mm]: 70.5
• Lisainfo: OPEL
• Additional information: OPEL

• Fitting Position: Rear Axle, Lower, inner, outer
• Vehicle Identification Number (VIN) from: L 101 9855, L 515 5055
• Mounting Type: Rubber-Metal Mount
• Lisainfo: OPEL OMEGA A / B, SENATOR
• Additional information: OPEL OMEGA A / B, SENATOR

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik OPEL P. OMEGA
• Manufacturer: MAX

• Quantity: 2
• Fitting Position: Front Axle, outer, Rear, Lower
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length from [mm]: 71
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Control/Trailing Arm Type: Trailing Arm
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
OPEL OMEGA A/B
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
OPEL OMEGA A/B
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 34
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, both sides, Front
• Name: Puks - K„„ndmik OPEL P. OMEGA
• Manufacturer: MAX

• Quantity: 2
• Fitting Position: Front Axle, outer
• Manufacturer: DELLO AUTOMEGA

• Special Purpose Vehicle: not for armoured vehicles
• Wheelbase: not for extended wheelbase
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thickness [mm]: 70
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 68
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Right, Left, outer
• Vehicle Identification Number (VIN) to: L5155054, L1019854
• Weight [kg]: 0.17
• Manufacturer: CORTECO

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) to: L1019854, L5155054
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik OPEL T. VECTRA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16
• Width [mm]: 20
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Rear, Lower
• Manufacturer: DELPHI

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL OMEGA A 86-94
(kvaliteediklass: PJ)"

• Special Purpose Vehicle: not for armoured vehicles
• Wheelbase: not for extended wheelbase
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 18, 47
• Material: Rubber/Metal
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.131
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for semi-trailing arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Width [mm]: 71
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle, Rear
• Special Purpose Vehicle: not for ambulances
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle Identification Number (VIN) to: L5155054, L1019854
• Quantity per packing unit: 2
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Axle alignment required after fitting:
• Width [mm]: 71
• Fitting Position: Rear Axle
• Weight [kg]: 0.221
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Right, Left, Front Axle
• Weight [kg]: 0.29
• Name: COC 21652983
• Manufacturer: CORTECO

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 16
• Outer Diameter 1 [mm]: 61
• Thickness 1 [mm]: 70
• Manufacturer: DELPHI ZAWIESZENIE

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.27
• Name: DY 37-08012-5
• Manufacturer: DYS

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 71
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Control/Trailing Arm Type: for semi-trailing arm
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.182
• Name: Puks - K„„ndmik OPEL T. VECTRA
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Special Purpose Vehicle: not for armoured vehicles
• Wheelbase: not for extended wheelbase
• Thickness [mm]: 70
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 68
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.262
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Front
• Special Purpose Vehicle: not for ambulances
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Special Purpose Vehicle: not for armoured vehicles
• Wheelbase: not for extended wheelbase
• Thickness [mm]: 70
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60, 68
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.285
• Name: SW 40 60 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Special Purpose Vehicle: not for armoured vehicles
• Wheelbase: not for extended wheelbase
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41, 47
• Material: Rubber/Metal
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.124
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: L5155055
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Name: Puks - K„„ndmik OPEL P. OMEGA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, both sides, Front
• Name: Puks - K„„ndmik OPEL P. OMEGA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, inner
• Length [mm]: 71
• Weight [kg]: 0.185
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 43
• Control/Trailing Arm Type: Semi-Trailing Arm
• Manufacturer: METALCAUCHO

• Length [mm]: 71
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 43
• Fitting Position: Rear Axle, inner
• Axle alignment required after fitting:
• Weight [kg]: 0.23
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: *********L1019855, *********L5155055
• Length [mm]: 71
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 43
• Control/Trailing Arm Type: for semi-trailing arm
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.185
• Name: Puks - K„„ndmik OPEL T. OMEGA/
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.